cut file

[iaio92]

hi guys,
maybe I ask a stupid question, but how the f? to cut a file from 2 Mb to 1Mb to be able to write with mpps??

thanks a lot

[tezzero]

why? the have to cut?????

[iaio92]

why? I have to write with mpps

[giarras]

procedure:

1.opening ecm
2.utilities
3.conversions
4.cut/paste file
5.the file is loaded from 2mb to be cut
6.check the box defined by the user
7.in the end box, enter 0FFFFF
8.save

[mecdoc]

I cut them I often used winhex or HxD are more practical

[audi sp]

I mec.. easy and intuitive

[iaio92]

I mec.. easy and intuitive

I used kla procedure giarras and it works.. thanks a lot..

[tezzero]

Sorry for the stupid answer, but I use a pc with a provisional with a low resolution and on the video screen I could not see with mpps :eek:

[dvdtuning]

Thanks giarras, info, very useful to the forum!

[ago27]

sorry, but because you need to cut a file to write it with mpps???? I with the cock 1260 write it without cutting anything. boooo

[andrew64]

obvious mpps does not write the file to 2 mb, and you have to reduce it to 1 mb with the procedure indicated by giarras

[ecuboost]

but really I write quietly file 2 mb with mpps, I believe that mpps do not write the backup made with the bdm that reads the entire contents of the control unit, for qst you have to cut them.

[giarras]

but really I write quietly file 2 mb with mpps, I believe that mpps do not write the backup made with the bdm that reads the entire contents of the control unit, for qst you have to cut them.

you write, " quietly the file is 2 mb, but the marelli 1.3 mjtd from 75hp and 90 hp that are 2 mb with mpps, you can't write them down you have to cut them as per procedure.

[ecuboost]

sorry I have written safely to a edc16c39 2 mb, and an apple I have to write again,qst point I wonder why?

[giarras]

sorry I have written safely to a edc16c39 2 mb, and an apple I have to write again,qst point I wonder why?

read!!!! above, edc16c39 no problem read 2mb and re-enter, marelli 75hp and 90 hp you have the file 2mb cuts from 1mb only with mpps
I hope now it is clear to you.

[ecuboost]

in fact, since before you spoke in general terms of the 2 mb

[msport (exil77grande)]

in fact, since before you spoke in general terms of the 2 mb

yes, but the 1.3 mjet is not edc16c39 but marelli then I do not think the same thing even if both files are originally from 2m.

[g14nluc4]

You can use winhex

[mecdoc]

???????????????????????
I cut them I often used winhex or HxD are more practical

[giarras]

???????????????????????

? a hex editor.

[sno74]

I cut them I often used winhex or HxD are more practical
you can put the signs as he did giarras cos? then others might try..........

[bicio]

but guys with a hex editor just cut it in the meta right.
and use the first half true??????

[giarras]

you can put the signs as he did giarras cos? then others might try..........

but the method by me posted seems to be difficult? I complicated the life....

[sno74]

It is true, I think it is difficult, I wanted to know if I have to cut a file that is read from ep2 bdm in this case better to use hxd

[Danny]

I Giarras, in the end ? fast, and practical....I do not understand why? of the many worries...

[Emanuele54]

Hello,
I wanted to know, if for? after cutting it I have to reiincollare something, if s? what?
or I can write the file in the ecu, and with any programmer?

Thanks

[ecuboost]

you should only cut if you have to write with mpps, and not c'? need to paste anything

[pabloescobar]

Hello giarras I was wondering but if you have to bring back gold from 2Mb explain to me please how the f?.

Hello and thanks

[pinotuning]

Hello giarras I was wondering but if you have to bring back gold from 2Mb explain to me please how the f?.

Hello and thanks
when you cut the file is to create a new file from 1mb then the original 2mb remains intact !!

[pinotuning]

I would add one thing that maybe some people don't know !! if you have the software Dataexplorer manager 6.5
open it and look for the function called "split file" , upload your file to 2mb
and will be cut exactly in half ;);)

[giarras]

in fact, if you cut earlier, and saved to 1 mb , you will also have to 2 mb.

[Emanuele54]

It is ok but I will have to? change that to 1mega, I think, and then it will have to? bring it back to 2mega to rewrite it.....? this is what we do not understand!


As I carry the original size?

Thanks

[ecuboost]

No, if you write with mpps, you have to write the 1 meg if you dont write with mpps, you need to edit and write the 2

[Emanuele54]

...............aaaaaaa I know!


for? a question....the other day I read a GPabarth first series me7.... with galloV2 and gave me a file 869Kb and change it with Titanium, I first cut and led to 832Kb, now, if I were to write it, I can write one to 832Kb or before I have to riallungarlo?
and if YES, how and with what do I have to riallungare?

Thanks

[Backgroop]

With Mpps the file is to be cut only for the ecu marelli Mjt versions 75 90 hp, while for the old mjt 6jf, and 6f3 70cv can be written and read quietly.. the cock 1260 only does the 70cv mjt 6jf, and 6f3 in k-line, while with mpps do all versions are marelli mjt2 75 and 90 hp engine you can only write to the file properly cut but not to read it..

[max75]

with mpps versions marelli 75/90 hp the file 2mb should be cut to a 1mb to be written....I always recommend a backup......mpps wrapped ago misfiring.

[mafani]

No, if you write with mpps, you have to write the 1 meg if you dont write with mpps, you need to edit and write the 2

hello ecuboost but I wanted to say the file is 2 mb depends on which instrument you must write

[igor]

sorry I long time ago I had a problem with a Gpunto 75hp and loaded the map with mpps you ? locked the ecu, for the cut, I used the method described by Giarrasma something did not work and the car would not start more?,there ? gi? happened to you?
to reset the ecu I had to bring the car to a friend of mine that bdm has rewritten with a file of gold that had him and the machine ? shared
could you tell me why

[igor]

unfortunately, I have tried but I do not have more? files for you to see I'm sorry

[pinotuning]

sorry I long time ago I had a problem with a Gpunto 75hp and loaded the map with mpps you ? locked the ecu, for the cut, I used the method described by Giarrasma something did not work and the car would not start more?,there ? gi? happened to you?
to reset the ecu I had to bring the car to a friend of mine that bdm has rewritten with a file of gold that had him and the machine ? shared
could you tell me why??
the method that you gave Giarras ? correct !! if the ecu is ? planted the reasons may be many ! for example, your hardware quality is poor or
the voltage of the battery ? dropped below 11 volts or the computer unstable/clogged etc.....

[igor]

I can tell you that the battery was charged 12.3 V and the pc has no problems, for the hw I can't guarantee why? after that experience I didn't do ir? used, the guy who sold it to me said he used it and never had a problem, but ? however, the word of one who tries to sell you something and then not? how reliable
my friend who I have arranged the casino said that it had been written a wrong part of the unit and not explained to me, nothing else

[Xtreme0303]

guys sorry ecu maybe not sar? have but computer enough....but in that mega that size...what'????

[macday]

I read a Lancia y 1.3 mjtd 75hp with galletto 2 via serial port and it gave me a file from 2.5 mega,as for us, let us take it to the 2 mega?
thanks
Marelli
Multijet
MJD6F3HW03T
Num SW: 3454Y266
Dis FIAT: 51806503
Cod OMO: 6F3.Y247
bed with gallo v2 size 2.5 mb

[msport (exil77grande)]

I read a Lancia y 1.3 mjtd 75hp with galletto 2 via serial port and it gave me a file from 2.5 mega,as for us, let us take it to the 2 mega?
thanks
Marelli
Multijet
MJD6F3HW03T
Num SW: 3454Y266
Dis FIAT: 51806503
Cod OMO: 6F3.Y247
bed with gallo v2 size 2.5 mb

if you use the search to find the solutions.

[panterargento]

Sorry, before writing these marelli (75-90), the mod should be made before or after you cut it? In short, we must make it onto the file from 1mb or 2mb and then cut?
Thanks.

[Backgroop]

Hello panther the changes to the file, you can do both before and after, the cut is not independent of the parties intetessate..

[panterargento]

Ok, thanks a 1000 Backgoop, it was the last question I had about it.