my first map...what do you say?

hi to all.....here is my first map....give me suggestions? what should I improve, and what c'? that should not be?
be good ahahahaha
inside c'? the file with all the data of the machine =)

:( guys =)

enrichment and acceleration parts from the 50 and 25, and also change the map so that you have left the original
injection zoned idem, and started 1500giri why? from 1000giri maybe the car smokes
iniziezione fix, leave it original
rail pressure not andae more than 5% increase always by 1500giri and 50%. you have come up to 12%
turbo pressure idem, does not overcome the 7% and also similar maps, you have not done
pressure turbo f temp idem
torque limiter changes the similar maps
pressure limiter turbo edit it as the turbo pressure,
limiter rail idem

the map in the summary should be much improved why? cos? not good
you should try to understand the values in the tables and not only change, with the percentage in the case
the maps pi? easy-to-capie are rail and turbo, where 16000 are 1600bar rail pressure and 2300 are 2.3 bar of turbo pressure

with the tui increases in the rail comes to 1790bar and the turbo to 2.6 bar, and not a fan of good for the engine, all of those bar

Quote:

---

Originally Written by magi1984

enrichment and acceleration parts from the 50 and 25, and also change the map so that you have left the original
injection zoned idem, and started 1500giri why? from 1000giri maybe the car smokes
iniziezione fix, leave it original
rail pressure not andae more than 5% increase always by 1500giri and 50%. you have come up to 12%
turbo pressure idem, does not overcome the 7% and also similar maps, you have not done
pressure turbo f temp idem
torque limiter changes the similar maps
pressure limiter turbo edit it as the turbo pressure,
limiter rail idem

the map in the summary should be much improved why? cos? not good
you should try to understand the values in the tables and not only change, with the percentage in the case
the maps pi? easy-to-capie are rail and turbo, where 16000 are 1600bar rail pressure and 2300 are 2.3 bar of turbo pressure

with the tui increases in the rail comes to 1790bar and the turbo to 2.6 bar, and not a fan of good for the engine, all of those bar

---

thanks magi1984.....prover? to do it again by **** with your suggestions
but in percentages, how much should I give for enrichment and acceleration , injection zoned and torque limiter?

rail pressure not andae more than 5% increase always by 1500giri and 50%. you have come up to 12%.....WHAT DOES it say 50% ?

the table of indicators, rpm,% load, 50% I mean the percentage of load

enrichment, the time and the pair have to be modified according to what you want, cos? go well, then try the car, if you like them please cos?, if you want pi? try to increase them
according to me with the injection split do not need to go over

ok...found out what it means to say 50% ahahahah :)

here is my second attempt....should be more low

winrar tells me the file ? corrupted and can not open it

try now =)

I also tried to raise the injection correction