Carsotware fap/dpf works? [Archive] - ProfessionalChipTuning

admin

14-10-2012, 16:25

As the title let's see if this software works for those who have tested and asked to make a list of all the cars that can do it without problems

Brand
Model
Displacement
HP

Refrain from answering all those hearsay

magi1984

14-10-2012, 17:10

msport (exil77grande)

14-10-2012, 17:48

when I understood about gp 1.3 mj of being able to do text to the sw and then:

Fiat 500mj 1.3 OK
fiat gpunto 1.3 mjet 90hp all ok

cattivik

14-10-2012, 19:47

500 mjet ok
gp 90hp ok
dobl? mjet 85 ok

giarras

14-10-2012, 20:43

I would add:
500 1.3 mj ok
Gp 90 hp ok
Doblo' mjet 85cv ok
musa 1.3 90 bhp everything is ok

tezzero

15-10-2012, 00:09

500 1.3 mj ok
Gp 90 hp ok
Doblo' mjet 85cv ok
musa 1.3 90 bhp everything is ok
Bmw x3 110 kw fap ok

Team electronics

16-11-2012, 11:43

for me better to have them manually.

I tried out a few times even with the cars reported by you but no result

magi1984

16-11-2012, 12:15

let's say that once discovered how to make hand-it just takes a moment and then agrees to do them all by hand for safety

abberello

17-11-2012, 10:35

Usually it works... ? the method of ir? intuitive!

Gianpy80

17-11-2012, 10:46

I have tried it on Audi A3 2.0 TDI but it always says that the file ? wrong. Actually he says it should be 1 mb and instead ? 2mb..

magi1984

17-11-2012, 13:20

this sw ? only for fiat and opel!

msport (exil77grande)

17-11-2012, 14:54

I know that it is confused with the carsoft normal.

Gianpy80

19-11-2012, 15:11

no the one I have is called just carsoftware, and there are a p? all brands of car..
? this:
http://img593.imageshack.us/img593/8760/1353thickbox.jpg

msport (exil77grande)

19-11-2012, 15:12

I know that it is confused with the carsoft normal.

I confirm this does not serve to exclude the fap/dpf that is called carsoft fap/dpf and is only fiat and opel 1.3 mjet.

Gianpy80

19-11-2012, 15:19

no I know the difference between carsoft and carsoftware.. I also posted the screenshot.. I had to exclude the EGR on an audi A3 2.0 TDI.. and with the 5.2 you should be able to do why? ? in the list, but he tells me that the file should be 1 mb and instead ? 2mb then not process it even..

Gianpy80

19-11-2012, 15:21

mmmh I know what exactly is your problem do you have with Admin why? the title of the topic ? wrong :)

abberello

19-11-2012, 15:58

with what you have downloaded the map?

V.V.

19-11-2012, 16:33

Even if the work I have done I can say with certainty that on the 330D ex 231Cv BOSCH EDC 16C31 it works! The map downloaded with MPPS!

msport (exil77grande)

19-11-2012, 21:54

mmmh I know what exactly is your problem do you have with Admin why? the title of the topic ? wrong :)

the title is correct you that you have written in the wrong place because here you spoke of carsoftware fap/dpf instead, you speak of the carsoftware 5.2 that serves to eliminate the egr-fap and immo and in fact does not work on edc16u31-u34, which is 2m but only on edc16 u, which is 1m,closed off the topic, thanks.

Gianpy80

20-11-2012, 07:53

ah ok sorry...

Ross

20-11-2012, 21:41

on the fiat 500, everything is ok, it is not deleted why? with the diagnosis the fap is still present, but the car still will not regenerate. about opel meriva he didn't even have the car after the file is loaded
Fiat 500mj 1.3 OK

I want to correct a wrong belief: the fact that the construction of the car remains with DPF, does not mean that the elimination of the electronic system is incomplete.

msport (exil77grande)

20-11-2012, 21:55

I want to correct a wrong belief: the fact that the construction of the car remains with DPF, does not mean that the elimination of the electronic system is incomplete.

I agree with you in fact ******* it is in this way, the elimination of the dpf,however, do it manually and not have nothing not even in the diagnosis is more beautiful to see.

Ross

20-11-2012, 22:12

Definitely! For the dpf off I prefer to do everything by hand, I do not trust the various sw, too many times, they act where they don't have ;)

nuovaecu

08-01-2013, 21:26

I tried it works great ever since disappointments

bicio

08-01-2013, 21:35

on the opel does not work as well as the scodifica.5.2

sno74

08-01-2013, 23:47

I would add:
500 1.3 mj ok
Gp 90 hp ok
Doblo' mjet 85cv ok
musa 1.3 90 bhp everything is ok
one of my curiosities? with what you have to read the file in bdm or mpps I maybe I have to make a opel combo has anyone ever tried it on this car......

sno74

10-01-2013, 00:07

sorry no one has ever degfappato combo I was interested to know if anyone has fatyo evidence on this car.....Clearly with carsoft or advise me.....

nuovaecu

10-01-2013, 08:04

sw of meussi should be good to go

sno74

10-01-2013, 19:11

sw of meussi should be good to go

inside on the list of cars you also have opel combo, or the race, maybe ? the same thing....

cawadany

14-02-2013, 10:06

Perhaps I should soon do a dpf delete on the Fiat 500 mjet. Do you have news? on Carsoft? The fa correctly? I ask why? I have read somewhere that only 30% of the changes that should be made to do a complete job.....

magi1984

14-02-2013, 10:25

honestly, I do all by hand and I never had any problems.
you could also try with the time, c'? who says that is good

cawadany

14-02-2013, 10:35

honestly, I do all by hand and I never had any problems.
you could also try with the time, c'? who says that is good

Ok, thanks a lot.
The fact ? I'd like to try my hand in doing it by hand, at least I learn.... but of guides around there are......

magi1984

14-02-2013, 11:27

guides do not exist
I have done so?:
for the first time I bought a file dpf off working 100% from another trainer, and I used to
the second time I have studied the changes made to the file bought, and I plotted it in the car that I had to do
ditto the third time, the fourth etc etc

and now I do that without problems.

it's about making an investment on the first file in to buy, but then you will be sure that you do all

cawadany

14-02-2013, 11:34

S?, at the end I think that I affider? the online service of the forum. Thanks.

Team electronics

16-02-2013, 13:53

reported in the self that had to do with different addresses explain it!!!!

msport (exil77grande)

16-02-2013, 15:08

reported in the self that had to do with different addresses explain it!!!!

what do you want explained?
the thing is the simple fact copy and paste the work done on the file bought on the files where they were supposed to do the job,+ or -, the curves are the same just to identify the areas.

Team electronics

17-02-2013, 04:54

I am nothing, but it certainly addresses change!!!!

carmat70

11-03-2013, 17:28

Did the Lancia Musa 1.3 mjet 90 hp without problems.

cawadany

11-03-2013, 17:33

Did the Lancia Musa 1.3 mjet 90 hp without problems.

How many km has the path of the vehicle after the mod?

carmat70

11-03-2013, 20:08

How many km has the path of the vehicle after the mod?
I don't know, for? done a month ago and the customer have not heard,
if he had problems, you would be made to feel (sgratt, sgratt).

cawadany

11-03-2013, 20:24

I don't know, for? done a month ago and the customer have not heard,
if he had problems, you would be made to feel (sgratt, sgratt).

Then I would say that this software is that luca stanca without problems. You are likely to give false information.

carmat70

11-03-2013, 20:50

cawadany

11-03-2013, 21:20

After a month, I can reasonably say that it works, you have had problems with this sw is applied to a lancia musa 1.3 mjet? It seems to me that others have defappato the 1.3 mjet with this software without any problems.

Depends on how many km it has done in a month... According to me a "test" of this kind is not ? a proof that the mod is successful perfectly.

carmat70

12-03-2013, 12:30

I called the customer care, asking how he was getting on the car.
For now everything is ok, km travelled by the change 500/600.

cawadany

12-03-2013, 13:17

That's why? I said that is not ? a valid proof. Too few miles.

Team electronics

12-03-2013, 14:34

But maybe who knows? it could also work the luca stanca

cawadany

12-03-2013, 14:43

Maybe s?, or maybe not. It is a fact that after 500 km, you can't come to say that the change works 100 %.

carmat70

13-03-2013, 10:56

Maybe s?, or maybe not. It is a fact that after 500 km, you can't come to say that the change works 100 %.
You may have a problem for case, if you read the thread from the beginning, I'm not the only one who claims to have made a musa 1.3 mjet 90 hp without problems, but they are the only one to whom you're saying that I can't be sure of the change.
You know something that I don't know? Type others claim to have used this sw but really?, are you sure you have also done the manual changes? If it's so? it was, this would be very unfair.
I just reported my experience, 600 km are not succifienti? The next time before reporting an experience aspetter? it's been at least a year, cos? the avr? the certainty!
Sorry, was not to argue.

cawadany

13-03-2013, 11:17

You may have a problem for case, if you read the thread from the beginning, I'm not the only one who claims to have made a musa 1.3 mjet 90 hp without problems, but they are the only one to whom you're saying that I can't be sure of the change.
You know something that I don't know? Type others claim to have used this sw but really?, are you sure you have also done the manual changes? If it's so? it was, this would be very unfair.
I just reported my experience, 600 km are not succifienti? The next time before reporting an experience aspetter? it's been at least a year, cos? the avr? the certainty!
Sorry, was not to argue.

600 km are too few, I have heard of cases in which regenerates every 1000 km, depends on the type of use.

carmat70

13-03-2013, 11:29

The car ? used mostly in the city?, and ? this is the reason why he wanted to delete the dpf, every three to two was to change the oil.

cawadany

13-03-2013, 11:47

The car ? used mostly in the city?, and ? this is the reason why he wanted to delete the dpf, every three to two was to change the oil.

If ? often used in the city? pu? be that continues to "defer" the regeneration, and then the interval of regeneration increases.

msport (exil77grande)

13-03-2013, 15:26

we want to 1000km to be sure.

cawadany

13-03-2013, 16:21

I did do the mod from the online service of the forum, and I think it was made with *******h. For the little that I understand I, by comparing the file by *******h and by Carsoft, you can notice the differences.

msport (exil77grande)

13-03-2013, 19:16

SandroMarciano

28-03-2013, 23:15

cos? so much to do today I had a guinea pig, I tried to process a file with this sw on a grande punto 90hp, I have loaded, without the need to remove the dpf, of course, but from what you capiesce that it has worked? the percentage of clogging in the filter increases, the rest it seems that everything is working... so I would say that he has not done anything...

Team electronics

29-03-2013, 07:37

As it turned again to demonstrate this Sw nn does nothing!!!!

SandroMarciano

29-03-2013, 08:02

the strange thing ? many users on the first few pages had that worked properly...

Team electronics

29-03-2013, 15:59

Maybe on some machines it works fine, but I sincerely nn believe while nn having never used!!!!

msport (exil77grande)

29-03-2013, 21:55

if the % of clogging increases is not working.

SandroMarciano

30-03-2013, 10:27

if the % of clogging increases is not working.

I imagined!

cawadany

30-03-2013, 10:32

If you want you can try with Time.
I too had your "problem" and not to take the risk, I turned to the service files on-line forum.

SandroMarciano

30-03-2013, 14:28

If you want you can try with Time.
I too had your "problem" and not to take the risk, I turned to the service files on-line forum.

Thanks for the reply, but to do the copy - and-paste, I can do that too, I was looking for a way to process them all quickly!

SandroMarciano

03-04-2013, 21:38

in the first few pages in many write that they have defappato correctly on some cars with this sw, could you please post also the n?sw and hw?
Thanks

giuseppe1374

04-04-2013, 18:39

you can say that about a lot is not working you who marelli need to do?

SandroMarciano

04-04-2013, 18:50

the urgency no, I was using as a guinea pig grande punto 90hp that I have available for practice, but we have already? found that it does not go! I wanted to? understand what changes does that work, in order to isolate the really essential.

giuseppe1374

04-04-2013, 19:50

this depends on the hardware and software of the ecu, I can postari the data of this ecu gpunto that you have on hand

SandroMarciano

04-04-2013, 19:54

51806505
3443p591
mjd6f3hw03p

giuseppe1374

04-04-2013, 20:24

I tried it, and as a gi? I knew about this ecu software is not to be, however, my advice ? take a file luca stanca tested, and copy the mod on what you need to do, I at least do so and I am well, as you know, almost all the software that you have these problems, on some ecu work unobtrusively on the other they also create damage.

SandroMarciano

05-04-2013, 00:07

yes, I know that, but also by copying the values manually often you will make mistakes, some disable zones dtc, alter can messages etc etc, then I would have preferred to select the mods necessary and indispensable, however, there is a studier? in other ways, thanks all the same!

giuseppe1374

05-04-2013, 00:11

sandro, if you have a file of luca stanca well done and copy everything step by step you do not have problems, why? the marelli mj does not have all of these great differences.

SandroMarciano

05-04-2013, 08:16

I have a file luca stanca, but have never been used to modify the case by copying, gi? from the first maps, I was wondering why I had to take action in a particular way rather than in another... this d? the full control of the change, whether it be for the luca stanca is to increase power.

giuseppe1374

05-04-2013, 12:19

yes I agree with you but did not ? of course, with a software that you do what you say, if you want to do this then you need damos, and then I do not understand why? you say you edit a case, the curve on the mj are always the ones you can change the address but if you do the correct I don't see the problem, of course, having the damos understand what you do.

Dragonfly

08-04-2013, 18:14

for me better to have them manually.

I tried out a few times even with the cars reported by you but no result

If they are not rude, explain to us how to make a hand???
Thanks !! ( maybe I asked for too much !!!eheheheh)

gezame

09-04-2013, 01:03

Hello
To make by hand, to the need of a lot of experience, different ecu, different solution.

SandroMarciano

09-04-2013, 08:09

No experience with them at hand is based on a simple copy-and-paste: do you have a file made by another, apply the changes on your file and order...
If, instead, you have the famous, you can actually go to study how to make a luca stanca: in some units you can by acting on a control-only to say to the machine that has the FAP, on the other, you have to manually take out the regenerations, the degradation of the oil counters and whatnot.

giuseppe1374

09-04-2013, 12:36

sandro where ? can also option three, and that put a native software without fap...

gezame

09-04-2013, 12:43

Dragonfly

09-04-2013, 13:35

sandro where ? can also option three, and that put a native software without fap...
Would it be ??? enlighten us !!!

SandroMarciano

10-04-2013, 08:20

Hello+
You, of course, but it is not a fact file of another, how to do without experience?
I don't escribo each file in a car without knowing the logic de the changes, you do not know.
And then you wonder what is off the 2?bits with a value of 256 on Marelli 1.3 mjet 75 or 90hp you know exactly what it does in the real world??!

giuseppe1374

11-04-2013, 14:42

if it has the damos we can? learn a lot, and diagnosis, always at hand

zalinski65

05-08-2013, 19:59

Mah damn sti damos who has them and how you can have?

F. P. Racing

28-08-2013, 16:40

Can I ask where to find this program?? and the cost? Thanks in advance

sno74

28-08-2013, 22:28

in the network quietly but makes you only some fiat, and maybe opel mjtd for luca stanca good you can orient on the service, luca stanca the forum is done with sw *******h the best for now

msport (exil77grande)

29-08-2013, 11:26

in the network quietly but makes you only some fiat, and maybe opel mjtd for luca stanca good you can orient on the service, luca stanca the forum is done with sw *******h the best for now

Thanks of course we do not use only ******* but we also manually based on the experience gained in all these years of hard work and studies.

maxsek

29-08-2013, 19:25

[QUOTE=zalinski65;53548]Mah damn sti damos who has them and how you can have?[/QU

the damos you pay for...and who has them(and get paid) if you hold them tight....

ecusport

02-09-2013, 03:05

[QUOTE=zalinski65;53548]Mah damn sti damos who has them and how you can have?[/QU

the damos you pay for...and who has them(and get paid) if you hold them tight....

I would say to you...
to delete the dpf and to map it then as it should be for a bmw 535gt 2013 I bought and paid for 350 eur a damos:mad:
******* do not go on this edc17 and must be solved only manually, because the car is without faults on the display, but diagnosis takes the error difference and limits the performance even if not by much, for? of course you feel.

linus146

09-10-2013, 03:42

but we are speaking of the damos of winols?

ecuboost

24-01-2014, 21:29

I tried qst program on a spear 1.3 75hp nos worked, then the appropriate modifications ? gone, but in my case nn ? who has done something wrong pero has or met? work.

net_proo

07-02-2014, 23:26

hello,
does not work, but ? can edit the map drive with WinOLS, if you have the correct address of the dpf

msport (exil77grande)

03-03-2014, 17:04

[QUOTE=maxsek;55972]

I would say to you...
to delete the dpf and to map it then as it should be for a bmw 535gt 2013 I bought and paid for 350 eur a damos:mad:
******* do not go on this edc17 and must be solved only manually, because the car is without faults on the display, but diagnosis takes the error difference and limits the performance even if not by much, for? of course you feel.

we have done several bmw edc17 without problems,however here we are talking about carsoft.

eugene

22-06-2014, 21:29

gianpy80 have to cut the file... and bring it to 1mb

gianni1001

23-08-2014, 20:36

Forgive me if I make a little note
When you respond you could also use the quotation so as to not have to look for the answer to a question a few pages before?
:-) :-) :-) thanks