View The Full Version : Ktag 6.070 to fw 0 and the customer code blank
Hello all,
I hope someone come out from this trouble.
I have to say that the problem I was already successful, and I solved it by reflashing the SD 6.070, and redoing the update protocols.
But now I do not want to + know.
The ktag has done 3 cars, ever online.
all of a sudden close their computers 2.13 and when I open my grey and fw 0.
I also tried to change 2 times the SD.
Every time I put the SD card in the PC is corrupt.
If I take the SD card from another Ktag 6.070 to copy in the PC it corrupted the SD card.
Someone has sti benedetti file SD 6.070. Since online spin the legend that there are SD files fix for these errors and for the error eeeface.
Thanks
Once I gave the fw 6.070 but the client code and the subscription blank.
I put the CFG file L14xxxx in the folder C:\Ksuite\update and it is broken down.
The problem is this using the ktag with their computers where you use the kess, the update is not empty, in short..
but the update folder should be empty, you can not use it with the protocols of kess in attacking the ktag you incasina for strength..
This l' I got it, in fact, the problem originated from them.
Now as I come out of it?
If I take the SD card from another Ktag 6.070 to copy in the pc seems to be corrupted. then I can not copy.
the sd you put the new ????
I tried to buy a Sandisk Ultra 3 new 8Gb, put it on the file SD 6.070 and nothing.
When back on the PC is corrupted
I also tried to format the card slow to make it first to NTFS and then FAT32 to destroy and re-create the MBR but nothing.
Usually on their computers 2.08 German with the file update to 2.11 for the ktag part and exits immediately fw 0.
It's me doing the update protocols.
This l' I got it, in fact, the problem originated from them.
Now as I come out of it?
If I take the SD card from another Ktag 6.070 to copy in the pc seems to be corrupted. then I can not copy.
this does not happen, you mean that if you take a sd card to a ktag that works well, and the meti in your pc to copy it tells you that corrupted? at this point it seems a problem of your pc, try to use a clean pc.
I have tried on 3 different PCS, both with SD card reader built-in PC with SD card reader external.
In practice, if I put the SD card to a ktag 6.070 healthy functioning did 1 write, tells me to format the SD card. of course I did undo and put back in the ktag.
I think that you should ask the supplier where you bought it, any explanation you should give.......
Can never still at this point, are you? put the microsd in the pc and in the properties view that has a file system raw and can be duplicated, however, your problem is probably another component on the hw, the last test to do microsd the new package is not recycled max 4gb the to format in fat copy inside the folder of the old version, put the microsd in its place, take the update folder of the new version and replace inside your sw connects the tool and launch the sw and see if it solve so.....
I state that I had already done the test of putting the file on the SD card of the fw 5.001.
Since the same problem fw0 it happened to me once while upgraded a ktag from 5.001*6.070, on their computers 2.08 DE he immediately left without doing the update protocols, and with fw 0 customer code and the subscription blank.
And successful to at least 2 other people that I know of updating the Ktag, or using the Ktag on their computers which has turned the kess. At least we know for sure why it happens.
In practice, the I recovered, and then reconnected to the PC with their computers 2.15 and 2.22 of the kess is back to 0.
But it is time, not resumes +. Also tried to raise the tabs of the SD card.
In this step ;
"take the update folder of the new version and replace inside your sw connects the tool and launch the sw and see if it solve so..... "
You are planning to start their computers 2,08 DE with in the update to 2.11 of the ktag correct?
The mystery thickens.
I tried putting the SD card from KTAG working on this was a failed connection when starting their computers.
The driver Dataloader Alientech is present.
I tried to uninstall the driver and reinstall it.
To make a RAW image of the SD from the ktag healthy and put it on this, but nothing.
Rewritten the EPT but nothing
Remove put the driver, and are from **** FW 0 serial L0000000 and customer code subscription 0
With both the SD 6.070 that with the 5.001 update protocols are not part and rimance so.
Resolved in the way and stupid.
Brought the USB stick to the folder Ksuite2.08DE with Update from 2.11, ktag on a PC that is windows7 32bit, and voila update protocols party and ktag running again.
On SD card I put the SD files 6.070
I forgot to say, on a win7 PC WHERE I never installed anything of Alintech..
that's exactly what I told you to do it, use a clean pc.
Hello all excuse my inioranza, I, too, from a few days to a ktag cn but in the sd card, in practice, data are there? It is advisable to make a backup of the same, and putting a sd of increased quality that results can be achieved thanks in advance to all
update the token with kess v2.8
Sorry one thing the ktag updated the firmware 6.070 with that on their computers you can use?
I took a ktag with version 2.13, but I can't find my car bmw 3-series f30 as ever according to you?
And normal.
The KTAG the F-series bmw DIESEL does not do, just makes the gas.
And it only makes the 5-series F. The series 3 F it does not do...
But then with firmware 6.070 that version you can use.on their computers that does it all. ?
THE their computers 2.13. And that's it.
Any version Higher than 2.13 does NOT work on the KTAG. From the error need to Update Hardware
I have installed the 2. 10 and already on that c is the 3 series f30 as never before, then, if sibusavfino to 2.13?
Hi all, I have a 2.13 how to their computers and hw6.070 and I do not the series f( ktag cn)
you know the tap PROTOCOL edc17 bmw under tricore
Sorry Fabiuz I did not understand what I must press?
You say that the seri f of the serie3't do this, but that makes the f-series to the 5 series then you can read with the one saw that is always the same ecu.
I can't find in the help the links on this ecu you can have?
Sorry Fabiuz I found protocol I lost....
However, the 318d series f30 c is the family of 666 , so I think the face.
However, the connections of the ecu, you say that there are in the help or where I can find it?
Sorry Fabiuz I found protocol I lost....
However, the 318d series f30 c is the family of 666 , so I think the face.
However, the connections of the ecu, you say that there are in the help or where I can find it?
select a protocol, click next, and you should open the help in a auto with all the explanations including the links, if it doesn't mean that it's not there in your sw.
I don't have the car in hand, I the logic is correct, how does the Delta 2000 Jtdm with the protocol of the 1600's, having the same bosch EDC16C39.
So in the same way you make all the BMW F-series PETROL, with ME or MEV17.... are Series 1/3/5/7 or X series is correct.. Always a family 666 is.
I speak of 318 diesel 143 hp .
you have to if the pinot for this
dear colleague if the 318D of which you speak is a series F post-2013, not make it.
Has memory a Bosch EDC17CP50 the prerogative of only tool official as of now.
Perhaps I Terminal is the OBD as well
Sorry one thing the ktag updated the firmware 6.070 with that on their computers you can use?
I took a ktag with version 2.13, but I can't find my car bmw 3-series f30 as ever according to you?
If it is not in the list, not the fa! ;)
10933Trovato the way, here it is:
In tour c the.new firmware 7..... anyone found and tried, that also makes the bmw f-series
It IS also the 6.070 then you round the pinout GPT
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.