View The Full Version : deleting dtc egr edc16c39S

giuseppe89

cinqueturbo

Have you used any Software for the EGR?
I just 1C6A58 & 1C6B8C
I know that you'd like to do a work coat clean,
but if it is urgent you can use a resistor 39ohm 5 watt ceramic...

otherwise it waits for the responses..

giuseppe89

cinqueturbo

hello Cinqueturbo you I used time,I used it also on my delta and it has not given me problems on this car but the egr is faulty and I should delete the related dtcs... what your address?at the command of the valve? I see that it is a map 25x1

joseph is the classic panettone of the EGR..

Damos calls them;
Exhaust Gas Recirculation-Monitorage And Shutoff

Upper hysteresis shut-off curves for large injected fuel quantity

Lower hysteresis shut-off curves for large injected fuel quantity

the box the DTC I have not the faintest idea..
but I have an idea..

1FC2BA
Tester demand monitoring enable mask for Exhoust Gas Recirculation (1x1)

one-to-one (physical value is equal to the internal value)/-

-
0
- 0 7.00

cinqueturbo

joseph is the classic panettone of the EGR..

Damos calls them;
Exhaust Gas Recirculation-Monitorage And Shutoff

Upper hysteresis shut-off curves for large injected fuel quantity

Lower hysteresis shut-off curves for large injected fuel quantity

the box the DTC I have not the faintest idea..
but I have an idea..

1FC2BA
Tester demand monitoring enable mask for Exhoust Gas Recirculation (1x1)

one-to-one (physical value is equal to the internal value)/-

-
0
- 0 7.00

Attention 8bit!!

the other butt..
1C66C8 8bit
Value of Governor switch (0: governer off - controll only, 1: governer on) (1x1)

one-to-one (physical value is equal to the internal value)/-

-
0
- 0 1.00

Errecinque

As soon as I'm at the pc I look at the file
And try to remove the dtc

giuseppe89

Guys are able to delete the dtc,but I have not deleted those 3 specifically, but by comparing the file with one that I made previously (but different) I was able to go back to the area of dtc related to egr and I put it to zero.everything seems to be ok as soon as I can place the addresses of my intervention.thanks to all of the interest

Errecinque

The addresses to be reset for errors p0490 = 1CBF12 p0409 = 1CBF13 p0487 = 1CBF18

if I confirm, and I text the solution joseph I update the DB of the dtc

Errecinque

Oh, I forgot, very important : Reset the display 8bit

giuseppe89

Errecinque unfortunately, I had to deliver the car immediately and I have not been able to test your address,I solved it by locating the area of dtc dell egr through a file done some time ago,in this case, I paved the address 1CBF03 to 1CBF1A. No, I know what mistakes might have been turned off due to the haste, had,to secure the po409 and the p0490...the car is now being circulated for two days without problems,if I ricapita under the hand I do your test.Then if you need to do some tests on this car,I have the same on which I can be of help when you need it.Thank you all and I will keep you updated if it comes back back on the car!