skizzo93
hello guys,I would like to make a mappetta that is accurate enough to squeeze my car(alfa gt 1.9 150cv with downpipe,center silencer sports,final, muted sport,bmc air filter,reinforced clutch with a flywheel which is lightened).
I bought time ago a map by a so-called remapper online, but the map also if it goes well enough, it's not ideal as many who have viewed have said to me for what I was looking for.
my goal was to make a map, that would give me a way to take advantage of the stuff I ride and squeeze the turbine the original before the next step, or turbo plus IC on the front(tubes IC aluminum them montero in the short term. Speaking with many rimappatori and preparatory, with turbo of the series, without sbragarlo in a long time, have told me that they can get increases of 40\45cv and 70\80nm of torque. Sincerely, I say to you that I would not like, SINCE WHEN IS it POSSIBLE to throw the file purchased, but trying to improve it. I hope that this discussion can be a good starting point for many.
Let's talk about a edc16c39 HW 0281012883 SW 1037379006.
I enclose my file ori + map purchased + a small review done by me. The thing that maybe by the first of the eye(in my review) is the map of the geometry is decreased;the change I made for not to piccare the turbine before I piccava also at 1,850 by marcie high. now stop 1.6, gradually descending to 1.5\1.450 bar. I hope that the discussion will be followed by many users, so as to make unabella is also a guide for all those wishing to get their hands on so much widespread edc16c39 mounted on the many jtd in circulation.
Thanks a lot to all.
I bought time ago a map by a so-called remapper online, but the map also if it goes well enough, it's not ideal as many who have viewed have said to me for what I was looking for.
my goal was to make a map, that would give me a way to take advantage of the stuff I ride and squeeze the turbine the original before the next step, or turbo plus IC on the front(tubes IC aluminum them montero in the short term. Speaking with many rimappatori and preparatory, with turbo of the series, without sbragarlo in a long time, have told me that they can get increases of 40\45cv and 70\80nm of torque. Sincerely, I say to you that I would not like, SINCE WHEN IS it POSSIBLE to throw the file purchased, but trying to improve it. I hope that this discussion can be a good starting point for many.
Let's talk about a edc16c39 HW 0281012883 SW 1037379006.
I enclose my file ori + map purchased + a small review done by me. The thing that maybe by the first of the eye(in my review) is the map of the geometry is decreased;the change I made for not to piccare the turbine before I piccava also at 1,850 by marcie high. now stop 1.6, gradually descending to 1.5\1.450 bar. I hope that the discussion will be followed by many users, so as to make unabella is also a guide for all those wishing to get their hands on so much widespread edc16c39 mounted on the many jtd in circulation.
Thanks a lot to all.