Kess V2...and now what do I do with it?

[everyname]

Thanks!

[ake85]

Meanwhile, he began to get help on the official website alientech and you will see every single component to what you need! however, from the photos you have everything you need...
The jlink ? the tool for resetting of the scriptures of the kess
Then you have the tool to read in boot to connect to the kess
12 volt power supply
The cable to read in k-line or line can

[everyname]

Installed the sw original, has created a folder 'Help' with 4 rows, then I downloaded another folder 'Help' 280 Mb with several files that contain the various instructions. Question, these help files are displayed when I select a car? (Now I don't have the equipment on hand and I can not try).

For the links, tell me if you are on the right track:
The Kess ? the box on the pi? great that I connect from one side to the pc, and the other to one of these 3 cables: one ? the cable to the OBD output to the line-k (for use with wire to the blue); the other 2 wires are the ones at the bottom, but in which cases are to be used (especially the one in the bottom right with the switch)?

The tool to read in the boot to connect to the kess ? the box on the pi? (bottom left) which is connected to the power supply and the cable to the terminals (top left)? With this module I boot tricore?

[ake85]

When you load the help file of the times you will find pictures and other times no, I happen to find them, but it was the kess follows you step by step and ? a pleasure to use

the tool in the boot ? what is to be connected to kess ( which must be connected to the jack 12 bravo)

for the jlink I have put the image

[everyname]

only 15..? but I still have a lot of other! :D
Thanks 1000 for the info :)

[everyname]

A question vital...the module to read in the boot which voltage should be supplied? In the kit there? a power supply but only the cable.

[MarcoDJ]

Since we're here, a question I.....
the blue wire that is on the cable to the OBD when v? used, and how and why?????
Thanks!!!!!

[everyname]

Since we're here, a question I.....
the blue wire that is on the cable to the OBD when v? used, and how and why?????
Thanks!!!!!

That is to be inserted on the connector that comes from the obdii cable and should be connected directly to the edge of the K-line that comes from the ecu, only in some cases where you are unable to read through the OBD.

[MarcoDJ]

Thanks!!!!

[racanacci]

hi in case you need to reprogram the kessv2, the balance of the band, we attack the j-link... and then? as I open two icons of the sw j-link?
resp thanks

[ugoboss]

hi in case you need to reprogram the kessv2, the balance of the band, we attack the j-link... and then? as I open two icons of the sw j-link?
resp thanks

usually together with the tool they give you the sw and also a movie where they make you see how to reprogram it.

[ugoboss]

look into the various folders that you have given with the tool and you will see that there is also a video that explains how to reprogram it.

[racanacci]

perfect, thank you then var? know ;)

[racanacci]

here is the process broken... 9297
? ever happened to anyone?

[ugoboss]

you have selected good entries in the program for your processor?

[racanacci]

of course, I also went to read it several times over the processor... nxp lpc2478

[bimmer]

if you need a hand let me know )

[ake85]

when it fails the connection secure pin strip that are not welded well, or cold solder, I know that no I have reprogrammed many

[mobilservice]

Hello, I apologize if I go, may I know how much this toy and where could I buy it? Thanks

[ugoboss]

go on ******type in the name and you will open a world where you will find prices and whatever.

[mobilservice]

Thank you so much ugoboss, really? my question had a retro thought and now let me explain: I was wondering where to buy it simply to be directed by you, the professionals from a reliable one.

[ugoboss]

I'm sorry but I don't advertise to anyone, I'll just tell that they are all made in china, then some of them are modified in hw to make them more secure and stable in the transmission data, and, of course, cost a little more, the total security as I always say there is no maybe, no, not with the tools golds then.......to the limit take one in china and then you can always change it, even here on the forum ec people who are doing it, just that spulci in the discussions dedicated to this tool, as I said above I won't name names, but the work is good, we say, that has a great....... passion.

[mobilservice]

Very professional, you are a great.

[bimmer]

from experience, I say to you that in china there are at least 4 factories kess only one of which works decently!

[mobilservice]

And how do you know which one ? the right one?

[bimmer]

normally in the small cd provided with the kess find an explanatory video