info!!!

[frenk85]

Hi guys,I wanted a info
It is possible to install a map on an eprom with the same sw, but hw different?!?hw are of the "updates"?!?!
I risk that blocks the ecu?!?! Thanks!

[overbooster]

if they are updates of home of the mother go quiet. Then if you explain even better about what we're talking about....

[frenk85]

Thanks overbooster!!!
I have two ecus with the sw the same but with hw different 955 392 and 955 961 and the well-known "differences" and 955 998 that will be the last update
For example, if the map key are the same, and I wanted to know if these updates can I in any way better or are they just to help....

[carlo abarth]

the 955 and a punto jtd??'

[frenk85]

It is a punto jtd

[Errecinque]

Thanks overbooster!!!
I have two ecus with the sw the same but with hw different 955 392 and 955 961 and the well-known "differences" and 955 998 that will be the last update
For example, if the map key are the same, and I wanted to know if these updates can I in any way better or are they just to help....

Sorry, but it is not to the contrary? that is, you must have the hw the same, and you can put sw different? I ask for enlightenment. Thanks

[overbooster]

careful nn are updates, but files that are different between them!!! updates have 3 codes: Hw, SW and Agg type 955-392 xxx...
then you have to see the 3 software that you have if you have the same car, engine, kw, set-up etc., it is said that with other software I put in the bike but you can have the risk that something will not work.

[overbooster]

Sorry, but it is not to the contrary? that is, you must have the hw the same, and you can put sw different? I ask for enlightenment. Thanks

Errecinque has the wrong frenk85... where to write the opposite, they always get the hardware you need to adhere to, or some other hardware that is compatible with the ecu

[frenk85]

You excuse me I'm confused!have patience!!
Then if I put the 955-961 in the control unit 955-392 risk of blocking it?!?!

[overbooster]

I don't know I never did this test but they have the same dimension as the

[frenk85]

It is the same size!

[andrea80]

On some of the ECU in the boot you can fare...su high risk of lock...already tested ..

[tranky]

hello frenk85
theoretically, will block you in writing if you do not metcha chs or gives you error key code (success with a 332_642 with file 332_962).. but you better copy the areas of the map on the golds of the file up to date in this way report the same increments on the right file.

[frenk85]

Why, then, is said to be possible?!?!
So in my case block?!?!

[andrea80]

You may....it means you may. .

[tranky]

It is not a matter of circumstances but of software.
Try it and see what happens but 90% gives you the key code.
Restores, and you're spot on

[frenk85]

I put in the file and not the part,the control unit communicates but nothing. Only that I can not longer enter the original one,gives me error speed change*****and do

[tranky]

With what do you do the push?
Galletto, mpps or what?

[tranky]

I still have to understand the way of doing what you did.. You had a map on the other file, and you wanted to put the tu on your ECU?

[frenk85]

Galletto 1250
I wanted to have two ecus With the same file

[tranky]

Now, or try with mpps to make a push with gold without checking id or you can with the rooster, but the v54 to rewrite the flash.
I do not know the 1260, and I don't know how it works to ****llo software

[frenk85]

Id not l' I acted as a "protocol " he tried with the v54

[canotto2000]

However, I think that if you have the same hardware, the software can be compatible...