Exclusion EGR valve SID 202

[virus1976]

I ask for help in the forum for a problem with the egr valve of a Ford Focus 1.8 115hp with ecu Siemens Sid 202.
In practice, the car has the valve completely gone and replace it costs a fortune, I thought I would exclude it via sw.
I did a p? research and I found a range of addresses (0555A0 - 055646) very similar to those of the sid803/a.
Quanlcuno I can? say if I'm on the right track, or do a few little chapel in making this change.

the file ori is in the database of the forum

here is the link
https://www.professionalchiptuning.net/attachment.php?attachmentid=1025&d=1346863432

Thanks

[msport (exil77grande)]

if I'm not mistaken I had spoken and had arrived at the conclusion that the solution on the sid 202 or was it the 206 was fine as that of the sid 803 I think I don't want to be wrong, but you can try.

[virus1976]

Soul and courage I did the test loaded the map, the valve continues to operate, the minimum amount of diagnosis is 25% to 2000 rpm and it is closed.For? in the diagnosis are the following errors P1260 and P0606 but I have no light on before the change I had the malfunction indicator light engine on.
I wanted to ask if you draw a straight line on the maps egr should I close it permanently?

I read the discussinone on the sid 803 where it was said that it was similar on sid 206, since I am a newbie I still have a chance? to see the file posted


thanks Msport

[msport (exil77grande)]

Exact I was referring to that discussion, but with the Lina straight I don't think you solve even if in this case I would say test with this solution.

[giarras]

you test it, and we keep you informed.

[lumaracing]

virus1976 let us know if it's okay with the change with straight Line

[virus1976]

Made a p? test and I'll report:
first test :straight line on the egr valve and reset the panettone that I mentioned in the first post
will not turn on no light, the egr valve is only open to a minimum and to 10% as soon as you accelerate it closes, however, in diagnosis, I find the following errors P1260 and P0606

Second test: closing the valve to the straight line, and without modification of panettone
you acccende the MIL light the engine rises to over 3000 rpm, and the diagnosis is present, the malfunction egr and no other error. the valve is in the closed with the fixed rate to 4%

Third test: I pulled a straight line on the egr and changed the panettone not bringing them to zero, but at a minimum value, will not turn on no light always remain the errors P1260 P0606

I don't know pi? what to try if anyone has any ideas or suggestions I still have the car in hand.
thanks

[giarras]

and strange, I checked the codes that will diagnostic codes relating to the operation of the alarm system or in each case ? success in some vehicles, the following:

Cause

the PCM detected during an automatic control that has been detected by ir? 3 checksum incorrect.

[virus1976]

the errors have been read with a generic diagnosis I have the error codes according to the diagnosis correspond to "corrupted memory area data" and "corrupted ECU eeprom"

[giarras]

the errors have been read with a generic diagnosis I have the error codes according to the diagnosis correspond to "corrupted memory area data" and "corrupted ECU eeprom"

this ? the one that says ford:


P1260 - Ford
Type Powertrain - DTC-manufacturer controlled - Manufacturer Controlled
Description
Theft detected, vehicle immobilized) Conditions
Cause
The PCM received a signal from the anti-theft system that a condition of theft had occurred.


oh I forgot ..but the file ori there are these errors?

an error code P0601 means that a serial communication failed inside the computer at least 6 times.

[virus1976]

if I restore the original file, I have no error in diagnosis if you draw a straight line on the egr I get the error P0404

Thanks Giarras

[giarras]

if I restore the original file, I have no error in diagnosis if you draw a straight line on the egr I get the error P0404

Thanks Giarras

this instead ? an error on the egr..expect if any of you have had good results on this ecu maybe you can advise on the best.

[pinotec]

I believe that the right address of the file is this:
https://www.professionalchiptuning.net/attachment.php?attachmentid=1339&d=1349814878

anyway, are not the ones that have touched you the maps egr

[virus1976]

thanks Pinotec for the information, but I don't have access to the discussion why? I have a few post

[pinotuning]

sorry guys can you help me to disable the egr on a ford focus 1.8 with ecu siemens sid 202
here is the file ori

[motorsport]

hello pino here is closing the egr off...pw in pm!!:)

[pinotuning]

thank you very much motorsport
you are a great !!!

[magi1984]

no password on the annexes guys. If you want to help, do it up at the bottom of sharing with all. If msport, I and others put it, but the password to each of our attachment file to the forum would be very

[motorsport]

magi I saw that there are attachments with a pw that you have to ask msport,so I did...if you want I can put without pw,move it into a protected area,for me no problem!! ;)

[motorsport]

thank you very much motorsport
you are a great !!!
anything if I can help I do it willingly!!! ;)

[magi1984]

if you like you can do it yourself, open a post in the section off-limits, there are already? several guides for egr edc15,16,17, and sid

[motorsport]

ok magi now I enter in the area off limits!! thanks

[magi1984]

thank you for the help

[pinotuning]

thanks guys for the collaboration !

[msport (exil77grande)]

magi I saw that there are attachments with a pw that you have to ask msport,so I did...if you want I can put without pw,move it into a protected area,for me no problem!! ;)


hello,thank you for the contribution, but as you explained the magi we have an area off-limits, where to put these file types, but everything that we post them without a pass,the pass put in the links that anyone could download,in addition, the area off-limits, is not accessible to all.

[mavaila1972]

hello,thank you for the contribution, but as you explained the magi we have an area off-limits, where to put these file types, but everything that we post them without a pass,the pass put in the links that anyone could download,in addition, the area off-limits, is not accessible to all.

Sorry girls that credentials you need to have in order to have access to the area off limits?
thanks

[msport (exil77grande)]

Sorry girls that credentials you need to have in order to have access to the area off limits?
thanks

if you're not aware there would also be the pm.

[mavaila1972]

if you're not aware there would also be the pm.

the cio? tell me how I must do,
thanks

[msport (exil77grande)]

the cio? tell me how I must do,
thanks


I'm sorry you kidding me or write seriously?
do you know what are the pm?

[mavaila1972]

I'm sorry you kidding me or write seriously?
do you know what are the pm?

pm is a private message,I just wanted to know how to proceed and just wanted to understand what he wanted to say the area off limits.
thanks and sorry

[msport (exil77grande)]

I just wanted to tell you that for certain questions, you can send us a private message for the zone, off-limits, means an area that is not accessible to all.

[Sergiouu]

I need egroff in ford 1.8 SID202. Help me please!7751

[Sergiouu]

Who can help?

[spike]

Hello! Prompt for which program to edit the firmware? And edit the line to disable the EGR?