Luca stanca Lancia ypsilon 75hp

Hi to all guys, I'm trying to defappare this y of my friend engine 1.3 mjt 75 hp ecu marelli 6F3 HW03T 3454Y570, I have already ruled out the EGR valve and reset some of the controls DPF there someone to give me a hand to find the bit to turn the light off dpf? by damos are able to find the area, but on this file is different and I would not like to touch things that don't have anything.
thank you in advance and especially if I've done something wrong correct me, it's my first luca stanca
p.s. I am not in a hurry because the dpf is still on, I attach ori and mod

Try this..
Do you know if and ok..

Quote:

---

Originally Written by cinqueturbo

Try this..
Do you know if and ok..

---

Many thanks very kind as always, tomorrow, my friend should defappare and load the map, the sensors must remain attached or I can also disconnect? Around I read that you had to remove them

I have turned off only the light in the key on and changed guise.
what you did with time?

Quote:

---

Originally Written by cinqueturbo

I have turned off only the light in the key on and changed guise.
what you did with time?

---

No, but with time I have tried it but was going to change things at random, I found on the net a file defappato 500 1.3 and I have compared it with the damos to see what's really varied and I have copied the bits changed on the file accounted only for the light I couldn't find the right bit because the area was similar, but not equal i.e. it was not perfectly aligned, for the rest it's all good right?
Thanks again five x your availability

guys can I ask for the first and u the last bit is changed from cinqueturbo to what you refer???
the damos that I have does not specify......
the first should be fitting I think.....
thanks.....

Quote:

---

Originally Written by joker01

guys can I ask for the first and u the last bit is changed from cinqueturbo to what you refer???
the damos that I have does not specify......
the first should be fitting I think.....
thanks.....

---

Yes, the first up and the last bit indicator

Thanks....
You uploaded the file??

Quote:

---

Originally Written by joker01

Thanks....
You uploaded the file??

---

Not even just my friend defappa and me to port him to load and I know I think tomorrow it is all

I recommend that you reset all of the parameters with respect to the FAP.. also the degradation of the oil, and then write the file..