Renault Megane III 1.5 110cv Sid305

[canotto2000]

Hi guys,
as a first experiment I have read the ecu in the object, file size of 1.5 mb.
I have to say that the ecu has undergone a mapping light to limit flicker to 2000rpm with the gas constant.
Opening the ECM I can't find the driver...
The data control unit hw 0037R sw 0386 upg 4632
I tried a bit around and I can't find either the original file that is compatible!
Can you help me?
Thanks in advance

[antonios25]

Hello as you read the ecu? it would take a screen shot of the data in the ecu, so I see if I can help you with the file ori.
With regard to the ecm if you have the automatic search nos you will never find the driver because the file has been modified

[canotto2000]

Hello Antonio, I have read with kess v2...
Then, if you load the file resulting from the reading does not find the drive because it has already been amended, and here we are, and even if the technical explanation I don't know...
I tried to download the original files from the internet, who say they have read with kess and the same ecu, but the numbers of hd and sw, the result is the same, and are totLmente different from my own...

[canotto2000]

This is the Ecu bad...

[andrea80]

If you write the number in the SW and I could help you with the gold..

[canotto2000]

Hi thanks, in the photo it reads well.

[canotto2000]

Raga, then can you help me?

[sportknight]

no driver for that ecu probably,you have to go to hand ;)

[Alfiuccio]

proceed to the hand

[canotto2000]

See na word... this map is a mess... I can not find even a similar...

[canotto2000]

Who can help me with addresses to find the maps?
I want to try 2D...

[sportknight]

Find another siemens also Ford and studied the one that sure has the driver

[canotto2000]

Thanks sportk, but which model has the same ecu? Kuka is 2000cc right?

[sportknight]

same ecu no, but it is easy to locate the maps,however, also many nissan's have the same ecu

[andrea80]

Also qashqai.....

[fabiovts88]

I had a megane 3 110cv dci eye with the increases because of the damage and then problems with the fap if they are bad

[scican25]

if you know where to tap you can open the driver manually
when you go to load the file in the ecm is the scan.. not finding the file
the go to search in the dropdown menu by taking the car--> model car --> type ecu
so you open the file with the driver , the eye opens to you the modified file so that you can not take the idea as if it were the original, but if you work in 2d you already know what's tap you can be useful to do so

[canotto2000]

Thanks scican25, I have been very busy in the past few days and I have not been able to reply to you, this evening I try and tell you.