View The Full Version : Flash pro v
Hello guys, I just bought from dimtronic their last product (unlike the others should not be rebranded, but their production) is the flash pro v. I have taken it full of kit triprox (edc 17) and passtool for the bmw.. What do you say? I threw almost 5000 euro? The kit includes of course a year of updates (the next is not compulsory and costs 300 euros per year) 15 files (that I need to just because the majority do them by myself) and technical assistance full. Of course we talk about the master interface..
but have you tried to open your tool?
I can not open it, there are the seals for the warranty.. I arrived only today, and I still have it installed and tried. Before this I had the flash pro IV (I had given loan to use a client to him they had sold but had never learned how to use it) for what was nothing more than a kess v2 original but rebranded dimtronic. About this I have ensured that I can do 90 percent of the edc 17 with antituning directly in serial, and the other through the triprox in the boot but with a maximum of one wire to boot.. we'll See.. Among other things should also do the simos mounted on the audi 1.6 tdi directly into the serial
then for the old version, there is who it is addressed to a consumer association and a legal, because from what you have read in the network was not the original but a clone, maybe you have different version but I say to you you + soon, if you post a photo you will understand what you have sold precisely..........
I'm curious as I also see two photos of the tool, and I'd love to see a photo of the screen of the sw, thanks.
I would like to see it too this tool
I have the flash pro 4 and I can say that it is a clone even if they say no now, I have proposed the flashpro5 but not l I considered it, I did cheat once *****and assistance I have done a couple of file f ap off in which I had no problems ,to the performance leave much to be desired
According to me you have taken a large bin... I'm sorry for you.
A friend of mine has recently bought, and these pseudo-sellers have trimmed a clone of the magpro, with which I know that should even be in conflict with legal.
You advance that does not read edc15, edc16c2 of the mercedes and the simos 2.1 does not do...
In addition to my friends have sold to a master that actually reads encrypted files on which you can intervene and is bound to them for the modification of the file, then it is stuck as a slave...
According to me there are better ways to spend a few thousand euros...
Hello guys, I just bought from dimtronic their last product (unlike the others should not be rebranded, but their production) is the flash pro v. I have taken it full of kit triprox (edc 17) and passtool for the bmw.. What do you say? I threw almost 5000 euro? The kit includes of course a year of updates (the next is not compulsory and costs 300 euros per year) 15 files (that I need to just because the majority do them by myself) and technical assistance full. Of course we talk about the master interface..
but why these questions are not the fairies before spending all these money, 5000€ are really many, and is it really a sin to throw away money.
Guys I flash pro IV cel I have and I assure you that it is not a clone.. Even works online only and you update constantly.. And a Kess v2 is very normal but it's original and, above all, is the Master because 90% of the machines I have mapped and defappate from me.. from them I only able to take a map test on a 1.3 multijet and the subsidiary was made well enough.. then I did remove some dtc's and I have not had any problems. For this I decided to take the flash pro V.. Today I install and active then in a week I have to make a bmw x7, and the volvo v50, both with edc17. Then I tell you how it went... I'm attaching the photo of what I got and a screenshot of the software..
then, I have put the flea in the ear, and I've done a bit of phone calls, both dimtronic that magic motorsport.. In practice they (both companies) are not directly the producers of the interfaces but they are only suppliers. In practice, buy electrical equipment from the same company (of which of course have not wanted to tell me the name). In addition to the electrical equipment are also buying protocols. Then assembling the make at their location, that's why aesthetically they look the same. The dimtronic told me that compared to the magpro 2 the flash pro V has some protocol like the one for the pcr 2.1. Also (and this I have seen also from the website) on the pro V I have also one additional tool, which is called passtool and serves to gain access to the F20 BMW.. of this I have not found a trace on the website of Magic Motorsport
Gianpy80
21-03-2016, 12:39
oh I forgot.. I have also said that the first flash pro have taken them right by alientech, but the latter gave him only slave interfaces, and then from the IV started to take them directly from the manufacturer, that's why the version I have I of IV is a master. And, in fact, unlike the clones, the IV that I have is only enabled for passenger cars, on the home screen, where on the clone are enabled also motorcycles, trucks, etc., I cel I have it in grey because the dimtronic has purchased the protocols for these vehicles.
You do one thing in the screen of the kess if I remember correctly in the top right corner there are icons on the flash Pro no try to click on it even if it is all grey. Try clicking on the protocols motion
I tried, but nothing happens, they are just disabled.. among other things I the kess v2 clone is cel I and is not really up-to-date, even advise to disconnect the pc from the internet, instead of the flash pro-IV only works if the pc is connected to internet, just open control updates and if there is someone available it will download and install itself.
Have you tried with the interface attached to the pc?
the box pssword ec l as well as l x 17 to decrypt the password of the ecu protected ... for me and a x17 copy, or better still the same product only with multiple sponsors...you should understand who are the producers uffciciali dell tool!!
it is, in fact, I think I understood that they are the same product with different brand. Today I installed it and I tried to make the reading of a 307 1.6 hdi that I had already defappato time ago and in fact the file does not open with any program and the size is strange. I called them asking for explanations and they told me that we wants to force the sw original to open them. Now this thing annoys me not a little, because obviously I did not spend thousands of euros for a sw original dpo after having spent almost 5k for their interface. I'll post the file, if any of you have a sw original type ******* or the ecm may try to open it and tell me if you can? I have 15 days to send everything back and I'm seriously thinking about it...
Do not listen to him... they only Say nonsense. The history of the soft original is a joke that they told me when I had the opportunity to intercede with them for my friend... The reality is that you have given a slave that reads encrypted files that you send to them, then you must sell 30 euro each. I in your place, we won't miss a day and I rimanderei. So much so that there are you check if you have the protocol of the edc15 and edc16 Mercedes.
Ps: if you do a virtual read on the Fiat for example you will see that it gives you a file that is not encrypted.
in fact I imagined, because I tried to open the file in 2d, and you do not understand anything so I think it is encrypted.. I already said that by tomorrow morning they must figure the problem, or jumps around. I had been clear, I wanted a master interface why on the file I have to work on it myself.
The interface if it is not attached to a car does not feed, and I open the sw.. tomorrow as soon as the connect I look at if it has those two protocols..
for me this interface, and one with what you have spent you diko that with good clones where working not at 100% but.. if you'd call the local competition were more clear!!
he sees it in the system info as marelli decrypted to a maximum hahahahah!!!
ah well, a mind that is equal to the magpro 2 x17 and we can also stay if they have purchased the project from the same manufacturer (also the cost is similar), but if I have sold to 4700 euros a slave interface spacciandola for the master's degree is a scam beautiful and good.
The clones I have too many, I wanted to take something official and more reliable for edc17 antituning given to me to happen more and more often...
if the first images are your, look at that sw and you'll see that below in the lower right there is written the slave, it tries to send back everything and get the money in the back, although the last I see.
then, you upgrade... this morning, given my complaints, I called even the commercial director of the company. He admitted that unlike the flash pro 4, 5 software slave (only sw), and that's why I can not open the file. I said that unlike the triprox, the interface is exclusive of dimtronic, in fact, if you notice is the interface that the sw is completely different from the magpro2 x17.. the triprox and the passtool instead of him providing the same manufacturer of the t-boot magic motorsport but these are used only for the boot. The scelyta to provide interfaces slave was made to say, in order to avoid clones around, and actually if you think about it there may be. For me and other people who have made a contract master, within 48 hours I will put on-line in the client area of a tool to decode and re-encode the file read with the flash pro 5, so I should have no problem. In any case, I said that the contract pprevede a formula satisfied or your money back guarantee worth 30 days, and then I still have a bit of time to decide whether to keep the equipment or return it. Guys for the moment I seem to be pretty serious (aside from the tease of sw original, but I think that the seller has not then competent, often highly technical, in fact, as soon I see the writing that made me notice ugoboss made me immediately call the director of the commercial).. we'll see.. stay tuned and don't worry so much I have paid in instalments, with 7 checks, at most I lose the first, the others if not put me in a condition to work will block them because there is a large breach of contract..
hey glad you, you made me smile with the story of the cheques that are extended, you do know that if they are "post dated" are prohibited by law, and if they immediately put all the proceeds in your bank is forced and pay for it all even if they are "postdatati" ? and then you get a complaint.
Those who spoke of a post dated? ;p glad I will be when it will work for the time being only disappointed, but wait a few days before to block everything I do not see what could do.. I Had bought the x17 would have been the same thing, and from a survey I did for now, the flash pro v and x17 are the only 2 interfaces that are all edc 17 quickly and without having to weld a thousand threads to boot..
That in the end cost almost the same.. I chose the flash pro because I was good with the 4 and because if I had the need to file their cost less given that I still buy *******..
The well-known program for luca stanca, noegr and dtc off
If it were not for the fact that you bought a master and you a slave wouldn't be bad... And anyway, you need a different interface to do the ecu does not support.
I have been following your discourse with regard to the cheques "I paid in instalments with 7 checks, at most I lose the first, the others if not put me in a condition to work will block them " by reading this I understand that you have given 7 cheques in their hand, and if not tell them you have data with the date in white I don't understand how did you dilazionarli.
Honestly if it is occupied, and the secretary but I think he did of the cheques by date and ship each month. However, the problem now is if I will be able to open these files.. yesterday I tried to read a Marelli 6j a Opel corsa 1.3 multijet, and there wasn't even in the list. Called they told me that there will be in the next update. I don't know what to think. You, what would you have bought with that amount?
The story of the next update is not new... I know that they use it often.
I for that figure, I would have taken kess + ktag or galletto that you would cover much more complete, given that you'd have also had the Bdm and jtag for work bench on the units is not feasible from the obd, and leaving aside the speech of the protocols still missing on your.
for what evrei chosen, I support what was said by blackwolf76, more inclined towards kess and k-tag, with regard to the sw slave I do not accept it, if you in the contract you asked a master what must be, even if you give the possibility to decode them online on their site, you're always bound to them, whether it be the internet to you or have a problem on the server you are stopped you are unable to work, without thinking that tomorrow could close the company and you could you maintain with a handful of flies in hand, you listen and try to ask you to send back everything and cancel the contract, then once this is done, evaluate what to take with calm.
Hello gianpy80 I bought the same tool and they told me that he was a master and could open the files easily..but then I send a file to a friend and will not open because it comes out scrambled, and they say that only opens with ecm original, but it is not true at all, in fact it is a slave then I spoke with the manager and he said that I unlocked the tool, but the two weeks have passed ,I am calling everyday and they tell me the same things
I to be able to work in a simpler way, I got a cock that at least I can do edc15, because with flashpro do the machines only from 2005 onwards ..then the file that they are not that great
I also have the flash pro 4, which would have a kess v2 with jtag, for that I wanted a tool that makes the edc 17 in the easiest way.. I also v53 clone to bum.. but to be honest the market is not that there are too many new things aside from magic and dimtronic..
But they have unlocked to you ?
Then, I've spent a lot less
Still no, but it matters that I took the triprox and the passtool, only the triprox costs more than a thousand euros for what I spent.
I also took the tripox and flash pro 5 master
More that they gave me a pc
In fact, if the list can not find even the 6j what is worrying after all those money,
there would also be the new trasdata someone of you tried it?
How much did you spend, including vat? I for flash pro v + triprox + passtool + 15 files 4700 ivato
However, the 6j this morning I tried making it with v53, but I was reading a file of 64 kb then probably felt it in the virtual, but he couldn't do it, then with the flash pro IV I have not had any problems..
Gianpy80
24-03-2016, 14:06
Ugoboss the problem of internet line is common to all interfaces that are official, because their start connect to the server to check for updates, and then without the line does not start even the sw.. also the kess v2 ori, and then the flash pro IV are so ..
I spent 2800€ Vat included with the pc ,flash pro 5 and triprox and 15 files free
Are you sure that's the 5? What is the price of 4
Fabiodegliangeli
24-03-2016, 17:12
100% sure I got it two months ago
If you can send me via pm the quotation of the seller when you made the purchase? So I call him and tell him 2...
From what I can see, they are not consistent even with the prices so they make a bad figure with the customers.
How much did you spend, including vat? I for flash pro v + triprox + passtool + 15 files 4700 ivato
no I have trasdata, and if I remember correctly I came in around 1500€
hello giampy80 they let you know nothing with regard to the release of the tool ?????
Let lose , you are on time to avoid disappointments..........
You know, unfortunately, we've come to
to me, for the moment, have frozen the payment and they gave me unlimited file until it is put on-line platform of decoding the file (everything in writing). However, I've done several ecu nasty (type pcr 2.1 and edc17c43) without any kind of problem (43 connecting only one wire to the boot without resistance, unlike for example the v53 that takes 2 wires and 2 resistors one of which is under the plate that requires a lot of time).. the simos unlock directly to the sw in the boot and then you can read/write in serial. The maps are quite well, at least for the time being I am quite satisfied. Also, since the machining ce I free, I will get to them even the ones that I read with kess and controlling them are pretty accurate. On a turan I have made the map, luca stanca, noegr and elimination of swirl in a single shot and without any kind of problem.
Watch also gave me free files after I made the discussion,but do you know what is the problem that you can't verify any files because it is a tool of the slave and not open them at all ..then after 18 are closed, and you remain locked on Saturdays, you can't do anything, and also throughout the protocol, edc15 there is also some edc16 ,the files that are either I've had no problems, however, you can never understand a map of what they did then to be honest I spent 3000 euros and I am working with a galletto clone, and I make what I want ..then everyone makes his own choices
Try to remove the 4 screws and see that there is in the box, no tool ori has the resistor soldered on the hw and a hw with wrong parts and poor........
In what sense ??
Well, I those outside the protocol, do it with the flash pro IV with no problems. Then given that I have unlimited file I send everything to them without being of them to scevvellarni to remove swirl and stuff. The maps that I do with the iv I can conttollarle and are done well then for the moment I have frozen the payment and then I'm doing having only paid the advance. Among other things, I made several edc 17 antituning soldering a single wire, and even some (cp 46) in the serial. The pcr 2.1 only unlock the boot and then read and written in serial. With the clones of these things you dream about..
everything you've described, you do that with the clones, the pcr 2.1 you are already at least 3 years, so I don't know where is the convenience.
not I are clones that do cp46 serial. Yesterday, I made even a subaru impreza in serial without any problem. Until recently, I used I clones so I know of what I speak, I assure you that now is a whole other world. Never weld more than one wire in the boot (with the rooster on some ecu's there compartment 3/4 wires with resistances) of Course I understand that not everyone wants to spend a few thousand euro but I will do a dozen a week then I would be quite quiet for now (I've already made about fifty) are quite satisfied. We only need to solve the issue of the encrypted files..
Certain, however, that to do it all serves as both the flask pro IV and the V, because the latter as the protocols are older has no almost anything.
cp 46 the laws in botmode, and then write in the serial many times as you want, in any case, everyone is ****** to buy what he wants, the problem is to buy a tool that will allow you to work in autonomy, if you are happy for me speech closed.
but in fact, we are here to talk, not quarrel, god forbid. The cp46, I know that you unlock only boot with the various clones, but with the flash pro v unlock serial. From the next update, also the pcr 2.1 you will be able to unlock in serial. According to me it is a good thing since that saves a lot of time. The maps I have seen that also modify the curves out of the driver so I don't think they use the ecm to map. Just yesterday I was checking one of the impreza diesel which I have sent to you, and there are several ranges out of the driver in the ecm that have changed. If you want I can post ori and mod as well also check out you. It would be nice that this topic is a sort of feedback for this tool and the services that the company offers.. at Least doing a full review, and truthful.
no quarrel for charity, mine was just a discussion to understand, and make you understand what kind of tool you have taken, if the FLASH PRO IV was the clone of kes for me, this is the clone of some other tool, and the fact that they have the sw slave, and cannot he give you the master says a lot about the mastery of that sw, I get half an idea out there, but I certainly can't write it here above, in any case, I repeat that I hope you don't have any issues and that they will succeed, sooner or later, to give you the master.
what I want to tell you is that they are not clones, they are interfaces uffuciali rimarchiate. The flash pro V is a mag pro 2 rebranded, but also the magic of motor sport (which sells the mag pro 2) do not produce their own interface but they are from the same manufacturer of the dimtronic. I don't know if I was able to let me explain. I called myself the magic for ask for ask for clarification and they told me the same thing. So no clone but the interfaces and drivers (in fact, the IV should be fine and is the master). The V the only flaw for now is that it is slave and I have to force to process the file to them (for free), but it is also true that I have put in writing that I will not have to make any payment until the interface will not be unlocked. I from my I see it as a form of seriousness.. I'm remapping 2 machines per day with their instruments, having only paid 500 euro in advance and I praticamento already overpaid the tool only with the machines that I have already done.
Guys I have not 1, but 3 dear friends and customers, to whom scodifico ecu.
That have ALL 3 the FlashPro IV, I opened it and I guarantee you that is a clone of the clone of KESS V2, code SE87-B if you want to cercarvelo online.....
Sell it without the module tricore....
And for those who still has doubts, I say to you that their atrezzo work with their computers chinese 2.22 and codes fw 3.099 and customer code K6666
It IS based on their computers 2.11 the pseudo on their computers.
The program also works on my kess clone with no problems.
It has no online-update, online there you go, because the technical dimsport you install a firewall... and use it online without pronblemi.
If you still have any doubt, you do photos.
Too bad I my clone I paid 120 and these workshops 2500 rate 250 per month, with 10 Free files, of the value of 30...
Try to do a no egr for a polo V 1400 16v with IAW 4AF, since time not the door, you put them in difficulty.... and 10 days of that appearance I file through this workshop....
Eye on what you buy x....
I also have the flash pro 4, which would have a kess v2 with jtag, for that I wanted a tool that makes the edc 17 in the easiest way.. I also v53 clone to bum.. but to be honest the market is not that there are too many new things aside from magic and dimtronic..
Good kess clone with the Jtag..... The invention DImtronic I guess....:-)
You, at least you have the tricore clone him (see absence 3 leds, and chasiss metal instead of the plastic like the official Alientech)
The workshops that I know is way worse, nothing 3core and fw 3.099 customer code K6666 nice eh.....
but can that to the day today, these gentlemen are fool as they are?
Alientech has made a case to the DImtronic selling kess v2 clone chinese with their sticker over the FLASH Pro V.
Their purpose is to sell the maps at 30€ anyway.... not so much steal the 2500€ giving you a clone of low lever without coils capacitive from their pagao 65€ in china....
ahhh!!!!!they made a big affair then your friends. but then I would like to ask you one thing those expert would sell a Decent map for 30 euro?
ahhh!!!!!they made a big affair then your friends. but then I would like to ask you one thing those expert would sell a Decent map for 30 euro?
For 30€, not even the copy and paste you would waste to do it on a file!
then, I have put the flea in the ear, and I've done a bit of phone calls, both dimtronic that magic motorsport.. In practice they (both companies) are not directly the producers of the interfaces but they are only suppliers. In practice, buy electrical equipment from the same company (of which of course have not wanted to tell me the name). In addition to the electrical equipment are also buying protocols. Then assembling the make at their location, that's why aesthetically they look the same. The dimtronic told me that compared to the magpro 2 the flash pro v has some protocol like the one for the pcr 2.1. Also (and this I have seen also from the website) on the pro v I have also one additional tool, which is called passtool and serves to gain access to the f20 bmw.. Of this I have not found a trace on the website of magic motorsport
I invite you to read the rules I also believe it is only a matter of education to occur before entering the home of others.
mr. francis gaglio (seen that you have signed so I invite you to read the rules and regulations that already for a long time it should know and go first in the presentations, and then, if anything, to intervene in other discussions,anyway, the invitation not to make recordings, because it seems that her ip address and the nick's jig are the same and not to write in a threatening way towards other users here, just write your own experiences, things that you normally do in the forum then if you only accepted the praise changes also saw that you have our personal contacts, so please next time contact us directly for any issues,thank you in advance.
I invite you to read the rules I also believe it is only a matter of education to occur before entering the home of others to write in a discussion and defend those who maybe she really represents and did not even have the courage to expose.
Hi to all, I still work with the Dimtronic I have the flashpro 4, and by February the flashpro 5. I have to say that I am well soprrattutto with the technical assistance, are friendly, available and with a lot of patience. The thing that makes me a bit laugh, and to hear about people who are always working solely with the tools, cloned and even make changes on the interfaces to update the versions. These same people are the ones who for years have taken advantage of the fact that there were companies that redevano easy to work with the electronics through the interface and with a seguimnto capillary and have clubbed the unsuspecting garages to the sound of hundreds of euros for machining simple . Today that many, many workshops have been organized with tools purchased from the companies that they put you in the conditions to do the work to be just to these people, he lacks the easy money, and I know they are rosicando with a girl........ and then what do they do ??? throw M...on companies around.... I to date I have had no problem , and I have also worked with Alientech which is without a doubt a good company but too little, too flexible and with a little patience .
This is my experience..... a greeting to suggest........
I like these interventions, one enters and the first message enters it in the right discussion, that speaks to his instrument and begins to shoot at zero, I don't know you but I am not convinced your intervention, I ask but one thing, your flashpro 5 is master or slave?
thanks for the reply.
What you want it to be hugh, but the master china obvious......
I do not want to take sides of anyone, I'm an operator/user of the industry that works with Alientech, FG etc....
And I can tell you that in everything the fool is DImxxxx and we know why----
And managed to sell the product before the clone spacciandoli x a their product only by changing the icono of the sw.
And then to spoil a good product as it could be in the source MAG of the Macig.
In fact, they do NOT assemble a blessed beep, appicciano only a sticker on a product is not their....
And you install the firewall to not to go online, odd x a the official no...
Are not even able to take trade agreements, serious, saw that they bought from the manufacturer of the SLAVE!!!!!
Claiming to MASTER, and now to apologise file free until CHRISTMAS!!!!!
And asked for first 2500€ rate€ 500 monthly x a clone.
And then 5000€ for a SLAVE!!!!!!
They will also be friendly and courteous in you to files 30€ cacate....
BUT to me with the subscription they have made to wait for 1 and I say 1 month, not 1 day, for a cabbage EGR OFF and mappetta bland its a POLO 1400i engine of the GOLF 2002.....
BUT we are kidding......
How you defend the work in their cal center and perhaps we have even spoken.
And you are so awake that I have installed the vs FLASH PRO aka their computers 2.10 on my kess chinese fw 4.036.....
Great!!!!!
Knowing what it was I asked I want to make the iveco daily EDC16C34...... And you the PRO V is out of production.... it was better to say, if you have a clone not you can add them.... If it was a true alientech jonatan, I would have asked 400€ x protocol daily edc16 and I worked in peace.
Obviously, to you + convenient Magic to make you the WARRANTY, because who knows how many kess china you have thrown in the toilet.
With fw 3.099 and SD mod UNlimieted token, not bad x 2500€
And poured in their complaints Known, and I believe.....
Mr NOBODY!!!!
Thoughtful people.... there is the atrezzo best of all, only those in the know place it behind the better.... other things that suggest....
If I would be somebody that you criticized would say.....
YOU, however, we see that you are a chemical engineer, is the fava, as scorreggi from the mouth.... and that works for the devil, who defend by the sword.... as the trident maserati...:-)
idea let's give the protocol number of the patent that they have delivered from the lords of the dimtronic to clarify everything
I know that I have touched a raw nerve as it is heated, the discussion (and yet I did not do names...) however, I stand behind my work and the money that I spent to buy my tool, nothing else, no other . On a forum you can write your own experiences in a democratic and civil, but perhaps not all know what it means.... Then if someone wants more in-depth explanations , seen flying words in a few orthodox churches, and in this regard, I was expecting an intervention of the directors, are at your disposal, but outside of the forum.... With this I close, and in view of the mediocrity of the discussion I will not give more below....... I forgot ,however , am a repair technician for about 20 years....good job to all
sorry but, you say you really or are you joking? but that you believe ke here we all crazy or what? you do well to defend your work, but I agree with say stupid things before you said I know, alientech, and that they are just as flexible........bheee, I can say with certainty ke you said a bullshit and also the great " I work for more than 5 years with them I've spent almost 20000 euros and I assure you ke mr jonatan has given me flexibility and I can assure you ke their intent, but I sell you the map to the 30 euro, but I formed you, and get the most from their tool.
I know that I have touched a raw nerve as it is heated, the discussion (and yet I did not do names...) however, I stand behind my work and the money that I spent to buy my tool, nothing else, no other . On a forum you can write your own experiences in a democratic and civil, but perhaps not all know what it means.... Then if someone wants more in-depth explanations , seen flying words in a few orthodox churches, and in this regard, I was expecting an intervention of the directors, are at your disposal, but outside of the forum.... With this I close, and in view of the mediocrity of the discussion I will not give more below....... I forgot ,however , am a repair technician for about 20 years....good job to all
on the forum you can write your own experiences, right, but for education it is also fair to present themselves before writing, then I don't see why would you want to clarify outside of the forum, you've been writing here over and above to education should continue, I had only asked if your sw is a master or slave, but you pretend not to understand, in any case, if you don't want more talking you do is to confirm what I think of you, finally if you are a car repairer for 20 years, I do not see what centers with this story, and I did it for many more years, and then? and with this I leave everything in the hands of the administrators of the forum, will be able to decide on the best.
That I know of lately, the flash pro-V have been recalled, as though sold as the master worked only by slaves, and remote it was not possible to upgrade...
Ps: I would like to understand what does the experience from autoripatore with the equipment that one buys...
Maybe those who run the chinese clones from 4 money probably has the most ability of those who buy tools official file by the thirty euros which, as I have been able to verify are not always what you can define a ****work...
I confirm in quandto my friend does not have add!!!
Dear Gianpy80 who gave you this information? And' sure what that says? He really called the Magicmotorsport? With those who have spoken...?Are you aware that spreading false information can be a starting point for a nice a complaint...? As work in this sector? I ask you to be well informed before you write...or call the manufacturer if you know it...she has done quite a bit of confusion...please do not spread false news because I assure you that she has never called the magicmotorsport, and then no one has been able to provide the information that you described for this should rectify all the information entered since they are false, and the the board of inquire and study better before to write because of what it says shows its inexperience in the field, users much more experienced of you have already responded, but I wanted to clarify and ensure that the users of the forum that what you write is all fake. In case you want to explanations call the magicmotorsport, truly, however, will be given the information that it asks and the next time the council to be less cocky and more careful in what she says.
excuse me, and she who would be§? the paladin of justice? only one post and already you make such insinuations? the council to take a ride elsewhere, and not to create disorder, to whom this work is an attempt to do it, the more seriament possible.
However, the update for the others:
For about a month, I was activated the portal to the encoding/decoding of files and it works perfectly. The interface has been updated with the addition of over 900 protocols and to date I have read/written dozens of cars without any problem.. The maps now I can make them I decodificandole from me in 20 seconds or I can send them that with 30 euro and about half an hour of the recall and are perfect then for me, feedback is more than positive, from the OWNER... all those who speak for heard are only a CHAT FORUM of people that believe they are able to work seriously and professionally with interfaces in chinese from 20 euro and here I stop..
I forgot.. do not install any firewall or anything.. don't write crap... I the flash prov I install it by only 1 minute on the clock.. it works only online because when you open the software is immediately the search for updates, and every so often makes them so they are not fake as some might think to write.. so for me EVERYTHING is resolved and I am very satisfied with both the ui and of the company as EVERYTHING that I have promised at the time of purchase, albeit with a little delay, has been given to me...
I invite you to read the rules I also believe it is only a matter of education to occur before entering the home of others.
**************************
mr. francis gaglio (seen that you have signed so I invite you to read the rules and regulations that already for a long time it should know and go first in the presentations, and then, if anything, to intervene in other discussions,but the invitation not to make recordings, because it seems that her ip address and the nick's jig are the same and not to write in a threatening way towards other users here, just write your own experiences, things that you normally do in the forum then if you only accepted the praise of the thing changes,also saw that you have our personal contacts, so please next time contact us directly for any issues,thank you in advance.
###############
I invite you to read the rules I also believe it is only a matter of education to occur before entering the home of others to write in a discussion and defend those who maybe she really represents and did not even have the courage to expose.
############
###### you know me well, I have presented in 2015, we have also done a course with you and Mario, are not inscribed 2 times but it is just a colleague in my same Job, I don't think I have offended anyone, or discredited the work of the others, I think that the lies are irritating to any human being that is not Holy
Hello and Good Work
###### you know me well, I have presented in 2015, we have also done a course with you and Mario, are not inscribed 2 times but it is just a colleague in my same Job, I don't think I have offended anyone, or discredited the work of the others, I think that the lies are irritating to any human being that is not Holy
Hello and Good Work
1° are not #######,2° in the forum you have the nick, and with these, you must contact and 3rd nobody here discredits none, but have only reported on its own experience topic closed otherwise the beginning to make it a clean sweep.
if I can add me to the list of scammed by dimtronic!
sell material on an exclusive basis and they say the best around and instead and around a clone!
bari are boys and I took in that place I also...
only that I've spent half of the money...and I heard that they sold 700 800 300 2500 to 5000 all prices are in...
surely the lord knows how to do with the sale and very good in the dialectic along with the flash pro would be able to sell products for the shower!
guys I'm sorry for everyone including myself but I raises the fact that he was not the only fool..
I assure you for the whole of italy expect to catch them with a nice bat...:) then c a person to alientech that and in the cause with their that tells the story of cooked and raw..
of course, if you speak with dimtronic they have been cloned!
l'italia luck to them, and that country that allows all this!
Riappo this discussion...saying that 2 days ago, I took this Flash tool Pro 5 ... recommended to us by friends that have found good to have a like magpro less... but I am only getting the tool Flash pro with cables and software with platform master... I've spent + 3000.
I already have 2 problems... I tried to read by OBD 2 change DSG DQ250 Fxx ...and the 2 I have given the error in the identification of the ecu with written contact the customer support... let's start very bad to be honest.
Then I saw in the site the flash package pro 5 with the stock exchange, the passtool and the triprox... honestly, having only received the instrument we are a little' been bad...now I do not know' even what I can do in the obd, and what is not.
for the problem of reading you must call the assistance, for the package I think you'd be interested in first and ask well what is included, the inmagini that put on the websites are always the most complete, and as the advertising of the car make you always see the most accessorized and put the price of the base with so many asterisks.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.