IMMO off on 59M HW010 for a monster 620 Sie -02

[aristonas]

Hi,

I'm cerchando to delete the IMMO from my ecu. M620-02 with IAW59m HW010

Send the file to abstract from the ecu with MPPS in a few days.

Sorry for my English, I learned by myself (DIY version?....)

I have a few questions that I hope to have clarified:

* If not I can write The changed file on my 59m : is it possible to make the pair from a 59F (fiat) that is low cost? (30-40 ?)
what would be the model of ecu marelli most adapted for this work.

Then, I bought a mpps 13.02 and also a mpps16 with the cables. And can read in the content from the units with this software?
I have the cia retained the JPdiag on the bike, then the communication works, I can reset the TPS, please see The data etc etc..
Now I hope I have the chance? to read the contents of the memory of the IAW59M to remove the IMMO. (crusciotto broken, which is not managed with the humidit? the Swedish).

If someone delete the IMMO, what is the best way to replace the crusciotto (offtopic)? A KOSO? Original used , another monster/Classic etc?

Many thanks in advance,

George The Greek.

[aristonas]

Hi,

echo The extracted file today with Mpps from my ECU.

What cercho and a version without IMMO.

Many thanks and Greetings!

George The Greek

[aristonas]

And even if c'? the version of DP, with the immo off, it would be even better....
Thank You Very Much.

[aristonas]

Echo the file open in TunerPro.
9389
I'm looking for the area where there is the configuration IMMO. And someone who wants to help?
They told me that the Lambda1 and the one for the IMMO , and true?
Also the file .xdf that I have used.

[biela]

But you can?t use an xdf from another bike.
The Addresses are different.

[aristonas]

Thanks for your answer, Biela

True, True
The maps though seem pretty aligned
Injection, injection vertical, between these two (sportclassic 1000 and my little monster620, both iaw59m)
All I really need is the address/address for the immo off.
And then write it to the file via some checksum calculation (next problem).

//George The Greek

[biela]

I do not know the address for the off immo.
I'm also looking for.
Sorry

[maurof650]

Hi,

echo The extracted file today with Mpps from my ECU.

What cercho and a version without IMMO.

Many thanks and Greetings!

George The Greek

If the admins allow me can I disable the immo, and attach the map file in immooff

[aristonas]

Then it would be great!

I also try the address for the calibration of the speedo. Now I am going to 60 km and the speedo says 100 km...

Many Thanks

[aristonas]

0x3a15a
Or
0x3d2d5

probably the 0x3a15a


Greetings.

[duke]

there is a casino of messages you do one thing as he said mauro attach the file ori you need to disabbilitare the immo and if the admin give permission you doing it, and will post it with due pass. ok then if you don't make it, I will give you a help me greetings

[aristonas]

0x3a15a
I found I laid.
Now work in the Immo off.
Greetings.

[albertoS4]

Hello all,
I am new to the forum, my name is Alberto and I have a S4R.
the ecu is a 59M hw010. I would like to do immo off but the address that says aristonas is 00 in my case. How can I do? I have put FF (a value of clear for a lease)? I can try to postravi my file (I don't know if I can do it)? Do you have any suggestions?

Greetings

[aristonas]

Hello alberto
Send me your file, please, and I'll see what there is
Gs*ariston.nu
Giorgiogreco.

[aristonas]

Hello alberto
Send me your file, please, and I'll see what there is
Gs*ariston.nu
Giorgiogreco.

[aristonas]

Hello alberto
Send me your file, please, and I'll see what there is
Gs at ariston.nu
Giorgiogreco.

[albertoS4]

Posted right now...thanks

[simone73]

for monster 620, the address above is correct. byte 01 right 00 immo off!!! tested it today and funzionana.

[albertoS4]

I had tried it on the 916, at that address, there is 01 but another value... I fixed the address but the address of the 916 is different

[simone73]

it is possible to know its position?? not you, I'm coming! never could be useful, but more for trying to understand how to locate it.

[max40]

Hi to all .. interesting this topic and a little weird !! that to me is usually the iaw59f you scodificano from the eprom inside, and not from the map file or flasks .. in this case if I have well understood, instead, just put a bit set to 00 from the file the flasks for immo off !! you provatoa do it with iaw59f decode ' how does the scodifica ?

[max40]

ok maybe I understood is 59M and non-59f !! maybe the 59M are different, and in this case you can do it from the file, the flasks !!!

[simone73]

no I personally have not tried it, but it made the 620 I also found that of the 900 monster. it is a little bit moved but looking at the file immediately.trano he did saw my lack of knowledge, but it works!!