pippo65

Hello guys,I made scodifica total on fasch and partial on the eeprom,the machine goes without problems but I get engine failure.
I checked with diagnosis, and gives me this error: P601 Ecu faulty(Eeprom)
What can it be?
Thanks.

cinqueturbo

You have confused the ECU like you on the other hand...

What you need to get a Total or a Partial on this ECU???

if you need a Partial Work on the E2Prom to Stop..

if you need a Total Work on the Flash Stop..

pippo65

You have confused the ECU like you on the other hand...

What you need to get a Total or a Partial on this ECU???

if you need a Partial Work on the E2Prom to Stop..

if you need a Total Work on the Flash Stop..

Hello cinqueturbo,I've definitely made a bit of confusion,but can you explain to me when you have a total or a partial with this type of ecu?
And which software is best to use?
Thanks.

cinqueturbo

This ECU uses it only on this car? Partial
This ECU you use it on different cars when it happens? Total

The Software will count as the stars in the sky..
Which will you have available?

carlo abarth

or are you on a or you on other that or work on flash or on e2p!!!

pippo65

This ECU uses it only on this car? Partial
This ECU you use it on different cars when it happens? Total

The Software will count as the stars in the sky..
Which will you have available?

You use it only on my car,and then partial.
As software I Meucci,Time and immodec 3.2. I'm fine with Meucci because it calculates also the chek,can you go?
Then the error that I find in the diagnosis, the more light the engine turned on, it may be because I made the scodifica is to flash the eeprom?

pippo65

or are you on a or you on other that or work on flash or on e2p!!!

I understand,thanks for the advice.
Hello.

pippo65

If you have to use only on your car remove the total on the flash, and make only the part of the eeprom.
That error will appears if you edit something by hand, in the eeprom, or because the file the virgin who gave you the program is not 100% with the sw version of your ecu, the diagnosis drop him a line the codes of the injectors, do a reset parameters autoadattativi, and give us a few km, you'll see that the error disappears.

If you do not were to disappear, I'll explain how to remove it completely from the ecu.

Great Matthew!!
can you tell me if with Elm 327 more multiecuscan can't encode the injectors?

pippo65

You should do this, but 100% not I can guarantee you that, once I tried on a doblò and was not going to end well, I'll write them directly with the examiner.

Yesterday evening I watched on Ecuscan 2.2,but I have not found the Encoding entry in the injectors,can you tell me where to find it?

pippo65

Select your drive, then select the control engine and Marelli 6f3, once connected, go into adjustments and find the items classification the injectors, leggiteli before your ecu ori and segnateli and then enter them in the virgin.

Hello Matthew,as soon as I can I try and let you know.
Thanks.

pippo65

Hello Matthew,as soon as I can I try and let you know.
Thanks.

Now I feel a bit on the road, and see.
Among other things, a friend of mine passed me this modified file to try,but before uploading it I ask to you,or to someone competent if you please can give us an eye,you know I would never make a mess,then if it is passable I would take it as a cue to start working on it.

cinqueturbo

I gave a quick eye fast clear..
Lacking a torque limiter 084BE6..
I would have given more diesel fuel and less turbo pressure Rail pressure etc modando advances..
the request of the pedal is not adjusted to the increase in the data to the limiters..
You can upload it damages it you should do.. a Log of Parameters and recommended anyway..

pippo65

I gave a quick eye fast clear..
Lacking a torque limiter 084BE6..
I would have given more diesel fuel and less turbo pressure Rail pressure etc modando advances..
the request of the pedal is not adjusted to the increase in the data to the limiters..
You can upload it damages it you should do.. a Log of Parameters and recommended anyway..

having no experience on how to edit a map,could you tell me how to start?

pippo65

Haa,I forgot, what is a log of the parameters?

Errecinque

Haa,I forgot, what is a log of the parameters?

Put a nice pc on the passenger seat or on the legs of your girl connected to a diagnosis tool, and start to give in. The objective is to record the parameters of the turbo maf rail diesel fuel etc with the machine in motion

pippo65

Put a nice pc on the passenger seat or on the legs of your girl connected to a diagnosis tool, and start to give in. The objective is to record the parameters of the turbo maf rail diesel fuel etc with the machine in motion

Then the pc I have,the girl no,but I have the wife:), but that it is better to leave it at home :) as the diagnosis I have elm 327,can go well?

Andrea1

you can do it alone even if it makes it better. If you're alone, I advise you to take the log not very long

pippo65

you can do it alone even if it makes it better. If you're alone, I advise you to take the log not very long

Hello Andrea,where should I go to the Chart and then Start?
Then, still in the Graph there is a set something?
Thanks.