Doubt edc16c35

[silven]

Bmw 320 Mot 204D4 Bosch Edc 16C35 I have this drive to do the next week, I read the file via obd with kess I have to do it in speed? sicch? I have not read through the bdm as I usually do on these... now I have a doubt...in the unlikely event that something goes wrong in writing with the file that is read in serial I can restore it in the bdm? or it takes me to read his. Graziee

[ugoboss]

the speed, let her alone on these, (but also on all the other) with the file that is read on the serial line does not restore the flash, and find the original to do a restore ? easy in the bmw, even with sw and hw the same you can find different files, it all depends on the cks.

[obd75]

always go on the safe side.........
I'm on these ecu that I don't happen every day I read bdm even if I have a read of the other car where all the IDS match.
then s? make 1000 readings bdm and not block a in serial, you venture directly on the serial line and go in the block.

[silven]

I forgot to say that I have done is the partial reading that total with the kess (even if the files are equal in size) at the end not to risk too open? the sak. but, in theory, the total read that makes the kess should not be the same as the bdm? I insist with this thing to understand, even at the end of the study in the possibility?.. it may come in useful to someone...

[amen]

I have blocked a equal time ago, shooting in the bdm file of another car with the same numbers and diagnosis inpa for alignment, if no he didn't.

[passion engines]

Hello, these cars are sensitive to rewrite by obd, gi? the house mother uses specific equipment to keep the tensions around 14 V, the file read by obd both partial and total in lock step, we do a little, even why? you should have the capacity? to rebuild the file, after this is always the address of immo that prevents you from starting the car, read and write in BDM and work more? quiet.......

[silven]

Of these I did the other 3 only that I had read in bdm ,even if I've written in the obd without problem,on this car not having the time to open the center. (in the pi? the customer ? picky does not want to open...) I wanted to understand if the reading total is made by kess was the same as that made in the bdm will be pararmi the cu+or I unfortunately, the other times I have not done is test... I was reading in the bdm for safety and then I was working serial, to understand had to which I did a reading for total obd and then comparing, for this if someone maybe has done is test could be useful...

[msport (exil77grande)]

reading between the bdm and the serial on these ecu is not the same.

[alfa147jtdm]

not only on these. See Opel for example.

[silven]

[dangy]

considering that this is a very fair response

[dangy]

considering that this is a very fair response