Matty23p

Hello guys, someone of you has tried to use the elm bluetooth with the mes? :confused:

tranky

clone or ori?
good and works well..

tranky

even with torque on android, works decently

thekid

normally use the cable (I trust more to the dynamic reading), but I have also tried the bluetooth for the cancellation of a erorri etc and it was fine. Of course, less plug&play usb cable in the sense you have to make it recognize the pc and the config port on multiecuscan

tranky

normally use the cable (I trust more to the dynamic reading), but I have also tried the bluetooth for the cancellation of a erorri etc and it was fine. Of course, less plug&play usb cable in the sense you have to make it recognize the pc and the config port on multiecuscan

quoto as the bluetooth on the system folder is really worth and is stable as a breadstick in the cement (build-in or usb)

Matty23p

Thanks guys, I was just afraid that did not work well the Bluetooth...saw that you works the I Bluetooth 😉

tranky

Look for experience, I will say that the BT model does not require changes to the diagnosis and multi-brand while the USB is only group-FIAT/ALFA/LANCIA saw that MES has limitation of Vendor and the USB requires changes on the pins of the socket OBD2.
For convenience, for read-only errors and the diagnosis based go great with that BT, for other features in real-time and diagnosis series is not convenient to the clone, but only the Original one (alternatively you can just change the chip elm327 and mount it on the tab of the clone).
I hope is clear the concept

tranky

in BT in multi-brand with torque, I mean, of course..

carlo abarth

I have all versions and they work great!!!

Matty23p

You all clear. Thanks to all.