View The Full Version : Nevertheless, 8f2.g1 and v54
Good evening, I should try to read in virtual this the ecu of the grande punto 75hp euro5 s&s, I have read somewhere that c is the person who reads precisely with the rooster, but in the protocols I don't find this ecu, which should I choose?
No, this should be read in J-Tag. If you have Galletto v54 can do. Here's the procedure.
law in virtual,make the reading of the injectors before writing
law in virtual,make the reading of the injectors before writing
It would be nice that you could tell us with which the protocol must run the virtual reading of the above... I personally have never risked on this...only J-Tag!
read virtual would be if in the data base, gel cock or any other tool that hides any such ecu!!!
as says charles "goofy" abarth for fgare the virtual read the rooster must have the file in its internal memory, otherwise, nothing, or the open "very gently" and the laws in jtag, the last board you get a kiss clone with the latest updates that are on the network and read and write with no problems really in about 5-6 minutes.
read virtual would be if in the data base, gel cock or any other tool that hides any such ecu!!!
Indeed...but the question was placed on the galletto v54, and then nothing virtual read! Needless to confuse you even more ideas. The galletto v54 these are the only do it in J-Tag.
Indeed...but the question was placed on the galletto v54, and then nothing virtual read! Needless to confuse you even more ideas. The galletto v54 these are the only do it in J-Tag.
this is not to confuse the ideas with the v54 reading virtual you can do, but you have to have the file in the database, and I have read a couple in the virtual, but many others not there, he can try to limit does not save nothing, at the end we lost a little time.
Indeed...but the question was placed on the galletto v54, and then nothing virtual read! Needless to confuse you even more ideas. The galletto v54 these are the only do it in J-Tag.
but where sorry??
the v54 has protocols for serial the mj8,the selections and if not done it is because it does not have the file in the database, and you're forced to do it in jtag or to find a file the original with the same number of hw and sw to write it in the serial,done several times...
I don't understand what is your problem...
I see no other solution that to retrieve the file online
If you recover the file ori, avoid open it and make virtual read...modify and write in obd ..so the cock you is to write quietly
eye to the file read in bdm, no checksum
guys been doing a bit of casino, these are not the laws in the bdm, but in the jtag, and fabiuz tell me what he wants to say "no checksum"
In fact... In the jtag... - free checksum is right.... xchè if you do not have the checksum the exact locks the ECU..
that in reading in jtag you have a file without the checksum.
I was wrong to write. And the Mjd6f that is in the BDM
why do you say that you have a reading without cks, if you read the map ori, the cks is there and in place, I have read several, and modified and written without problems.
If you read his detailed ori
But if the drains...
when you upload the cks te calculates the tool, is that the write in jtag is a serial port.
good to know. I even asked for a write-in jtag
Guys this is not a ECU that is hostile is not a EDC17..
the first apples I read in jtag.. Then Just!!! only in serial never drive problems Gallo V53 & V54
Then on these in the case of blocking the resume, however, on the bench,
I nailed my to the truck 3 times on a whim 1° by removing power from the frame, 2° by Pulling on the OBD, 3rd spending the PC...
Having the file Ori, of Course...
I'm sorry, five turbo. ..***** and the resume with the rooster ? I own it and I have read the documents within. Do you have a photo? Might serve me in the future. ...thanks
I'm sorry, five turbo. ..***** and the resume with the rooster ? I own it and I have read the documents within. Do you have a photo? Might serve me in the future. ...thanks
Sorry that the photo you need?
You I with the Cock
re-enter the flash serial jtag to tour,if something is missing at the maximum of the rebuild ;)
however, usually a serial port you do without problems
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.