View The Full Version : Copy file auto
Hi to all guys I wanted to ask you one thing, having two cars the same in question una147 1.9, 120 hp, you can take his map, edit, and download it on another? I read somewhere on the forum that it was necessary to first read the original of another car and then do a procedure..c, and someone that I can explain?thanks to all and buonaserata
read the original first of all, what is essential, then we must see if as sw are equal and in that case, you may write it on this car (other no), otherwise you must copy the changes on the original file that you read.
read the original first of all, what is essential, then we must see if as sw are equal and in that case, you may write it on this car (other no), otherwise you must copy the changes on the original file that you read.
Exactly bruno copy the parameters but you can do it directly or manually for each map ? Good morning to all
checks to see if the numbers sw and hw are the same otherwise, if you have ecm you copy the file increments and post them in the appropriate file ...
it is easy you can do it in half a second
Hello carfree and if the sun hw is equal to the sw no? I read the original map and then with the ecm how do you copy the increments?
Then you have to do is go to a remapper ..
ah yes sorry I was wrong I should not write to the ecm to open the files first then ..
in the top left, see file, click it, and find summary increments .. and then do the whole
the comment you have to do is go to a remapper I didn't have to write and tell you sorry ..
ah yes sorry I was wrong I should not write to the ecm to open the files first then ..
in the top left, see file, click it, and find summary increments .. and then do the whole
And very intuitive?
two minutes and I'll write how to do it
open ecm insert the original file and the mod file even if you do not have the same numbers .. right once you put the mod files will see that in the squares of the maps you see of the v that would mean the maps made by the mod file that you entered once you have confirmed the ioc always you have to be in the main screen at the top go to the file summary increments, save, and save virtually the maps of the mod files ... then open with ecm only file ori always go to file increases in browse search the file increases that you saved do apply then ok then again on the file do save eprom changed and the game is done ..
I hope I have been clear ....
the comment you have to do is go to a remapper I didn't have to write and tell you sorry ..
I figured you could tell me who are in the very early weapons 😂
try to do as I have said ..
try to do as I have said ..
I will try as soon as possible to you keep up to date carfree thanks a lot
ok do know ..
please
For the moment, thank you
I also hope at a later time :) anyway, the procedure is this quiet, ... good day.
I also hope at a later time :) anyway, the procedure is this quiet, ... good day.
Hello carfree in information could you tell me where to take ecm2001 titanium?
hello check your **** I have written suggestions where to purchase this program
more of this .. I don't know what to tell you ..
hello carfree sorry if I'm intruding ,I make this procedure that you have explained to copy the increments, and then apply them on the file ori I did
and everything went for the best , but then when I went to write the modified file: to write all ok but the car does not start.
what have I done wrong ?
thanks
sure, it was a different map, and then you'll have COPIED the things that there came nothing..
put the original map if you have not locked the ECU and it should start.
you must be careful when you do certain coswe you do not mess mica with write files.
hello surely the maps are not the same and you will not part the car, remember to copy the increments on a map must necessarily be coming from a other map of the same car the same cubic capacity horsepower model of the control unit .... ok ? return its file with its maps, you will see that again ..
let us know ... if you solve the mystery of ...
in fact, we hope not to have locked the ecu, but then what camera is ? specific of the most in any case do the test with the file ori .
what you have written you'll I said..
if you have locked the ecu can start to disassemble the unit And get files in the bdm..
what you have written you'll I said..
if you have locked the ecu can start to disassemble the unit And get files in the bdm..
I don't think labbia locked bu speriao no
hello carfree sorry if I'm intruding ,I make this procedure that you have explained to copy the increments, and then apply them on the file ori I did
and everything went for the best , but then when I went to write the modified file: to write all ok but the car does not start.
what have I done wrong ?
thanks
On which ECU have you done this procedure? that Software edit you used? give us some more info..
maybe is not correct the checksum on a edc15.. Booo
Buh of course if nn specify well one does not know how to help them rightly obvious
exactly does not provide the necessary data, you do not understand a tube.
hello sorry if I take long to respond , then the car is fiat brava 1.9 jtd 105 hw 0281001928 sw 1037352212 edc15c5 *****q I solved it by putting the file ori ,
but I want to say the file that I copied is on the same identical car that has the same hw 0281001928 only changes the number of the sw which ends up with 159 ,and then with the ecm I have done
summary increments, I saved ,then I opened the file ori and I took the file increments and put in the file ori I saved it and finished then I'm going to write with galletto v54 and all is ok ,
but then the car does not start ,this is what I did
and the machine that you copied the increments as well as same HP? mha seems strange to me you see that there are two different maps try to see the values and the lines if they are the same
hello sorry if I take long to respond , then the car is fiat brava 1.9 jtd 105 hw 0281001928 sw 1037352212 edc15c5 *****q I solved it by putting the file ori ,
but I want to say the file that I copied is on the same identical car that has the same hw 0281001928 only changes the number of the sw which ends up with 159 ,and then with the ecm I have done
summary increments, I saved ,then I opened the file ori and I took the file increments and put in the file ori I saved it and finished then I'm going to write with galletto v54 and all is ok ,
but then the car does not start ,this is what I did
I'm not sure but I think that if is not equal to sw this operation does not go well, then have you checked the cks if it is correct, if the file you copy I increases, it is not a problem.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.