Dpf/egr opel meriva

Hi,
I want to try to delete the dpf on this car of a friend, even if he does not need it, I wanted to try to do to see if I understand something ,why? after having tried the 500, and for fear I have not done more? nothing I want to try this!!
I took MPPS V5 I read the file and was not satisfactory, because it was of 200kb then I found you through the numbers of the sw and hw of the control unit, the original file on the network.
Now I thought I would take the file to edit it with Time/carsoft and see ,cut it and insert it into the machine

It should work cos? or have I got it all wrong?'??
In the case in which it blocks all if after I put back the original file in the serial should be good to go?

Thanks to all for the help that you offer

Matthew

mmmm I don't see a better solution to first open bdm then continue with the rest

I do not have a player bdm..are of a MPPS V5

? then at your own risk... Mpps if of good quality, has no problems on the marelli but as they say... you never Know.... While if you have a backup, you can do all the tests you want in the serial... The council ? buy the bdm..... You will come back? useful in many situations

I am very ignorant on the subject,if I try to write it down and it blocks everything I can replace the original file inside the machine via MPPS ?

If you have luck and lets you rewrite it.. If you scratch l eeprom you have to find a backup ? the only solution

The Backup would correspond to the original file of the machine that I found on the net?

in the network you must have found the file that is read in Bdm, and you have to rewrite it in Bdm and usually ? if specified ? Bdm or not.

So... Would it be fair to have the backup of the ecu cos? by the horns there ributti in that ? you do not have problems to acidify because of the key code in a backup on another drive though with both hw and sw, the same things would be different... ? however, you have to write bdm

Then I realized I was wrong to find the file, I found the same file with the hw and sw is the same but ends up with the BDM.fls.From how I understand this type of file is used to write bdm in the event of a fault, etc...
instead, I need the file for MPPS to write a serial port that has to be with the sw and hw are the same, not ? compatible to the bdm right?