Vw beetle 1.6 TD ECU Simos PCR 2.1 : opinion map and info addresses

Hi,
if you have some time and curiosity may give a look at this map of a vw Beetle 16 with ECU Simos pcr 2.1. I do not have the driver for the ECM and not use WINOLS and its driver even then I have difficulty to understand the various maps. I attach ORI and MOD defappata and EGRoff. The car goes well enough, only that sfumazza, and at low (1100 to 1400) has a considerable hole of power that I would like to fill but are not sure of where to intervene. Should I intervene on the map accelerator? To which address can I find it? Also the EGR I'm afraid that is not closed : the set of panettone at the address 1CFEA2 - 1CFF60 must be brought to zero? The limiter rpm to 1D2F38 should be well raised as well?
Thanks

the range of panettone that you mentioned for the egr are to be brought to zero, (if you have a functioning valve to the egr bastanp ones) for the rest of the map I can not help, sorry

OK one doubt clarified. Thanks and good make.
I look forward to any other info...below guys, I know that it is a ECU is not easy!!!

gimarras if you can provide me with the id of the ecu I can provide you with all of the addresses that you want to,I can not download the attachment because I don't have a lot of messages.

Then : these data ID:
HW CAYAC
SW 03L906023KB
SW Agg 03L906023KB
Plant 1.6 R4 CR td
I don't mind the curves of the turbo pressure ( increase of 100 points). Maps to the address 1C6768 and 1C87CE I do not understand what they are and how to intervene. The limiter torque 1D2FD6 how much you can increase? And especially after luca stanca how to eliminate turbo lag, from 1100 to 1400 rpm and have a ready answer to those rides. Then up goes well. Thanks for what you tell me. The map mod I have bought but I want to understand how to improve.

What's new? Thanks

fabius8585, do you have any news?
Other?
I'm stuck , I've done several tests, but I don't want to overdo it with the rewrites of the ECU. If someone could give me a hand...

Question like maximum speed, how?

Tool I scored 185 Km/h. It is not particularly fast and even the couple despite the fact the map is not that great. In addition, it is accented with the famous defect of the ticking injectors at a very low rpm. na half ciofeca in short. I have to find a good map. The one I purchased didn't satisfy me.

I still wait for some good soul to me to indicate some address map useful.

thanks!!

mm is probably not the top like the map , but where you have "purchased"? as you put on your car? should do the 183 original(real) then if he makes 185 of the tool probably should be less than the original ! according to me there is more of a mess on this map, unfortunately, I am not a technician, but for what little I can understand some point of the map should be in contrast and creates problems