Replacement ecu Opel zaffira

[freddyecu]

Hello to all dv replace the control unit for a Opel astra 19 cdti number ecu 0281 01 2 549 to burglary I found a 0281 014 452. Always a zaffira you know if it can? go well or are they different? Of course it has to be riverginata... thank You in advance

[clabsport]

Sapphire or Astra? Here's a discussion already? open. Anyway, should always be inserted all the data of the vehicle and used the "search" button.

https://www.professionalchiptuning.net/archive/index.php?t-7180.html

[freddyecu]

? a zaffira 1.9 with code 0281012549 to burglary year available 0281014452 always a zaffira 1.9 the same engine, I wanted to ask you if they are the same or different both cars have the same horsepower 120, and the same features, only changes the number of the ecu thank you in advance

[tecnoracing]

are not compatible with the 0281014452 and a edc16c39 5.12 meltre the other, and one ecc16c9-3.12, therefore, are not compatible

[gianni1001]

Hello freddy
I know for curiosity? that problem is the ECU?

[freddyecu]

And not damaged ? recognized it from the obd it from bdm

[gianni1001]

Ah ok
But how are you ? success?

[blackwolf76]

You can not riverginarla... that should be adapted with a diagnostic tool in the official opel. At the limit, if you can read it in the bdm you have to clone it.

[gianni1001]

But if I read in BDMtrasferisco also the key code.?

[blackwolf76]

Yes of course, just transfer the full Bdm on new and create a perfect clone of your.

However, as far as I know the ecu, being quite prone to breakage, Opel, give overhauled around 500 euro.

[gianni1001]

Six apologize in advance but I have found a topic, and I'm intruding...
I too have had a problem doing just The id of the ecu, and unfortunately it came to my attention too late at my expense that ? a control unit cursed...
But not being able to prove that it's not ? was my fault....
Referring to BlackWolf instead, I wanted to ask you if this speech of the clone by reading the full bdm applies x all the ecu? Type
If I had to do a Siemens Sid 203 of a Discovery 3, 2009?

[blackwolf76]

If the control units to ****llo hardware are the same, the clone, of course you do all copying on the replacement flash eprom, which means that there? that reads the Bdm, where possible. Otherwise, it acts the unsoldering and soldering.

[gianni1001]

Thanks a lot
Friendly