Help the map

[max75]

hello, and much much more now I only have to scan mofifiche of exclusions egr /fap with a decent result.....but through the software...I personally still are not able to change...I'm trying to study..use ecm 2001v6.3....I have no driver for my car GP....I have other files in always a Great Point...but no driver compatibile...su which base should I start....I would like to make some slight modification, but I don't know how to start....some help ? can..... thanks

[magi1984]

start by posting the original file + the mapped if gi? you have one
cos? we may be able to give an opinion

then it would be better that you need in network ecm1.61, which works much better than ecm2001 and definitely? also the drivers for your machine

[cicciogsr]

on a 1.3 do you do with a little of the driver

[msport (exil77grande)]

on a 1.3 do you do with a little of the driver

Gi? with those few maps that you can' do a thing discreet why? 1.3 mjet driver or no, and that has who knows? which power margin.

[cicciogsr]

the driver does not report all of the limiters and some maps that shows the ecm on some 70-75 hp are unpacked.. obviously based on what you want to achieve

[magi1984]

ok, but for a beginner you have the driver ? better than not having anything

[max75]

the truth is, I do not have a modified file to study it......I could make a thousand arguments to try to understand , but wants us to be , I also think a small base ,or vice versa a little help ...? how to find a needle in a haystack..I'm divendando blind..rightly drivers are not always accurate, however, almenno begin to see a little something...to recognize a few bends, etc.. etc

[max75]

I did a long search, but couldn't find it....

[msport (exil77grande)]

I did a long search, but couldn't find it....

to find what? you talk about the drivers for your map?
in case, mail the map that I'll take a look.

[max75]

the response was reported to magi1984 I thought that the network could trovatre ecm 1.61 but failed....I attach my file

[max75]

no aid......... not having the driver.....I don't know where to start......

[giarras]

no aid......... not having the driver.....I don't know where to start......

if you are happy with the one x ecm2001 and I'll make you happy.

[max75]

thanks giarras in that way, you may be satisfied with it I would be really grateful....at the moment I only have ecm2001 v6.3......

[max75]

for the version ecm titanium how could I recover it.....

[marcomjet]

you have to be a participant in the forum, or googla a lot I, for ecm titanium and map3d I have done so a long time ago.... but I think that's what the forum is slightly more complete

[max75]

how can I be a partaker......do all of my maximum availability......for the little that I know'.....

[max75]

thanks giarras....you know what....I discovered that the file was uquale what I had....strange....how I spegarono the driver doveve evere the last three digits uquali to this I had never tried.....indeed inialmente I tried with someone, but does not appeared to me nothing ...but now I have only du maps, injection zoned 1.....torque limiters...thanks

[max75]

hello I wanted to ask if with only these two maps .....I was able to get some results....to me, there are still other maps...still are not able to recognize them without a driver....or I accept any advice....to start incomincerei with the map pedal ? torque limiter ....you say that the result I get ..

[msport (exil77grande)]

below you will find the maps from the titanium with its graphics and their addresses with which it already, you can get great results if modified correctly:

map time of injection 08a1b4 to 08a4b0
injection f temperature air from 08f78a to 08f888 + cognate to follow
injection temperature correction air from 08f9ee to 08fb2c
limiter torque map1 from 084936 to 084944
limiter pair 1 from 08bda8 to 98ddb6 + cognate to follow
limiter pair 2 from 09045a to 09070 + similar to 090634 to 09064a
limiter torque 3 090eea to 090f06
to appeal the drivers are missing maps turbo,pressure limiter
with this you can start working.

[max75]

thanks msport but I have to change all of these maps to have some increase... the last I see

[msport (exil77grande)]

thanks msport but I have to change all of these maps to have some increase... the last I see

I would say that in order to have a base you have to start with these addresses.

[max75]

for the moment, thank you......... I'm putting all the good will...

[mistergame]

hi to all. I own a mercedes-benz c200cdi w203 automatic transmission 2005 122cv. I made it to remap some time ago. Now I bought the mpps I read the ecu and saved the file. I wanted to edit the file, and I downloaded ecm2001. When I go to search for the driver, I do not find it. Someone is giving me a hand?

[munro]

a council open one of your threads not "dirty" one of the other then they can? talk....

[msport (exil77grande)]

quoto munro open a post in the beginners section, and we give you a hand in the basis of the questions.

[max75]

hi I would like a information...can change the map view with a different program.. in case the addresses of the maps date from titanium are the same as seen with the ecm 2001 v6.3...

[admin]

hi I would like a information...can change the map view with a different program.. in case the addresses of the maps date from titanium are the same as seen with the ecm 2001 v6.3...

Wrapped those "drivers" of titanium are continuously updated with respect to ecm6.3 and stopped for a while but if you are a novice ecm6.3 it should be good to begin to understand something

[max75]

then if I open the ecm 6.3 ? I put the address of a given map with titanium can happen that the map will change.....? so, to be precise.

[msport (exil77grande)]

then if I open the ecm 6.3 ? I put the address of a given map with titanium can happen that the map will change.....? so, to be precise.

Then we clearly,if you open a file, and an email address? saw it in 2D you will find a map the same to the same email address? obviously the same file, you'll find him as well with the ecm or Map 3D, etc,the thing that might change from one sw to another may be the name and values of rpm and load that gives in tabular everything here.

[max75]

thanks msport for the explanation..? what I wanted to know...

[rego88]

expect.... do not do this to start with who knows how many things.... and not confondetegli the head.... do it start with the injectors opening times and the lim couple.... and let them know what is it, after that passed on to the pedal also xk? only with the driver that makes us'??? ? tt busted?? there are 3 torque limiters, which really? it ? only one... (with the kindred 2)

[msport (exil77grande)]

we are not starting with nothing I sol answered his question.

[mistergame]

I asked a question that is always inherent in the theme. For us beginners, it is perhaps the most easy-to-read tables that the 2d?

[msport (exil77grande)]

I asked a question that is always inherent in the theme. For us beginners, it is perhaps the most easy-to-read tables that the 2d?

let's say that it is easier to moddare in the grid than the 2d, but if we are talking about read then you have to do it in 2d.

[mistergame]

let's say that it is easier to moddare in the grid than the 2d, but if we are talking about read then you have to do it in 2d.

Then you can compare the two maps you must must do in 2d, and to know the addresses right?

[munro]

if you want to compare them to well and if the addresses are out of driver do I need to know the address, why? are marked by the sw, only the ones that are in the drivers...

[msport (exil77grande)]

Then you can compare the two maps you must must do in 2d, and to know the addresses right?


if you want to compare ori and mod with regard to the addresses you from the driver, you can make it in a table but if you want to do it in a complete,professional and see exactly all the difference between the two files, even in the areas not listed in the driver, you have to do it in 2d.

[mistergame]

but there is a sort of manual where you can better understand the graph in 2d because' so' and' very difficult. For example, I read a sort of manual of ecm2001. It seems very well done to map mode in the table. But as far as the 2d there is nothing around. Why not post a generic chart in 2d and explain step by step the various sectors?

[mistergame]

for example, I would like to start to compare my file ori with the mod files, but for me it is very difficult in 2d I am looking for a hand-step-by-step. For now, as the program I have only ecm2001.

[mistergame]

if you are up to it give me a small aiutini to begin to compare the two files. Then I have my ori (finally), and I have the mod file. You (msport) you told me that on the ecm 2001 there is a driver that is very close to my and the 449. Then starting from the beginning, I have to load the driver first and then the two files (ori and mod). At that point I go on the 2d, and I should veedere the differences between the two graphs overlap. Up to here we doremmo be.

[msport (exil77grande)]

if you are up to it give me a small aiutini to begin to compare the two files. Then I have my ori (finally), and I have the mod file. You (msport) you told me that on the ecm 2001 there is a driver that is very close to my and the 449. Then starting from the beginning, I have to load the driver first and then the two files (ori and mod). At that point I go on the 2d, and I should veedere the differences between the two graphs overlap. Up to here we doremmo be.

yeah,but you have found your file ori or are you using one of our data bank?

[mistergame]

finally found

[mistergame]

but on ecm2001 you must upload it to force the driver to then compare the two files?

[mistergame]

ok the files and drivers that are loaded. Now I go on the 2d, and I see the chart. The question is this. The addresses of the various sections where to find them? I have read in this post some addresses that you gave but are not clear to me.

[msport (exil77grande)]

finally found


could you post the file ori?

[msport (exil77grande)]

ok the files and drivers that are loaded. Now I go on the 2d, and I see the chart. The question is this. The addresses of the various sections where to find them? I have read in this post some addresses that you gave but are not clear to me.

if you look in the part of the winged central find sctitto address-dec-esa virtually scrolling through the file, you must reggiungere the various addresses that I have written but still in the initial page of the sw are already in the maps drop-down as the turbo,injection, etc.

[mistergame]

here is my file ori

[mistergame]

ok I have uploaded both my golds that my mdo with the driver 449. I went under pressure turbo and I open the 2d. I have a chart base and height. Height varies from 0 to 4100 and I think that's the nuer of revolutions of the engine. The base must be from 0 to 255, and I don't know what it is. In blue the file gold and red the mod file. Who can help me to interpret it? Scorrendolo tells me that these curves were increased by 4%. That means that the pressure of the turbine was increased by 4%? And' an increase in fixed 4%?

[mistergame]

the other question, but why in the graph of the pressure of the turbo curves up to 2300 and not up to 4000 rpm?

[mavaila1972]

below you will find the maps from the titanium with its graphics and their addresses with which it already, you can get great results if modified correctly:

map time of injection 08a1b4 to 08a4b0
injection f temperature air from 08f78a to 08f888 + cognate to follow
injection temperature correction air from 08f9ee to 08fb2c
limiter torque map1 from 084936 to 084944
limiter pair 1 from 08bda8 to 98ddb6 + cognate to follow
limiter pair 2 from 09045a to 09070 + similar to 090634 to 09064a
limiter torque 3 090eea to 090f06
to appeal the drivers are missing maps turbo,pressure limiter
with this you can start working.

I confirm already with these maps do a good job

[max75]

once the file is loaded golds I go in 2d graphics I enter the address in case the map time of injection 08a1b4 to 08a4b0....then to change in tebellare how it happens..there are successful....perhaps only having the driver has this feature!!!!!!

[mistergame]

unfortunately, to be able to understand something we want to force someone who gives you a minimum of explanations. Why open a file and see a graph does not take long and the rest....I epr example are pretty expert on engines, both for passion and to work. But I was in trouble already comparing my file ori and mod. I made some questions mah....

[max75]

I further reasoning....opening the file in 2d graphics then entering the address ,I select the portion of the map....up to here everything ok...then I think there should be a step change in tebellarre, or by entering the address I'm going to create a driver to be seen in the table, what do you think ? all of this possible?

[max75]

wonder if ?ra can edit in the grid not having drivers....because in the graphics for me ? still difficult....

[msport (exil77grande)]

wonder if ?ra can edit in the grid not having drivers....because in the graphics for me ? still difficult....

in the table, no drivers are not allowed to work but now after my pm, you should do it.

[msport (exil77grande)]

here is my file ori


this file is the same in all the files ori from me posted,then or did you wrong by posting my ori or your mapper was not your own, and sent you an ori compatible generic.