eismann

With this Thread (as that of the galletto2) I would like to collect all of your experiences with this clone, both the positive and the negative, so to have a glance on those who have already had the experience...and to share the positive experiences

- Fiat Punto evo 1.3 mjt 75hp marelli 8df - Read (10min) and writing (20 min)

For now only this :p

scican25

bmw 330 edc16c31 read and written
the alfa brera edc16c39 read and written
alfa mito edc16c39 read and written
the punto evo mjd8f read and written
fiesta sid 802 read and written
focus 2-0 tdci sid 803 read and written
ford kuga sid 206 read and written
mazda 5 denso read and written
mercedes a class 170 edc15 read and written
- class a 180 cdi edc16c32 read and written
class b 200 cdi edc16c31 read and written
mercedes sprinter edc16c31 read and written

franco-electr

renaul scenic 3 1.5
lancia musa 1.3 95cv

carlo abarth

fiesta sid 804 read and written
the kuga dcm 3.5 read and written

car

excuse me guys ,I would like to know if all of those lists cars were read by obd or on bench because I also possess a kess clone.
thanks

eismann

Today I read an Alfa Mito 1.6, is it possible that I have read all over the micro? but then, why compare it with the file BDM, however, even very small differences there are!?

fuorigiri12000

Read and written in eobd 10min about
BMW 150hp DDE7

Fabiuz

-VAG Golf 7 2.0 TDI 140cv EDC17-CP14 read in tricore and cloned
-Bmw 320D EDC16-C31 read and write by obd
-The Alfa Brera 2400jtm 210cv edc16-C39 read and write by obd
-Audi A6 2500TDI 180 hp EDC15VM+ read and written from the obd
-Range Rover Discovery 2700TD V6 Sid201 read and written from the obd
-VAG Golf 5/6, Audi A3, from the old EDC15 to EDC16+ read and written without problems
etc.. etc..

todos

Guys someone has read it with kess ecu Siemens sid 807 evo ford...

BlackFog

Guys someone has read it with kess ecu Siemens sid 807 evo ford...
Hello I will.. Read 15 minutes and write 22/23 minutes :)

todos

Hello I will.. Read 15 minutes and write 22/23 minutes :)

T Dc ok can you tell me how did you read by obd or with the JTAG..

Fabiuz

Hello I will.. Read 15 minutes and write 22/23 minutes :)
I had made it, but with the Ktag 6.070
You sure have made it with the kess? because from their computers missing the mark on RD (read direct) as if the law only in the virtual, and then should only write it but not read it

Fabiuz

I also add the scabby Delphi MCP555 of the jaguar X-Type with wing nut failed miserably reading.
Read and written from the obd without any problems

motorsport

Bmw 3 series e90 2006 bosch edc16c35 Read 38minuti written in 5 minutes in the serial!

motorsport

Guys kiedo if someone made serial Ford ka 2012 md8f 1.3 mjet ,it should be the same as the grande punto evo ?
thanks in advance!

mauri0075

Hello.Those of you who I know to say if with this kess is possible to read/write via obd Delphi DCM3.7 a Opel Antara 2.2 163cv?Thanks.

Jackcloud

You can try to read this article

mauri0075

Hello.I don't understand that article.I would like to know if the kess v2 clone V2.22 firmware 4.036 you can do in the obd a Delphi dcm 3.7 Opel/GM.Thanks.

carfree

it is illegal to speak about products clone in this forum .

mauri0075

Hello,but who are you?Go to the first page and read the first message.

overbooster

Someone has programmed in serial Opel Edc 15m?

carfree

Someone has programmed in serial Opel Edc 15m?
What year is that model of opel is cubic capacity horsepower@.you should be doing in the serial

overbooster

What year is that model of opel is cubic capacity horsepower@.you should be doing in the serial

Astra DTI 100 cv 2001

Thanks

carfree

Astra DTI 100 cv 2001

Thanks

Sisi you do it via the serial connection if there is you have it in the list...

lui93

hi guys I wanted to know if anyone of you written a ford fokus c-max 2009 with the kess..
thanks a lot ;)

mauri0075

Read and written safely ecu Delphi dcm 3.7 Opel Antara 2.2 163 hp via obd.

salvatoreragonese

boys c and read a fiesta 1400 51,50 kw engine code kvja mount electronic bosch

dragusdrake

hi guys I wanted to know if anyone of you written a ford fokus c-max 2009 with the kess..
thanks a lot ;)

edc16 can be done easily

dragusdrake

boys c and read a fiesta 1400 51,50 kw engine code kvja mount electronic bosch

what year is it?

salvatoreragonese

what year is it?
Hi dragus should be 2011/12, however, in the list with the entry 1400 I can't find it

dragusdrake

You can not do it with the clone

salvatoreragonese

You can not do it with the clone

Stupid question it might not work with the protocol of the 1600? And on the bench?

Mystral

boys c and read a fiesta 1400 51,50 kw engine code kvja mount electronic bosch

I have read with the clone tool and ecm titanium thereís also the driver, but be aware that the reading may not be correct. Mount a Bosch EDC17C10 Tprot07, therefore, it is appropriate to do it in the boot with ktag on the bench.