View The Full Version : Punto evo 1.3 6f3 read with v54
Good evening to all I would like to read the ecu of the punto evo that mounts to a control unit 6f3 only that when I go to open the folder from the punto evo in the cock, the 6f3 is not there... I think now I can read and write without problems by setting the cock as if to read a great point, but before doing so I ask you experts if this is doable or should be done in another method.
Thanks
read it as a great point...
The first version of the punto evo is the same.
perfect thank you! friendly
Have a good evening
if you read right on the casing of the control unit 6f3 you can read it with protocol great point!!
Done that myself a guilder with the same ecu and I can confirm that you have selected FIAT Grande Punto 1300mjt
There is the big point...I read it via obd by selecting Great Point
exact. And you save a reading in the bdm
guys but this ecu v54 the law entirely or is this just a virtual?? I have heard that even if you loaded a map mod to me always reads the ori. true??
The file read from the V54 serial by OBD is 2MB for FULL
guys but this ecu v54 the law entirely or is this just a virtual?? I have heard that even if you loaded a map mod to me always reads the ori. true??
The virtual reading on the clone does not work, so from the ID to recover the hw version and sw accordingly you go to retrieve a file ORI.
If, instead, read as a great point, you can read what there is in the ecu.
The virtual reading on the clone does not work, so from the ID to recover the hw version and sw accordingly you go to retrieve a file ORI.
If, instead, read as a great point, you can read what there is in the ecu.
Hello, it does not make confusion, the v54 has in its sw a set of files ori, making the ecu id, the sw checks to see if there is and you simulates a virtual read if it is not present, and says to read the ecu in BDM, the K..s has 2 functions both to provide you with the original file by ecu id and instead, if you read the file in the ecu, of course, your Ks...and should be provided with the package file ori.........
Speaking of cock, I mean the virtual reading does not work on the files in the db that there are no obvious.
Kess clone with db file ori still I haven't seen any...
Speaking of cock, I mean the virtual reading does not work on the files in the db that there are no obvious.
we down talked in the past that the db on their computers/res/gold was not updatable
Because the files were related to the instrument that he had read the ecu etc...
And also knowing the exact hierarchy with which they were appointed to the GOLDS, to Chk if I remember correctly, you could not add.
65 or a$ 400 always on their computers hack is based
Now I don't know if things have changed but you were of the same opinion here:
Now I don't know if things have changed but you were of the same opinion here:
If you upload this firmware here k09021102 in the place of the K10033818
Then comes the problem that need a reset for that fw k09xxxxxx
Have the cfg file for the update protocols etc...
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.