View The Full Version : various problems after deleting the dpf delta 1.6 mjt

giuseppe89

Hi guys, this morning I read in bdm ecu of my delta 1.6 mjt selectronic on what feedback various problems after the remap and delete the dpf and egr...Starting from the fact that I have done the job but it was done to me I don't know if it was really done all that well or not,let me explain better:

cinqueturbo

You say that the area's DTC has been erased, but I don't see anything abnormal except the map is made...
Of the 6 maps pedal were touched only 2 and this explains the reason that times go and other no... in addition to the other messes that have been made of course..

ugoboss

for how you made the map, I can confirm that the DTCS have been set to zero.

ugoboss

I forgot to say above, that, as usual, you ask an opinion on a changed file but not attached never the file ori, doesn't seem fair that one should look for the file gold to make you as a favor to you.

giuseppe89

I apologize ugoboss if not I have attached the original file but not having done the work, I'm not sure I have it,let me explain better on the other ecu that was used on my car and that I was then briccata they gave me on a cd the original file, which later proved to be anything but.later I attach the file that was given to me.As far as the dtc is sure that there are,I unplugged the middle harness with the machine in motion and will not turn on no light!much less errors in the memory...in the end, the map is made wrong then? Cinqueturbo messes what do you mean? Are related to the problem to the turbo which I have spoken, and I suspect? Thank you all for the time that I have dedicated!have a good day!

sportknight

giuseppe89

cinqueturbo

giuseppe89

Thanks cinqueturbo,putting gold in the area you described what I do in practice?I solve some problem I have?with regard to the map was already my intention to do as you described,starting from the ori and then try to make it myself.However, I need your help because I don't even know where to start...To put it back golds and exclude dpf and egr do I have to use the software?or do other stuff?there are guides that I can follow to do them in the manual?the ones that I have found I do not have the user rights to see them...I would then like to understand a little of how to start a map,on how to choose the quantity to be injected ,from the injection timing to change, and according to such calculations.I would like to studiarmela well to make a nice job.Look your straight in order to get to work and fix a little bit the thing.with regard to the trainer I can only tell you that "thanks" to him I realized that I had to try to do to me given the various disappointments received and it has motivated me so much up to bring me here!

giuseppe89

guys a question, the ecm does not find the drivers for my ecu what the driver you've opened the file?what is the most complete?I have noticed that is different but the driver its not there

egs

Also on the luca stanca is missing a little something...***** s, it does not find the ECM because there is, just open the file in 2d to see the maps.

cinqueturbo

guys a question, the ecm does not find the drivers for my ecu what the driver you've opened the file?what is the most complete?I have noticed that is different but the driver its not there

ECM is not there is the driver.. or the work in 2D or use winols..

that address and the area of the DTC that you have to put ori to review the errors in Diagnosis..

giuseppe89

I realized then I commend golds from that point at the end? Are not practical to do this questions also stupid

giuseppe89

In the database, the already present not add it..

ugoboss he's right I have revised the file.. put ori the area 1CBEDA...

however, the map, go magazine completely..

I self I were you, I wouldn't put Gold with EGR and DPF off and with the help of the forum the systems you..

and change trainer themselves, these are his files.. you Can always rely on the service the online file that it's worth it really when you have to make a good impression...
five turbo I tried to put the gold in the area you indicated, but something wrong,I selected the block from 1CBEDA until the end of the map of the map "ori" and I saved with "save the block" before saving the data and then saving increases.So, I have two files which, I believe, serve me the right data?I then closed the map ori, and opened the mod,I select the block from 1CBEDA at the end of the map and I click on load block and select the data.but when I go back to that address I do not see anything changed, I must confirm, in some way, or am I mistaken completely?I also tried copying the increases but nothing but I'm probably making only a mess.

ugoboss

this is your file with the DTC active.

giuseppe89

Thank you Ugo Saturday or Sunday, I'm going to write but where did I go wrong? It makes me appreciate so much the help that you give me but I'd like to be able, even by me

giuseppe89

Good evening to all,as the five turbo suggeritomi I copied from the original file block by 1CBEDA until the end of the map according to this procedure:

giuseppe89

Hello ugoboss overlaying your file to my known lots of differences...to my file I have copied only the block from 1CBEDA up to the end map (end map I mean the end of the 2d view) now I was wondering given that I am wrong for sure I in something where I toppato?probably not I have to copy everything, but to stop before?or you also have "adjusted" the other?I have not yet had the time to load it on the car,I hope to do that tomorrow.They are, however, curious to figure out what I did wrong

giuseppe89

Anyway, I wrote today the file with dtc ugoboss and everything works perfectly. Someone explain to me the dive I was wrong I? Thank you Ugo for the file in the meantime

Errecinque

Anyway, I wrote today the file with dtc ugoboss and everything works perfectly. Someone explain to me the dive I was wrong I? Thank you Ugo for the file in the meantime
The most common error that happens with the ecm when you paste the block copied is that you have to put the cursor exactly on the first green line to the left of the selection if you copy them to offset.

giuseppe89

thanks errecinque for the info I'll try again confronteròdi the two files