power supply ktag is equal to the bdm 100?

[alfonsoh]

Hello, I accquistato a ktag, on the inside for? missing the power supply.
Do you know if ? equal to that of the bdm 100? looking at the pictures ? equal and has as output 2A.
I am a beginner, do you know if ? always need to use the power supply for a read / write?

[alfonsoh]

If a write-in ktag I lose the power, and it crashes, I can save it by rewriting the backup?

[motorsport]

hello,the resume,so you have to use power adapter!!

[alfonsoh]

have you had issues with the almentatore supplied? I heard on some sites that it would be better to a power supply with at least 3 To output, and that the one supplied on certain control units do not work well. Among other things, some people say that ? best to take a stablilizzato and that the 0.5 amp output is sufficient for all control units. I need a third your opinion, not s? where to find one and that is going well.

[frantik3]

3a and go safe

[lupo1]

0.5 To are a misery!! as said Frantik3 go with the 3RD and you're clear!

[alfonsoh]

also I thought the same thing, are just a few of 0.5, but for stabilized are the super*****laconloscappellamentoadestra right? I think that goes well into mobile phones, it just has to be 3 amps max output right +-1%?

[lupo1]

Be those of mobile 3RD not come to us manco with the binoculars... If you want to be sure you get a 12V stabilized by 3-4A, cost around 50euro, even less. Then, if you have the budget get the adjustable back is always useful. Stabilized means that if you must provide 12V not throw out 8 or 15, but 12. My advice ? not to never skimp on power supply, then everyone does what he believes in.

[eismann]

You don't have an old pc thrown away somewhere!? The switching supply inside of the pc is very good for this type of application, outputs perfectly stable, and quite a bit of current! Not less than 10A!!

[sportknight]

put an external power supply good stabilized,the ones supplied to me were blocking the edc17 fortunately recover easily...

[carlo abarth]

if you want to work with serenity and buy a good stabilized power supply ....money well spent!!

[Khendal]

A link you can post about which power supply to buy and use?
Thanks :)