View The Full Version : you can update the fw 3.009 of the kess v2 clone
hi guys I use a kess v2.10 clone with fw 3.009 I wanted to ask if it was possible to update the fw, and if possible how to do it thanks a lot
Hello, I don't know if you have experience and equipment to do it yourself, but you f? both upgrade hw and sw.....search for info in the forum and things will be more? chiare..........
Thanks so much passion for engines, I try to give a look..but a friend of mine has just reported that Milan c ? his cousin, who is only in this for the programmers..cio? makes them very similar to the original so much more? reliable with cost definitely supported..? now I consider why? I honestly do not want to combine any damage to hw
hello all, I have the KESS V2 ( C. ) v. 2.06 and aqggiornato to 2.08 fw 3.099. I happened to plug it in when the pc was connected to, and then had to reset the sw and the fw folder, including TF SD card. When I connected everything I should have aggionato, I'm not active all models/engines, of what is due, and if possible know how to fix this problem. thanks in advance.
John hello, I try to move to the sd card inside the slot on those clones has a lot more game..or replace the sd card with a 2giga because usually the clones can fit in the 128k..if you don't want to change the sd and keep the one you formattala in all the ways that you can find in the drop-down list of course, reformatting to last with 32fat..you do these tests, I solved so
thanks ciccio x the prompt reply, I did both tests with the sd card that to reformat it in other formats. the SD and 2 gb.
it is possible that the TF folder in the sd card has some problem or the file missing? if installassi the fw 4.036 not solve the problem? thanks
Yes I have updated the fw to 4.036 is copied to the folder tf affixed to the fw on the sd card and everything is as smooth as oil
It may also be that the files inside the sd card is corrupted for any reason...even if you already have queen-sizee now your initial post and I have to say that connecting the kess the pc while it is connected to the Internet, what's most likely to happen and that you scratch the nxp of kess
Thus, sn is fried, or I still have some possibility to solve it with the same fw or 4.036?
Already I would try first to move the sd card from the slot, keeping in mind that the clones dance a little, go to tests. Open the kess lever of the sd card insert it once again to close the slot and shoot the whole back are the displacements of a few millimeters, so you need to do several tests, however, each time you do it try to start the kess and see what happens. If all of the tests should not be lever the sd formattala and copy on the 4 folders contained in the folder tf..if not it's not even so you have to unsolder the nxp and replace it and do the rework of all the sw..of course all the link operations kess Pc the you have to do always with the internet disconnected and also the various antivirus detached..
Already but when you connect the kess does not give you any error code or something else ???
good morning and good Sunday, did the tests but nothing, I would like to attach the images but does not see the files on the site. I located another doubt before thinking to NXP, the TF folder. ec network to download it to see if I have corrupt files?
no, no mistake, for this I have doubts that it is locked. I tried to look for a fw 3.099, or 4.036 including the folder TF in the network, and I can't find anything :(
hi to all, it is true that the clone kess v2 is a change to the internal components to make it more effective
hi to all, it is true that the clone kess v2 is a change to the internal components to make it more effective
it is a basic do it if you want to work with a bit of tranquility.
I read on the net that replacing the components works like the original. If anyone knows which are the components with codes if possible, post them on this discussion so as to understand where to be welded and which is the advantage to damage. thanks gio'
can you tell me how do you edit components because they are willing to buy one to Ugo bos
but what is the difference with the firmware up to date?
the one who sold me the kess said that there were difference
the machine park and the same
and some of the machines in most of the is only the original
can you tell me how do you edit components because they are willing to buy one to Ugo bos
I'm sorry, but I don't have the file with the list and location of components to be replaced, I believe that if you look carefully you find.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.