View The Full Version : Galletto, v. 53 - solution win7 win8 win mobile and eng language
Hi guys, as the title in search of a solution to install the controller on win...
Thanks
passion engines
21-11-2014, 18:24
Hello, ? from the time you ? fixed to the tool for win xp-seven , on win 8 I never tried to not think of myself as a sw from the pc for this use.....
Hello, ? from the time you ? fixed to the tool for win xp-seven , on win 8 I never tried to not think of myself as a sw from the pc for this use.....
'll give me directions please?
among other things, I'm having problems of stability? on xp, why? as soon as I install some new program I have to reprogram the v. 53. Do you have a better software?
passion engines
22-11-2014, 00:00
My advice, and that remains: a lot depends on the pc used, on some pcs, if on the same partition of the hdd you are using different driver ftdi type diagnosis or other tools often create conflict, and then to stay quiet, where c? this tool does not charge any other, then the sw that comes to you and impestato from the famous lpk.dll prior to using it in another pc, do the cleaning with anti-virus once scompattatti all the rar files, just that they left out one and at the first chance they get infected your pc, making it unstable, then you will need a pc performance not a minimum of 2 Gb of ram and at least a dual-core "Ghz, the sw would prefer Intel processors, if you use win 7 disable user control, for the sw to make it work well, there are dll mod version xp, and version win 7.I will stop here seen that yet and I haven't been allowed to proceed as from past discussions.....In my profile c? my contact..........
My advice, and that remains: a lot depends on the pc used, on some pcs, if on the same partition of the hdd you are using different driver ftdi type diagnosis or other tools often create conflict, and then to stay quiet, where c? this tool does not charge any other, then the sw that comes to you and impestato from the famous lpk.dll prior to using it in another pc, do the cleaning with anti-virus once scompattatti all the rar files, just that they left out one and at the first chance they get infected your pc, making it unstable, then you will need a pc performance not a minimum of 2 Gb of ram and at least a dual-core "Ghz, the sw would prefer Intel processors, if you use win 7 disable user control, for the sw to make it work well, there are dll mod version xp, and version win 7.I will stop here seen that yet and I haven't been allowed to proceed as from past discussions.....In my profile c? my contact..........
Why? should you problems? You are posting a solution for all users. If you put this here, do a favor to all...Skype does not use it, you have *****?
passion engines
22-11-2014, 11:48
hello what you find in the profile ? the way to contact me...........
passion engines
24-11-2014, 13:59
Four, on which operating system you want to run the tool????
Four, on which operating system you want to run the tool????
I have to do it turn on the pi? computer with operating system xp, vista, 7, and 8... I need to get it working on the pi? computer
Why? should you problems? You are posting a solution for all users. If you put this here, do a favor to all...Skype does not use it, you have *****?
I do not think a solution is open to all.
I do not think a solution is open to all.
Why?... ..?
Why?... ..?
because I think that is selling the solution, and not free and open to all.
passion engines
25-11-2014, 14:09
I explained to the Four that on xp and win 7 I can help you, and on 8 I've never tried, such as gi? explained above, for each user, and a pc only ? free, but since then c? who the f? the sly and in the past has asked me to 10 reg. I would just like to offer una.......... I think it's clear the message.......
because I think that is selling the solution, and not free and open to all.
Excuse my ingenuit?, but I thought they were news free....I had not thought of this circumstance, and then I would like to see just rivendermi the crack.....hahahahah
Passion, thanks a lot, but given the instability? v. 53 and the problems that are on the pc, every so often, if not a few times too often, are to be formatted, I thought I was able to get the sw to the serial... that's all.. why? I have a pc with xp that will have? format soon, why? starts fussing, and one with 7 that I would like to prepare.... Then do it or you do if you want to help me...
thanks
passion engines
25-11-2014, 20:58
Four a confirmation of what I have explained to you, perhaps you have confused views from your info that you have on the tool you're out of the way, currently the v53 ? best of the v54 and if you know how to moddarlo becomes the miogliore of its category. As promised, these are for win 7
after these files requires the activation right?
passion engines
25-11-2014, 21:57
after these files requires the activation right? exact but we must first eliminate wi.bu and lpk.dll
exact but first you need to delete wi.bu and lpk.dll
But if in time I had to format and reinstall, the serial ? a payment?...And the price?
passion engines
26-11-2014, 11:43
once you have your reg. and you save it you can use it on that pc, but not on others.............
this? you're telling me that with my reg then I can format and reinstall on the same pc as many times as I want?
passion engines
26-11-2014, 13:52
it is exactly..........
not me I find it the most?...you have the sw to remove all wi.bu and lpk.dll?
passion engines
26-11-2014, 21:00
But let me understand with all my heart I want to help you seen that those who received help did not speak, but we are at the stone age? we are talking about eliminate.....delete 2 files from the software folder, just select them and delete...........I do understand if you are in these ****lli with the pc as you intend to continue?
But let me understand with all my heart I want to help you seen that those who received help did not speak, but we are at the stone age? we are talking about eliminate.....delete 2 files from the software folder, just select them and delete...........I do understand if you are in these ****lli with the pc as you intend to continue?
I can understand pc and how!...Maybe I explained evil..***** o the sw ? the combofix....it does a good cleaning... ;-D
passion engines
26-11-2014, 23:13
I f? pleasure , it takes 5 minutes to fix the sw of the tool and then you know, since you are expert on pc lpk.dll the will also in the rar file.........I recommend you first to clean it up well in the sw, and after passing it on the pc that should work, otherwise it remains only to format...........
But let me understand with all my heart I want to help you seen that those who received help did not speak, but we are at the stone age? we are talking about eliminate.....delete 2 files from the software folder, just select them and delete...........I do understand if you are in these ****lli with the pc as you intend to continue?
great passion engines ;-)
I f? pleasure , it takes 5 minutes to fix the sw of the tool and then you know, since you are expert on pc lpk.dll the will also in the rar file.........I recommend you first to clean it up well in the sw, and after passing it on the pc that should work, otherwise it remains only to format...........
ok...now I download the folder of the rooster and the new dll you posted on the pc....then??
passion engines
27-11-2014, 14:26
great passion for engines ;-) Thanks Ugoboss
passion engines
27-11-2014, 14:28
ok...now I download the folder of the rooster and the new dll that you posted on the pc....then?? and then bastva read above: install the driver of the tool, from the folder of the sw eliminate wi.bu and lpk and titi out of the rar the 2 files that I have passed, and position them in the folder of the sw, flip the sw and will generate an id for the write to a txt file and places
and then bastva read above: install the driver of the tool, from the folder of the sw eliminate wi.bu and the lpk and the titi out from the rar the 2 files that I have passed and position them in the folder of the sw, flip the sw and will generate an id for the write to a txt file and places
done...I can not install the drivers for the device. The hw when I connect it excites you because? I hear the click, but not to be
if I start the sw asks me to install ftd2xx.dll
passion engines
27-11-2014, 18:36
if you read the entire discussion, the pc needs to be cleaned, if you had other tools or drivers installed first had to delete them, towards the 20 since you have my **** and skype still doesn't install with teamviewer, you'll fix me, make sure that your pc ? in order and that the dll you have to put in the folder of the sw of the tool you need to remove from the folder, and delete the user account control in win 7
andrew64
27-11-2014, 20:50
hi passion engines also I would like to install the v53 on win7, following the discussion I arrived at my hw id
that ? the following id: 0058-2515-4B73-AC92-67A8-3919-281A-816F
if you kindly could you give me the solution ?
thanks andrew
passion engines
27-11-2014, 21:31
here is andrew64 this ? your unpack it
passion engines
28-11-2014, 17:34
For Andrew64 have you solved it ? does it work? For Four finally found peace, problem solved...............
andrew64
28-11-2014, 19:57
I have a problem still to solve, let me explain the software on a regular basis I do id and identifies the ecu, I read the reading begins, and after the 5% goes into error thing with xp is not the case at the moment, I don't understand the why?
andrew
passion engines
28-11-2014, 23:30
you do one thing, first go to user accounts and set the control to zero, and then go in the settings and delete the attenuation screen, make your pc always active, then win 7 ? 32 0 64-bit? and you need at least 4Gb of ram for win 7, and 3 for xp let me know..........
andrew64
29-11-2014, 21:27
using win7 ultimate 32-bit with 2 gb of ram and xp 32-bit with 1.5 gb ram which works well up to now
I have done various tests with win7 but nothing usually only error that now makes me the 10% of reading, both in the can and in k
andrew64
30-11-2014, 20:44
a passion for engines
solved the problem I added the file lpk.dll of 103kb and it works perfectly with win7
fact id ecu more reading and work where the first failed
thanks to the passion engines
andrew
passion engines
01-12-2014, 00:35
this makes me happy
Four, on which operating system you want to run the tool????
Thanks you have been very kind and professional
puntospeed1.3
23-03-2015, 16:13
hello to all. I'm trying to work on ilv53 clone on a hp notebook with windows 8.1
processor 2.16 ghz
2.0 gb ram
64bit.
everything installed the driver, device, always detected, the date changed.
get to the point that I open eobd and attacks, and then detach the relay and is flashing the freccietta as if he wanted to leave, sometimes it's the message of the renwal.
To install the drivers etc I followed the instructions that are in the network of Fgthec for win8, there is written that is not certified, but I have learned that some are risuciti, abroad
on xp it worked fine. does anyone know something to try?
I only have a lpk.dll 113 in the folder Fgtech
passion engines
23-03-2015, 21:06
watch that on win 8 I never made reference to the seen, which in my opinion do not consider it reliable for work, for leisure and hobby ok, if you have a chance? change S. O. and install a version of Win 7 pro is 32 Bit or 64 Bit
andrew64
06-04-2015, 15:28
hi passionemotori
I wanted to try with the regkey on xp if it worked my id 0058-12D0-44DD-0E82-0480-7150-8BEA-8BD0
many thanks
passion engines
08-04-2015, 21:39
hi passionemotori
I wanted to try with the regkey on xp if it worked my id 0058-12D0-44DD-0E82-0480-7150-8BEA-8BD0
many thanks
hello, if you have the dll for win 7 on xp does not work you need the right dll
andrew64
09-04-2015, 09:35
Ok .thanks where can I find the DLL right on XP, why? ? the system that I use on a pi?
andrew64
09-05-2015, 23:32
hi passionemotore are forced to ask you for the activation
for my bad luck the pc that I was using is broken and I'm trying to reinstall the one that I had on another pc and I need the activation code if id me the calculations ?
thank you for the patience and cooperation that you offer
andrew64
andrew64
10-05-2015, 11:10
to the attention of passionemotore I apologize if I break
I hope that you believe me but now I can't use fgtech v53 with my new pc, why should I format and install xp anyway my id : 0058-4e4b-0c6f-04b7-e687-2c9b-e411-a410 I would be grateful if I forniresti the activation .
passion engines
10-05-2015, 15:32
9463 here is the dll for xp now you turn the reg.key
passion engines
10-05-2015, 15:36
9464per andrew64 here you go..........
andrew64
10-05-2015, 21:08
thanks passionemotore
when I start fgtech I get this info( windows vista or above detected making a second patch)
but then out in the open, I have not yet tried to read a few cars quindin I don't know if it works
andrew64
10-05-2015, 21:10
as operating system I have win7
passion engines
11-05-2015, 12:02
then just use the reg.key
passion engines
11-05-2015, 12:04
if you use win 7 ? normal exit........
andrew64
11-05-2015, 12:53
In spite of give me this info that I never had before, it seems to work
let? further tests and you do? know
andrew64
17-05-2015, 09:26
sorry again but I have a small problem I had to format the pc and change the hd, and when I added the regkey in fgtech this does not work and gives me a new id
0058-4e4b-0c6f-04b7-e687-2c9b-e411-a410 how can I do?
andrew64
18-05-2015, 07:59
? hard to believe but puljtroppo happen to me everything and more? with these .damn notebook I hope not to the applicants on the reg. Given chehoslo this tool
andrew64
19-05-2015, 09:54
Hello passion engine are in trouble with the wing without the reg file because I am cursed pc ml has changed the id, perhaps because of the new hd and increase the memory if you can and if you want to re-enable regkey
passion engines
19-05-2015, 12:28
Hello passion engine are in trouble with the wing without the reg file because I am cursed pc ml has changed the id, perhaps because of the new hd and increase the memory if you can and if you want to re-enable regkey a question I wanted to ask you, but the files from the rar decompress it and put it in the folder of the sw, where there are the dlls ?
andrew64
19-05-2015, 12:42
It is exactly but before that. I would change the HD was working now nothing to me .a new id
andrew64
20-05-2015, 12:24
Decomprimo the file and add the DLL but I think the problem is the change the hardware id changed why? replaced HD and increased the memory
passion engines
22-05-2015, 00:14
I can not download the win7 evo.rar posted by passion for engines, to use my v53 on win7 32bit
andrew64
03-06-2015, 06:18
I invite you to read the rules and you will find the answer why? can't download the file
passion engines
03-06-2015, 16:48
passion engines
04-06-2015, 00:40
Thanks.
But ? true that deleting wibu.dll and doing the recording you can? even download updates from the tool fgtech_update?
passion engines
04-06-2015, 10:44
Thanks.
According to me no, but there are things that you read around....
passion engines
08-06-2015, 00:54
According to me no, but there are things that you read around....and are things that can create a lot of troubles.......
I ? built the doubt and also read the help content in the V53, where they say that they enable the internet connection and tap on renewall and Download to update.
But I am afraid I have taken the help of the original.
Guys I need advice,I purchased a new notebook with Windows8 do you know if in some way you can operate the galletto v54? Or do I have to force things to Windows7?
Should run even on 8 V54, updates are not discussed.
so I should install it with the software for 7?someone who has done tests on this?then I would like to understand one thing,both on 7 and on 8 after you have installed the software, I have always turned off antivirus and internet connection or do I have to do it only when I use the software?
Better not to have propio antivirus software.
The V53 on win8 I see it very hard
Mine is a v54 not v53...tomorrow I will make an attempt I hope for the best!if someone has info about it I'd be so grateful ☺
win8 already has problems of his own to work well, I ruled out right from the pc if you have to use interfaces clone.
Thanks ugoboss then step to Windows7 or advise me directly to xp? For now I only have the rooster, then later I would like to take other interfaces.
win7 home premium is fine.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.