View The Full Version : Kess v2 4.036 blocked
Hello to all , I ask your help to unlock the kess 4.036 locked for the token, I tried with the steps in the installation disk , but no go.
Hello to all , I ask your help to unlock the kess 4.036 locked for the token, I tried with the steps in the installation disk , but no go.
Hello Claudiooreste, please contact Passion Motors in the forum that is a professional for these things
Ok thanks a lot for the council.
Ok thanks a lot for the council.
six managed to unlock the kess?
You todos are managed with a little patience , thank you.
You todos are managed with a little patience , thank you.
Would it be fair on your part since you open the post, for the good of the community that explain how you did so that other users with the same problem can resolve.
I had to replace the SD card present inside the kess appropriately formatted and then, I've rewritten the original files that he sent me the seller and redid the restore procedure token is present in the supplied CD .
I had to replace the SD card present inside the kess appropriately formatted and then, I've rewritten the original files that he sent me the seller and redid the restore procedure token is present in the supplied CD .
Thanks .Replace just, for some reason, due to the tool or just reformat it?
No , I had to replace it maybe because I was wrong to do the procedure the first time and then passed the other tests without success , I eventually contacted the seller that I was supportatato and did do the procedure I described before.
I had to replace the SD card present inside the kess appropriately formatted and then, I've rewritten the original files that he sent me the seller and redid the restore procedure token is present in the supplied CD .
I'm sorry, you asked why I for case exchange the sd of another kess makes me the procedure of the token
Apparently if it is a mistake to make the procedure of token , for what I understand it corrupts a file on the sd card and then the seller recommends that you change it.
Apparently if it is a mistake to make the procedure of token , for what I understand it corrupts a file on the sd card and then the seller recommends that you change it.
if it were true it would be enough to format the card and replace the files, the reason is, but it is another.
Yes I know the reason, you need to change the serial number in the sd card then put it back as before, always by the formatting..
But to you it's already happened and you have solved so.
So if you repeat the problem you know how to solve it.
is it possible to have the step-by-step and the name of the program used to reset thanks.
hi,I'm intruding into the discussion to extend to you a question since I am by buying kess and ktag cn to start with before making a wrong investment,the seller tells me that these two devices have no limitations token is?thanks
[QUOTE=teamfox;122284]hello,I'm intruding into the discussion to extend to you a question since I am by buying kess and ktag cn to start with before making a wrong investment,the seller tells me that these two devices have no limitations token is?
From what I know however, it is necessary to have a procedure that I did and bob I know of which should be talked about here, plus there is a template( clone) that resets easily with a key, but I have asked 100e.
[QUOTE=teamfox;122284]hello,I'm intruding into the discussion to extend to you a question since I am by buying kess and ktag cn to start with before making a wrong investment,the seller tells me that these two devices have no limitations token is?
From what I know however, it is necessary to have a procedure that I did and bob I know of which should be talked about here, plus there is a template( clone) that resets easily with a key, but I have asked 100e.
It is, in fact, I've noticed that some of the cn had this key and some of the damage together with j-link that I don't know what it is but I believe it will serve to reset the token, correct me if I'm wrong, but is so for both kess and ktag?
how do you see how many scriptures will it remain ?count readings?
how do you see how many scriptures will it remain ?count readings?
You said the program at the moment that is about to expire
does anyone know if you count the readings?
the software that runs on the network x to reset the token is a hoax then? you connect the tool to the usb and process it with this software
sdormatter only serves to format the sd card as if it were new,then obvious that you have to restore the sd
Sorry, then just copy the data in the sd card and then when it crashes, format and put back the old data?
Sorry, then just copy the data in the sd card and then when it crashes, format and put back the old data?
I think not.
It was too beautiful in fact , but inside this sd what type of data it contains and if I put a better quality increase the performance of the tool?
formatted sdcard with sdformatter,
the inserted card is blank inside mb of kess,
connected to the pc and loaded the protocols with their computers 2.08,
reset the token always with their computers 2.08,
installed on their computers 1.89,
run 10 the scriptures with their computers 1.89,
updated the pc on their computers 2.30 and everything works like new.
Thanks Henry for saying how you fixed it.Would you do me the courtesy to see if in the list of the ecu protocols and that the kess is the protocol(fam) for Opel 373 ?Thanks.
Thanks Henry for saying how you fixed it.Would you do me the courtesy to see if in the list of the ecu protocols and that the kess is the protocol(fam) for Opel 373 ?Thanks.
formatted sdcard with sdformatter,
the inserted card is blank inside mb of kess,
connected to the pc and loaded the protocols with their computers 2.08,
reset the token always with their computers 2.08,
installed on their computers 1.89,
run 10 the scriptures with their computers 1.89,
updated the pc on their computers 2.30 and everything works like new.
I forgot a step:
before update the pc on their computers 2.30 you have to re-delete the sd card and reload the protocols with their computers 2.08
Hello Enrico, sorry, a clarification.We are talking about a clone right?Because the official one, I know already that supports the protocol 373 for connection via obd for the ecu Delphi dcm3.7.Thanks to the availability.
Hello Enrico, sorry, a clarification.We are talking about a clone right?Because the official one, I know already that supports the protocol 373 for connection via obd for the ecu Delphi dcm3.7.Thanks to the availability.
Hello Enrico, sorry, a clarification.We are talking about a clone right?Because the official one, I know already that supports the protocol 373 for connection via obd for the ecu Delphi dcm3.7.Thanks to the availability.
Hello Enrico, sorry, a clarification.We are talking about a clone right?Because the official one, I know already that supports the protocol 373 for connection via obd for the ecu Delphi dcm3.7.Thanks to the availability.
Hello Henry,pleasure.I really are introduced just 1 year ago.I was going to ask you about the area, because your surname is very common in and around Ud.
Hello Henry,pleasure.I really are introduced just 1 year ago.I was going to ask you about the area, because your surname is very common in and around Ud.
Hello Henry, took what you advised me.It works fine.Thanks.
Hello Henry, took what you advised me.It works fine.Thanks.
well, I'm glad :) let's get organized for the beer :D
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.