scodifica

[max75]

hi there ...I have a problem with a fiat marea year 99....jtd105....the control unit bosch edc15. .sometimes not necessary to try more than once ...what is the procedure for scodificare.....thanks

[msport (exil77grande)]

it will be €2 and then next to process the flash with the appropriate sw you have to put an emulator.

[magi1984]

start posting the number, HW ecu cos? I see if I have already? the file scodificato

[tezzero]

According to me ? the antenna....you first replace it..let us know..

[audi sp]

checks to see if the ecu 5 pins..and if so.. public the number hw and software of the ecu..
let's see if I have something I also tested

[lumaracing]

checks to see if the ecu 5 pins..and if so.. public the number hw and software of the ecu..
let's see if I have something I also tested
audi sp,even if it has 5 pins,disogna do 2ep virgin and install an emulator to make it total

[max75]

thanks to all..... the customer should take the car Thursday afternoon....as soon as possible I'll keep you up to date..

[max75]

problem solved.....I replaced the antenna ...? the problem for now, don't you ? the most re.....thanks.

[carbo92]

Guys but to make the scodifica total from the serial port, just connect the MPPS or the Rooster v2 to the OBD as if it were a simple writing? Or you have to follow a precise pattern? I have to say that the ecu that I have to scodificare doesn't have his own key so I should scodificarla in serial bypassing before the immo and then write the file scodificato.
Thanks to all

[sno74]

but what ecu are we talking about if you have to do a job, you should open a new post and complete data ecu.........

[carbo92]

but what ecu are we talking about if you have to do a job, you should open a new post and complete data ecu.........

I had opened a post but the admin closed it immediately, saying that the discussion ? was this several times and then I asked your help... it is a EDC15c7

[sno74]

write in the box the search EDC15c7 and start the scan you will find all the instructions you need and well detailed.....

[carbo92]

write in the box the search EDC15c7 and start the scan you will find all the instructions you need and well detailed.....
I just did the search as I have indicated, but I have not found anything that suits my case or better.. someone that says that if I don't have the original key, the only way to read and write ? unsolder the 95P08 and then make it to the tour via gallo v2.. but no one has confirmed the operation.

[sno74]

see this discussion here c'? all.......
https://www.professionalchiptuning.net/showthread.php?3652-Scodifica-totale-Punto-Jtd-99-80-cv&highlight=edc15c7

[carbo92]

see this discussion here c'? all.......
https://www.professionalchiptuning.net/showthread.php?3652-Scodifica-totale-Punto-Jtd-99-80-cv&highlight=edc15c7

Yes, I read and stra read.. but does not say how to put it in the boot :(

[sno74]

the first bounder of legend.....it should be edc15c7 you can intervene from the flasks with reading and srittura by obd with the appropriate tools

[carbo92]

the first bounder of legend.....it should be edc15c7 you can intervene from the flasks with reading and srittura by obd with the appropriate tools
The ECU does not let me go even in diagnonsi with texa why? does not read more? the key.. for what I have to scodificarla

[aldinik]

According to me ? the antenna....you first replace it..let us know..

Excuse, I have noticed that the dear max75 solved by following your advice and the cio? replacing the antenna, could you kindly explain to me what c'?ntra the antenna of the car, with the scodifica of the ecu??

[carbo92]

Excuse, I have noticed that the dear max75 solved by following your advice and the cio? replacing the antenna, could you kindly explain to me what c'?ntra the antenna of the car, with the scodifica of the ecu??

1) I'm not sure that it is the antenna because? it stays on the code and the machine will not 2) Even if the antenna is disconnected and scodificando totally the ECU should start the same right?

[aldinik]

1) I'm not sure that it is the antenna because? it stays on the code and the machine will not 2) Even if the antenna is disconnected and scodificando totally the ECU should start the same right?

Hello..sorry but I was not referring to your ecu.
See post #7 and #8, where max75 solved by replacing the antenna, I would like to understand the why?...what does the antenna??

[carbo92]

Hello..sorry but I was not referring to your ecu.
See post #7 and #8, where max75 solved by replacing the antenna, I would like to understand the why?...what does the antenna??

Ah ok sorry :)

[sno74]

have you checked pin power and ground on the ecu you are ok..... if the code is not to be the diagnosis should enter otherwise you have to do a tour with connection diagram....

[carbo92]

have you checked pin power and ground on the ecu you are ok..... if the code is not to be the diagnosis should enter otherwise you have to do a tour with connection diagram....
I repeat that I have read and written to the ECU on the bench... now I try with a file found here on the forum, tested and guaranteed to still ? the file that I tried that does not ? good