the best programmer to read and write the spansion

[alfetta80]

a greeting to all of you..
guys what is the best programmer to read and write the spansion??
specifically I need for a great point 1300 multijet 90 cv that fits the spansion regardless of whether you can not read, but only write what do you advise me??with the new galletto2 I can safely write??with mpps and bdm 100 I can not do anything..thanks..

[guidotacco]

mpps v5 and v12

[spark]

I have not yet eseperienza direct
but the pi? damage to the pi? stable v5
that also costs a little less

[msport (exil77grande)]

then if you need to read and write the expansion you have to attrezzarti of the k-tag of the alien or of the new gallo v2 ori,to write it in serial, but in the case of a block to be limited to just a mpps.

[giarras]

with mpps, after you have bought the file ori, remember to cut it to 1m, in the forum, you'll find a guide, you can just write it, otherwise, the said msport ? the bible.

[alfetta80]

thank you for the answers, mpps v5 does not have nothing to do with spansion at least in my experience that I had on the grande punto 90hp....I can't even make the identification........even with bdm 100 I can do the idi' so therefore you can't write, right?

[alfetta80]

mpps v5 and v12

mpps v5 but on the 12th I think the same thing!!

[alfetta80]

with mpps, after you have bought the file ori, remember to cut it to 1m, in the forum, you'll find a guide, you can just write it, otherwise, the said msport ? the bible.
with mpps v5 the 90cvnon you can't even write..with the 12 I think of you with spansion I don't know..

[dolphin]

I have written more? times with mpps 5 the point 90 hp. go quiet.

[alfetta80]

I have written more? times with mpps 5 the point 90 hp. go quiet.

ok but spansion no?I have had experience with a doblo' 1300 90hp but are not able to write!!!!

[msport (exil77grande)]

ok but spansion no?I have had experience with a doblo' 1300 90hp but are not able to write!!!!

watch for the doblo' 90hp mount the new marelli.

[carriuolotuning]

I suggest a rooster clone v2,very good tool,read in bdm in the whole standard?...

[munro]

guys cos'? a spansion??read full e2p???or maybe I'm embarrassed with the scan??

[alfetta80]

watch for the doblo' 90hp mount the new marelli.
for this I have failed to write it with v5??thanks..

[munro]

guys cos'? a spansion?? a type of flash eprom that only fits marelli??

[alfetta80]

I suggest a rooster clone v2,very good tool,read in bdm in the whole standard?...
thanks for the advice!!the studying for a long time, and to hear opinions and a good programmer..

[alfetta80]

guys cos'? a spansion?? a type of flash eprom that only fits marelli??
is exact,but I think that not only fits marelli!!!!

[munro]

received tanks!!

[alfetta80]

guys good morning to all!!!
in the meantime, thank you all for the resp dates!!!so to recap, my main interest in reading and writing a large point 1300 90hp spansion, if I purchase a gallo2clone I can read and write bdm??and write in the serial??thanks

[msport (exil77grande)]

guys good morning to all!!!
in the meantime, thank you all for the resp dates!!!so to recap, my main interest in reading and writing a large point 1300 90hp spansion, if I purchase a gallo2clone I can read and write bdm??and write in the serial??thanks

as far as I know this tool at the moment with the clone no because this is the old update without j-tag so in order to read the expansion, or rely to the equipment officer or aspects of the new rooster clone v2 with j-tag, which as far as I know soon you will be in the sale.

[alfetta80]

as far as I know this tool at the moment with the clone no because this is the old update without j-tag so in order to read the expansion, or rely to the equipment officer or aspects of the new rooster clone v2 with j-tag, which as far as I know soon you will be in the sale.
ok thanks msport availability.....

[michell]

excuse me cosasn the spasion did a lot of great point 1.3mtj 75 90 but does not fit the classic marelli.....

[msport (exil77grande)]

excuse me cosasn the spasion did a lot of great point 1.3mtj 75 90 but does not fit the classic marelli.....

you have to know that there are 1.3mjet that mountain of memories spansion what you can do with the equipment, the official, speaking bdm,instead, if we talk in serial mpps write it without problems.

[alfetta80]

you have to know that there are 1.3mjet that mountain of memories spansion what you can do with the equipment, the official, speaking bdm,instead, if we talk in serial mpps write it without problems.
hello msport!
as I understand it you say that with mppsv5 I can write on spansion??but I can't even do the idi as ever??in practice, even without idi I can try to write?? and how do I do however find the ori??thanks

[msport (exil77grande)]

hello msport!
as I understand it you say that with mppsv5 I can write on spansion??but I can't even do the idi as ever??in practice, even without idi I can try to write?? and how do I do however find the ori??thanks

do not confuse memory spansion with the new marelli mj8df,then you do not even talking about id of the mj8df and not on spansion.

[audi sp]

the spansion can only write with mpps.. but you have to cut the file.. as gi? said by colleagues

[alfetta80]

do not confuse memory spansion with the new marelli mj8df,then you do not even talking about id of the mj8df and not on spansion.
then I say a great point 1300 multijet 90cv memory spansion I can't even do the id!!you say that should do it??

[msport (exil77grande)]

then I say a great point 1300 multijet 90cv memory spansion I can't even do the id!!you say that should do it??

sure,you could read the information on the ecu?

[alfetta80]

sure,you could read the information on the ecu?
not now, tomorrow, but in the morning, insert them thanks!!

[alfetta80]

the spansion can only write with mpps.. but you have to cut the file.. as gi? said by colleagues
the nice thing is that it makes me not even the idi on this grande punto 90hp spansion...I don't know I'm confused ec who says that I must make others say no, or other esperiene this is the first time that happens to me a spansion and I don't know if mpps can do it or not..

[dolphin]

I apologize if my response, has led to confusion confirm in writing Grande punto 90 hp no spansion, the spansion at the moment, only official tools

[alfetta80]

[QUOTE=dolphin;10259]I apologize if my response, has led to confusion confirm in writing Grande punto 90 hp no spansion, the spansion at the moment, only official tools[/QUOTE
thanks dolphin does preocc...

[msport (exil77grande)]

I apologize if my response, has led to confusion confirm in writing Grande punto 90 hp no spansion, the spansion at the moment, only official tools

I repeat,the spansion you may write to the serial port with mpps.

[alfetta80]

I repeat,the spansion you may write to the serial port with mpps.
ok then is there some other problem anyway, in the morning you enter the data in the ecu and see!!it is not that you do with ilv12??I or a v5

[audi sp]

v12 ? better

[lumaracing]

also, I am better with the mpps v12

[sa80libero]

new wingnut writes without problems

[alfetta80]

new wingnut writes without problems
let's talk about the new gallo 2 clone or official?thanks!

[alfetta80]

also, I am better with the mpps v12
but the version v5 and upgraded to v12 or do I have to buy it back??thanks

[alfetta80]

sure,you could read the information on the ecu?

here is the information on the ecu!

FPT 51806505
NEVERTHELESS, 6F3 P5/HW03P/3443 - P570
G. section 1.3 SDE 90HP DPF

[giarras]

here is the information on the ecu!

FPT 51806505
NEVERTHELESS, 6F3 P5/HW03P/3443 - P570
G. section 1.3 SDE 90HP DPF

write with mpps that's okay.

[alfetta80]

write with mpps that's okay.
thanks giarras!with mppsv5, I don't do the idi this mounts a memory spansion!!at this point, I'd like to try a v12 and see if I can make the id...

[msport (exil77grande)]

here is the information on the ecu!

FPT 51806505
NEVERTHELESS, 6F3 P5/HW03P/3443 - P570
G. section 1.3 SDE 90HP DPF


I guarantee you that my online customers with mpps they did it without any problems,are you sure that your mpps has no problems?
have you tried to use it on other vehicles?

[msport (exil77grande)]

but the version v5 and upgraded to v12 or do I have to buy it back??thanks

the v5 you could bring it to the v12's just that you have to purchase the cip and then have a good dose of professionalism in the risaldarlo.

[alfetta80]

I guarantee you that my online customers with mpps they did it without any problems,are you sure that your mpps has no problems?
have you tried to use it on other vehicles?
you are the lady used enough group fiat alfa lancia group vag and worse', citroen, peugeot, etc, etc, and' more' than a year that I have never gave me any problems, mo on this ecu does not know what to say my knowledge stop here!!

[alfetta80]

the v5 you could bring it to the v12's just that you have to purchase the cip and then have a good dose of professionalism in the risaldarlo.

it's not a job that I can do it myself!!!
or I'd rather buy the v12, or another option that I can assist the v5 what is??I'm waiting for you I am blessed new galletto2 jtag clone with HW Italian, but who says that's okay who says no we do not understand anything.
I read that you are also working here at the forum aspect with th....thanks

[msport (exil77grande)]

at the moment there is the galletto v2 clone with jtag,it is true that there are 3 categories of these clones, namely:
working
semi-functioning
not working
we are trying to pull things together after some tests and then we will sell at a price not too high the same.

[magi1984]

apparently ? was made and ? working the ktag clone, I'm following with interest the discussion on a forum stranger.
it seems that even functions with the SW original 1.89 of the alientech, even if supplied in the cd-rom of the clone c'? the sw and they say not to use the sw ori alientech.
if it actually does work well, it would be a bargain!

currently, I'm downloading the sw the clone, to see if ? equal to the sw of the ktag ori

[sa80libero]

it would be a really good thing to have the ktag now that many manufacturers use the ecu with this....

[magi1984]

then I downloaded the software and basically it's the software of the KESS original v 1.89 crakkato to work with this ktag clone.
however, I repeat that the SW ? equal and identical to the SW of the original alien

[dolphin]

I also through friends I'm looking for the interface if I can I'll know.

[msport (exil77grande)]

well there is the k-jtag clone I know now you have to see the essence, then, if it goes or not and if sela feel to put his hand on certain types of ecu with a clone.

[dolphin]

quoto sure on the ecu of course ****llo only gold, for? I make my account as all the clones are to be experienced, we hope the person who purchases the face so many car and shares with us his experiences...... Hello to soon

[alfetta80]

quoto sure on the ecu of course ****llo only gold, for? I make my account as all the clones are to be experienced, we hope the person who purchases the face so many car and shares with us his experiences...... Hello to soon

I confirm we must hold to the experiences and evaluate in the best of ways!!

[alfetta80]

well guys, according to you, what should I do?? with my mppsv5 not ce history of making the id of this memory spansion,leaving aside for a moment the galletto2 you to my place programmer affianchereste to v5??possibly that face is damn spansion...or spend the money for the other mpps v12??thanks

[michell]

alfetta80 I'm sorry, can I ask you but this blessed spansion ,that machine the mounts that year, i.e. where you are.....I have a product phew... and no card I found this kind of memory the ecu marelli?????? can you explain to me...graziieee

[fabioefra44]

the v5 you could bring it to the v12's just that you have to purchase the cip and then have a good dose of professionalism in the risaldarlo.

You have for sale in the online shop for the chip to change the mpps from 5 to 12?

[msport (exil77grande)]

You have for sale in the online shop for the chip to change the mpps from 5 to 12?

we can put it no problem.

[alfetta80]

alfetta80 I'm sorry, can I ask you but this blessed spansion ,that machine the mounts that year, i.e. where you are.....I have a product phew... and no card I found this kind of memory the ecu marelli?????? can you explain to me...graziieee

I found a great point 1300 multijet 90cv,I had to do the id to find the gold and then re-write it as I always did with mpps but I don't think is in any way ,at the end of the open to try bdm and or seen that mounts to a memory spansion......
on the other machine I don't know, this is what happened to me personally...

[alfetta80]

we can put it no problem.
once you have bought it then the procedure is difficult??

[msport (exil77grande)]

once you have bought it then the procedure is difficult??

Unsolder/solder will advance to do a true professional.

[alfetta80]

Unsolder/solder will advance to do a true professional.
I imagined!! not a job for me!thanks msport

[sportknight]

sorry guys,with the cock, v2, I do the virtual read,edit and rewrite directly or do I need to cut the file?
in the end I did not understand,but the spansion you do it via the bdm of the rooster v2? why? once I ? was told that the gallov2 differed from the bdm100 for this chance

[fabioefra44]

sorry guys,with the cock, v2, I do the virtual read,edit and rewrite directly or do I need to cut the file?
in the end I did not understand,but the spansion you do it via the bdm of the rooster v2? why? once I ? was told that the gallov2 differed from the bdm100 for this possibility?

The cock,in vers 53,by OBD the expansion of the f? making you the virtual reading of the file,and writes it quietly. Or the actual reading in of jtag,but we always talk about vers 53,not in the vers 48-50.

[sportknight]

are you confused with the 8df that have jtag protocol

the spansion serial do both the gallov2 v48 that the mpps in writing
doubt my was through the bdm port of the gallov2 v48-50 you can also read

[fabioefra44]

are you confused with the 8df that have jtag protocol

the spansion serial do both the gallov2 v48 that the mpps in writing
doubt my was through the bdm port of the gallov2 v48-50 you can also read

I would not say.....the spansion are mounted on the 8df, and makes the cock 53,both by obd with virtual reading and writing,which in bdm and are the new 75/95 cv. While the 48 makes you always virtual read and write by obd,that bdm and are the mjd6f3

[sportknight]

sorry,I don't want to insist but confused spansion that ? a type of flash memory with the jtag ? a protocol,the first you write with mpps,the second only with ktag or gallov2 v53...
the confirmation you can get it at the beginning of the post, where pi? someone confirms that spansion will also write with mpps..

[fabioefra44]

sorry,I don't want to insist but confused spansion that ? a type of flash memory with the jtag ? a protocol,the first you write with mpps,the second only with ktag or gallov2 v53...
the confirmation you can get it at the beginning of the post, where pi? someone confirms that spansion will also write with mpps..

If you are sure of what you say,then try to write with mpps

[msport (exil77grande)]

If you are sure of what you say,then try to write with mpps

sportknight has reason and, in fact, own with mpps can write in the serial the spansion mounted on the mjd6f3

[fabioefra44]

sportknight has reason and, in fact, own with mpps can write in the serial the spansion mounted on the mjd6f3

Sure,but there was talk of the spansion mounted on mj8,or am I wrong?

[sportknight]

the spansion are mounted on 6f3

[msport (exil77grande)]

Sure,but there was talk of the spansion mounted on mj8,or am I wrong?

no, you say that the spansion were mounted only on the new marelli.