Map Alfa 147 JTDm 1.9 16v 150 hp (Altomare)

[Cristian147]

After a document is read on line courses basic to begin to understand something,here, happily, I open the original map with the titanium and I find a map never seen until now.

MOTOR TORQUE:
The required torque duranete the standard terms and conditions
Limiter maximum torque
Maximum torque of the first gear
Maximum torque of the second gear
Maximum torque third gear
Maximum torque quata gear
Maximum torque of the fifth gear
Maximum torque of the sixth gear
Maximum torque in reverse
torque during start-up f(RPM,ECT)
The required torque during the acceleration
The required torque to the functionality sports
The required torque to the functionality sports B

AIR CONTROL:
Amount of gas reintroduced
Percentage valve opening

INJECTION SYSTEM:
Limiter, smoke - threshold lambda top
Limiter, smoke - threshold lambda lower
Fuel amount injected as a f(RPM,Trq)
Injection time
Phase - injection main injection map base 1
Phase - injection main injection map base 2
Phase - injection main injection map base 3
Phase - injection main injection map base 4
Phase - injection main injection map base 5

TURBO:
Control of variable geometry (VGT)
Turbo pressure
Limiter turbo pressure f(APS)
Limiter pressure turbo

RAIL:
Rail Pressure
Limiter Rail pressure f(RPM, T_FUEL)
Limiter Rail pressure f(RPM, Q_FUEL)

LIMITERS:
Speed limiter

All that I ask if it is possible...it is an advice on what to touch and more or less than you? I say immediately that I am not a trainer and still do another job, and this mapping I would like to do it on my 147 and I ask for 400/500 euros I would prefer to do it alone the mapping.
So if someone can give me some advice I would be a great pleasure...otherwise, thanks all the same!
PS:If you don't want to tell me what percentage or how to intervene....at least what tocchereste you

[claudiooreste]

Hi Cristian , there is much to touch but it should be done with the policy, and is not only a speech of a percent. If you have already studied something you should start to edit the map and post the ori and the mod will be able to advise.

[Errecinque]

This ecu is one of the few that ecm has a driver that is fairly complete and understandable, all in all, bosch edc16c8 and c39 are the ideal place to start playing...and you're on the forum material in abundance. parts without the dash you with out driver for now and start with some map soft to learn to feel with the foot the differences of the changes. You will need to do several step, but is the machine seems to be born to receive mappings. (I have)

[ugoboss]

begins to modify the pedal, lim. torque, fuel injection, and turbo, if you have done the course and you'll have explained something.

[Cristian147]

Ok guys you are very kind and convincing. Beginning with some editing soft and then place them as I change the original and the mod so we'll see if my tweaks are good or not!

[Cristian147]

Well I am attaching the original file and the mod so let's see if I did well or not!

[Cristian147]

I wanted to also look at some other maps here on the forum, but not to me download. It says it is not enabled :-(

[ugoboss]

because the pedal you have changed in a negative?, the map egr return it as original as that of the oberboost, the restrictor of the turbo so it's not okay, how to forgive ori maps rail because they do not go well.

[Errecinque]

I agree with Ugo to reconsider.....the only passable one is the torque limiter as increases, the injection time them you will experience when you make a map calculated for more than 80 mm3/cyc. Until then do not touch it and forgive ori what you have said above.

[Cristian147]

I just changed the map back to see if it's better!

[Cristian147]

[Cristian147]

The last map made after various calculations on my knowledge which of course is short this is!