Sign in

View The Full Version : problem fiat600 turns bad



Alessio93
17-01-2015, 13:25

Alessio93
17-01-2015, 13:26


I forgot how the control unit is mounted on a magneti marelli 4af hw204

dariuccio
17-01-2015, 13:37
check the hose of the pressure sensor

Alfiuccio
17-01-2015, 13:43
manifold pressure how much is it?

Alessio93
17-01-2015, 15:15
gated pipe pressure right , is a flood of white smoke, thanks for the reply

dariuccio
17-01-2015, 21:00
then eat the oil, the spark plugs as they come out?
? for the case of the fire engine?

frantik3
17-01-2015, 21:29
the injector according to the cylinder!!!!!!!!!!

beppe.c
18-01-2015, 02:04
you have blown the head gasket.

clabsport
18-01-2015, 02:18
But to the coil as it is? The machine consumes water? The first to manifest the symptom permanent in the morning started at three and then go well?

ugoboss
18-01-2015, 12:04
if it smokes white, or ? oil or water, you have measured the compression?

Alessio93
19-01-2015, 11:18

dariuccio
19-01-2015, 12:10
I bet that a candle has a different color from the other

beppe.c
19-01-2015, 14:16
the ecu???mmm that defect can have!!!white smoke!!mmmmmm if it does not burn well the gas the smoke ? black(white smoke=oil or water in the form of steam)alessio I will give an explanation how an ecu can' to make white smoke?

filetuning
19-01-2015, 14:21
But in the diagnosis of that error are???? I ? happened something very similar situation to yours, and it was the water in the tank, I realized why? the inlet pipe of the gasoline was perforated, and when it rained load of water

Alessio93
20-01-2015, 00:03
So guys was just as I thought I did test with oscilloscope on the injector n2 and I vistoche the wave shown on the screen was ziglinata compared to the other afternoon I went to the break I took the ecu, the scodificata and the machine is a wonder. the white smoke that seemed to be burning oil was caused by one of the two probes that tomorrow you will try? to see what? and I hope to complete it so I feel better and I know thanks to all

beppe.c
20-01-2015, 00:12
So guys was just as I thought I did test with oscilloscope on the injector n2 and I vistoche the wave shown on the screen was ziglinata compared to the other afternoon I went to the break I took the ecu, the scodificata and the machine is a wonder. the white smoke that seemed to be burning oil was caused by one of the two probes that tomorrow you will try? to see what? and I hope to complete it so I feel better and I know thanks to all
noe was oil and what was it?what does' the probe to make the white smoke?could you explain it to me I do not understand what it can achieve.

Alessio93
20-01-2015, 15:29


ps.thanks to you all for your helpfulness