Problem zaffira

[freddyecu]

Hi all, I have a problem Opel zaffira the machine will not run and in the diagnosis battery voltage low... of course the battery and fully charged can you tell me what can? be ? Thank you in advance

[overbooster]

in the parameters the ecu that the voltage detect?check the power supply and the masses start x

[freddyecu]

I have to check the pins on the ecu? That measured on the battery ? correct... For Mass do you mean the pins on the connector or chassis ground? If I put a direct cable between the negative and the carcassaecu might be useful ? Thank you in advance

[overbooster]

You take a wiring diagram and start checking the power supply and the masses,rel?, fuses. Diagnosis of as ? the voltage to the Ecu?

[freddyecu]

The voltage that the d? in the real-time data and about 6 v

[overbooster]

Do the controls that you'll find something that should not be

[freddyecu]

Someone pointed me to the ecu faulty ? can? Or ? to exclude, and the failure ? puramentente to plant , rel? fuses masses wiring...

[obd75]

what type of ecu we talk about diesel or petrol.

[sno74]

Check the mass usually ? that is not good on zaffira.............

[freddyecu]

? a diesel with ecu edc 16 c9 .. X mass the big one that connects the frame to the battery?

[obd75]

I have not had any of these defects on the zafira, for? if colleagues have indicated to the masses, you should check them directly on the comb ecu

[overbooster]

news?? have you solved it?

[franco-electr]

the voltage of unpacking can be an error of diagnosis

[costa68]

Hello, quoto the colleague Franco, happened other times, that if the protocol is not correct, the parameters that give the numbers.
The car does not start, but the battery do you feel it turn cheerful? the diagnosis detects dtc? in the parameters see the engine rpm and pressures in the starter?

[franco-electr]

I would try with another diagnosis , but that controller port?

[zullo]

I would try with another diagnosis , but that controller port?


ecu edc 16 c9 ...