Rexton XDI 2700 2004

[the lp.47]

Hi I have purchased this car in 2011 and on the occasion of the replacement of the clutch (140.000 Km!!!) I asked the mechanic to give them a little bit more? sprint, was very slow. He did do and ? become a real bomb with a single defect, if you do gas up at the bottom of a fault, it lights up the check on the dashboard. At the beginning, shortly after you died, but now it stays on, and lately I had to go to a car electrician who play on the ecu to get it to reset at the modest cost of 10?. I wonder: do they not ? that file makes me ruin the turbine? On the occasion of the cleaning of the injectors, and the pompista told me that the pressure at the intercooler was of 1.8 atm. What do you advise me to do? Thanks in advance and sorry if I said some nonsense.

[dariuccio]

maybe the map have raised too much, the pressure of the turbo

[legendaryslave]

The pressure of the turbo in this car ? managed by the ecu, I play with the head that goes in the failure to fuel pressure high

[dariuccio]

if ? as you say I said a castroneria!!!

[legendaryslave]

if ? as you say I said a castroneria!!!

my not ? absolutely not a criticism towards you , I say that ? the pressure of the rail why me ? 've done tests on this management and how to increase a bit the peak and go over the 1600 bar size or turn on the light

[the lp.47]

What do you advise me to do?

I buy a ELM 327 + smartphone I think I will be able to remove the alarm to the framework. But the thing I'm not passionate about anything, why? I think that if it goes into alarm c'? something that should not be.

[legendaryslave]

First post the dtc that jumps out then post ori and mod should be arranged the map definitely

[dariuccio]

my not ? absolutely not a criticism towards you
god forbid, I consider you a

[the lp.47]

O. K. the error I can post it, as soon as I get the tool, for the rest I have nothing, no? ori n? mod, I did it and I don't know who to ask, as I said in the first post I have done by a mechanic on the occasion of the breaking of the clutch, but it is 500 miles from me ( I was on vacation ) in the province of Modena.

[dariuccio]

controls the pressure of the rail with the elm

[cinqueturbo]

O. K. the error I can post it, as soon as I get the tool, for the rest I have nothing, no? ori n? mod, I did it and I don't know who to ask, as I said in the first post I have done by a mechanic on the occasion of the breaking of the clutch, but it is 500 miles from me ( I was on vacation ) in the province of Modena.

What part Of Italy are you from?
Maybe on the forum you will find a villager who can? help.

[the lp.47]

Dress in Fontana Liri, in the province of Frosinone.

[cinqueturbo]

Dress in Fontana Liri, in the province of Frosinone.

Well I'm in the 150-160Km..
See s? someone more? near you next..

[the lp.47]

Thanks cinqueturbo, while to resolve 160 I do them willingly. Hello

Hi, today I handed in the Elm. I have done several tests but could not connect with the Ecu, I think that the clone does not ? compatible with the ecu. A few tips? Thanks

I forgot to say that I have used Torque 1.8.49 in addition to those supplied with the Elm and a Note 2.

[dvdtuning]

Hi lp.47 I am Sora, if you want to walk and give it a look together

[the lp.47]

Thank you. How do I find? Let me know. Hello

[cinqueturbo]

Hi lp.47 I am Sora, if you want to walk and give it a look together


Thank you. How do I find? Let me know. Hello

Now that you are in good hands ;)

[dvdtuning]

Look, in theory, I can't give you a contact why? prohibited by the regulation, then you have to ask at isola del liri shop "future electronics". The more of this I can tell you I'm sorry.

[msport (exil77grande)]

Look, in theory, I can't give you a contact why? prohibited by the regulation, then you have to ask at isola del liri shop "future electronics". The more of this I can tell you I'm sorry.