Discussion: How to set the interval service with MultiEcuScan?

Originally Written by MultiBravo

Just tried it..

Then ? can and it works: go to the ecu "indication of assistance" and select the other button (the "adjustment"..

Now you can set several things: the distance between a service and the other in the days and km, the number of service can be performed, the day of the last service, etc..
So? take the changes you need to? perform the reset service. Let me explain, you can not say that the interval between one and the other goes to 15000km and think that automatically the control unit adapts the remaining, but you have to make precisely the reset that you find it as the last entry of the list.

The only thing that does not work ? to change the days remaining to cut the perch? it tells me operation failed. Also in this case? you can set the limit time e.g. up to 450 days and at the time of the reset takes that value..

I hope I've given you a few tips, you can feel it, too, and then let us know.. good evidence!!!

I'm sorry multibravo I read your interesting guide ,I need to understand and solve this problem .I would like to reprogram the 9 service of the fiat stilo ,in fact at the last service does not make me the most the count, km 20000, and 365 days ,I would like to ask you can do with *********** 2.6 ,or 3.5 because I only have these two versions, recorded, or only with multiecuscan?feel but you can do with cable elm 327 or with the vag and the related adapters .For the procedure you go by the indication of support or instrumentation?feel I would also like to ask if you can enable or disable beeper belts and from where you enter?
thanks a lot

Originally Written by vale

I'm sorry multibravo I read your interesting guide ,I need to understand and solve this problem .I would like to reprogram the 9 service of the fiat stilo ,in fact at the last service does not make me the most the count, km 20000, and 365 days ,I would like to ask you can do with *********** 2.6 ,or 3.5 because I only have these two versions, recorded, or only with multiecuscan?feel but you can do with cable elm 327 or with the vag and the related adapters .For the procedure you go by the indication of support or instrumentation?feel I would also like to ask if you can enable or disable beeper belts and from where you enter?
thanks a lot

reset done and riporgrammato number service thanks to all of you.
Now I can not understand why for fiat stilo does not make me turn on ,the buzzer belts?
I would like to ask you with *********** 3.5 not me do it ,if you step in multiecuscan 1.2 could get me to do this function ?
thanks

enable or disable?

riesumo this old post for a question on multiecuscan 1.7, when you reset the service by setting the mileage and the date of the last intervention, in theory, should be the one the figure reported in the on-board computer, today I have done the reset on a punto evo 2011, I reset everything, but I have a doubt about the date, I put dd/mm/year
while reading I noticed that the previous versions had the setting to mm/dd/year, does anyone know if ? still cos?? then I noticed another thing, when I enter in the ecu the engine tells me distance to next oil change 30,000 km even if I reset the oil change directly in the ecu, maybe something wrong?