The control unit 595 Abarth euro 6

[Polabarth]

Hello I wanted to know if a 595 Abarth 140 HP gearbox mta, you can insert the original file version (160 HP) I state that ****llo mechanical are identical for both turbine ihi is only a matter of the map, in fact, the Abarth only has to do the update of the ecu which is a bosch me17.3.0 if I'm not mistaken. Thanks

[Polabarth]

Who can help me

[manu90]

code hw is?

[Polabarth]

I do not know, in fact, I wanted to know the feasibility of what's on the Abarth do the reprogramming so I think that the thing is feasible

[tecnoecu]

if you have the hw equal a test you can do

[Polabarth]

I can give you the hw of my

[Polabarth]

[carfree]

then, if they are the same identical engines that does not change anything, I believe that you can do ...
I have the ports in the fiat, and you do an upgrade... or get a file of 160 hp if the numbers sw hw does not match to copy only the maps in your file and you're affixed, you need to have programs and equipment to be able to do that, of course .. but it is something feasible

[Polabarth]

the engines are the same in the abarth don't make you update unless you buy the complete kit, should I find someone that I copy the file to the engines are the same

[carfree]

then I think of myself as a thing feasible if the engines are the same then do a nice thing in this forum I don't know if you know there is a service file ... the prompt and you're affixed, of course, as you know, you read your files of your drive the can attach it and ask for the type of work to perform, it seems to me the only solution that exists in this forum .. except that I repeat it to you do-it-yourself should have a file of 160 hp save you maps and copy in your file .. I always believe that it is feasible to so but it is not very secure

[carfree]

otherwise go to a remapper if you're not equipped to even read your file ..

[carfree]

I confirm that you can do that numbers sw and hw did you do not know it not true ?

[Polabarth]

thanks for the advice the only problem is I have no equipment and my eco bosch me 17.3.0 should be opened for read and write I think we can not do in the obd

[carfree]

go to a remapper and explain everything ...
you must open it...

[Polabarth]

then the mapper would do copy pasting?

[carfree]

if you require this and he manages to do it do you copy the maps of the 160 hp on your file of course you should find a file of the abart upgraded to 160 hp .. go clear by a remapper good .. otherwise if it fails you read the file your sending it in the service file of this forum, and you do change them, then give it to him and you do write!!!
in case he should not succeed
( but I guess that makes you quietly) .
have a good day !