View The Full Version : write the fiat bravo 1.6
I have a small problem....... I managed to read a fiat bravo 1.6 120cv with the protocol alfa 159 1.9 edc16, as recommended by fidodido, now I have to risciverci the file with my mpps V5, I want to clarify that the file ? 2 Mb, and, after having selected the alfa 159, etc... and the map , it tells me FILE NOT SUPPORTED... why?? and yet I read quietly
you have selected the correct file?
recheck the files pulled down, the modified one... and the one that you have to write.. and if c'? around another the original file to compare it to avoid any misunderstanding...
with the protocol of the 159 it writes smooth smooth...
you can use also the chroma...
the selected file ? the correct I tried to compare the 2 file is the one downloaded from the machine that changed, and watching with ecm 2001 6.2 mi d? the graphics themselves.....
a question, maybe stupid for? are a beginner, I have not checked the cks even why? not s? how to make it, let's say that I have taken the file that you downloaded from the car , I have it working, and then saved with a name.. I have done well ?
msport (exil77grande)
17-10-2012, 19:44
I have a small problem....... I managed to read a fiat bravo 1.6 120cv with the protocol alfa 159 1.9 edc16, as recommended by fidodido, now I have to risciverci the file with my mpps V5, I want to clarify that the file ? 2 Mb, and, after having selected the alfa 159, etc... and the map , it tells me FILE NOT SUPPORTED... why?? and yet I read quietly
who is fidodido?
if you can' consular me and it happened to me 2 times on 2 alfa mito 1.6 jtdm 120 hp reading all ok scrittua on one of the 2 cars a write ok then nothing more on the other no write everything with kess v2 official fixed in the bdm.
let's say that the checksum corrects him automatically...
should not be the problem.....
to avert try to fix it before writing...
if you want to try to insert ori and mod and see...
who is fidodido?
if you can' consular me and it happened to me 2 times on 2 alfa mito 1.6 jtdm 120 hp reading all ok scrittua on one of the 2 cars a write ok then nothing more on the other no write everything with kess v2 official fixed in the bdm.
the myth ? on line can...
while the bravo should be only for k-line...
for? not s? if the last exit they put it on the can line...
msport (exil77grande)
17-10-2012, 19:51
the myth ? on line can...
while the bravo should be only for k-line...
for? not s? if the last exit they put it on the can line...
you know that the myth is on the can line, but being the same type of car I think that the cos can be connected.
sorry ? a friend of mine who has helped me for the little that he knew....
I cks not? to calculate it, unfortunately, and not s? even as you do, to me, would you kindly hand to calculate it ? thanks a lot
for? I have worked in the k-line to download the original file
now place both the ori and the mod....
the v5 of the mpps will not bill the myth..
for this reason, the good that he has read ? on the k-line,
on the k-line and those ecu with mpps 5 good quality? ? almost impossible to not read them and write them down...
therefore, I believe that there is a human error behind...
is it enough to maybe have the active virus or that it has blocked some files during installation...
but yesterday I loaded a map on my grande punto and it has worked out great despite having the virus...
if it were not good my mpps v5, I would not have even read the bravo, right???
the file that you posted does not ? the original...
they were touched controls the egr and dpf...
and other things...
go to your friend and get the original from those who have put their hand before...
I've downloaded the one from the machine,? true ? without the dpf and the egr's?.. for? my reasoning was, if I downloaded from the ecu automatically I should be able to risciverla no? unfortunately, the original true I do not find it in the database, and my friend has not, unfortunately, the original why? the mapper that has taken away the fap has not given him the ori
have it to give ... that problem...
anyway, try this as well...
works with your... you are a great... for? strange before I've loaded your and went, then I loaded my and went well.......
thanks a lot, very kind............
who is fidodido?
if you can' consular me and it happened to me 2 times on 2 alfa mito 1.6 jtdm 120 hp reading all ok scrittua on one of the 2 cars a write ok then nothing more on the other no write everything with kess v2 official fixed in the bdm.
given that he still has not done it I I;
etente in another forum, sicilian; classified as an expert,x have this qualification just pay off the forum for a subscription and become an expert on the contrary expert.
works with your... you are a great... for? strange before I've loaded your and went, then I loaded my and went well.......
thanks a lot, very kind............
already inserted???
well...
the important ? resolve....
now do not load... thousands of files...
just to see how it interacts....
then who do piss off the ecu from too many scriptures...
msport (exil77grande)
17-10-2012, 21:55
the v5 of the mpps will not bill the myth..
for this reason, the good that he has read ? on the k-line,
on the k-line and those ecu with mpps 5 good quality? ? almost impossible to not read them and write them down...
therefore, I believe that there is a human error behind...
is it enough to maybe have the active virus or that it has blocked some files during installation...
if you're referring to me, I repeat that with 2 different pcs,2 kess v2 official divesri we had the same problem on the same machine obviously there will be a problem in the protocol alien or is just the can line of the machine that breaks.
msport (exil77grande)
17-10-2012, 21:57
given that he still has not done it I I;
etente in another forum, sicilian; classified as an expert,x have this qualification just pay off the forum for a subscription and become an expert on the contrary expert.
I know very well I just wanted to see who wrote him, in fact he immediately diverted the thing after you have made a mistake writing the nick of the user in question,however, it does not matter.
to answer giarras and msport, fidodido you ? true is on another forum, he had made me a dobl? a p? of time f? and l? we have always felt and I have always recommended, and then ovvimante I can't stress how can I not fill the post of this forum and then you love to inform you of this? and in a way that I'm not going to break the p****and to all .....
to answer giarras and msport, fidodido you ? true is on another forum, he had made me a dobl? a p? of time f? and l? we have always felt and I have always recommended, and then ovvimante I can't stress how can I not fill the post of this forum and then you love to inform you of this? and in a way that I'm not going to break the p****and to all .....
sorry iaio92 my was not a reproach each person can do what it thinks is best, I just wanted to point out the fact that you said the words "excuse me ? a friend of mine who has helped me for the little that he knew...." this is not it sounded good..the whole qu?! I, too, if you f? pleasure I do the same but not + in the Italian forums, given that all of them have been banned..but believe me I'm not lost anything, I am proud dess'ere qu? anyway, I wanted to point out that in this forum no one breaks the p.... then if you need it, in our possibility?, we'll be there.
also happened to me and ,once that mpps v5 told me the same thing with bravo 1.6 120 hp,but I had read with croma, which was the same type of thing
and I rewrote the ori,and right after that I tried again to write what I was mod, and the outlet quietly ......
regardless of the writing of the file.. after seeing that map.. I don't think I have seen a good job.. at some point in increments of 2 to 3 % .. injection for a maximum of 12 %..
but it should be this car ? bbboooo
you have done well to focus on this fact, I did not want to go specifically for a questino of respect of the forum, I unfortunately other languages do not know well-all the more so if you v? to talk about technical things.....
regardless of the writing of the file.. after seeing that map.. I don't think I have seen a good job.. at some point in increments of 2 to 3 % .. injection for a maximum of 12 %..
but it should be this car ? bbboooo
icrementi 2.3% why? it was a test, I want to see how he behaved in the car , if he smoked, if jostled or gave empty....... it is proven and does not smoke, v? smooth and as a first impression has gained a little bit...... then of course ? the first bosch that I do, so far I've only tried it on marelli also thanks to the help of GARRET......
icrementi 2.3% why? it was a test, I want to see how he behaved in the car , if he smoked, if jostled or gave empty....... it is proven and does not smoke, v? smooth and as a first impression has gained a little bit...... then of course ? the first bosch that I do, so far I've only tried it on marelli also thanks to the help of GARRET......
haa understand... ok
haa understand... ok
why? do you say that ? done evil in your own way to remap??
msport (exil77grande)
18-10-2012, 14:32
why? do you say that ? done evil in your own way to remap??
I audisp the policy I do not see it of the best, even if it is only a test.
I would not go out of topic, just a quick question, how avrestre x if you increased the rail, times iniez. and their limiters?
I can't help you sn the cool of the forum, and then I can't download the file ,anyway, ste machines to be pretty good with a little ,anyway, rail injection you have to behave in the normal way...greetings
it is, in fact, I don't think I have exaggerated or going out of bounds...
I repeat iaio92 I was not able to see your map, why can't I download but as you said you have to make a clean thing, and already you'll notice quite,,,,,
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.