View The Full Version : Feature
Emanuele54
31-10-2014, 08:13
Hello all,
I ? happened to pi? once disabling the FAP with the car I would return after some time with clogging problems to the above. Now I would understand if time excludes only the regeneration!!! but not the operation of the FAP!!! here I have to intervene with the switch ( which I pray to whoever is able to make a nice guide for complete exclusion, and therefore I believe that in this way, the differential pressure sensor would be excluded.
I confirm?
Thanks
time does not work well on dpf forget it, ? better to do one swicth off. or you can contact the forum team ? go 100% secure
Emanuele54
31-10-2014, 13:15
Do you have examples of the switch-off? I was a neophyte, I'd write a guide. Thanks
carlo abarth
31-10-2014, 13:30
ec the group with a total spending of editing will help you...!!
you precisely you spend na bullshit for the file, and maybe you're right with the swicth off if some probe you goes out then the light comes on and you always have to remove the dtc.
and is' true' but, this is not obvious even to pave all of the dtc is 0.
for my experience the 1.3 mjet (all) and the 2.0 mjet is 140 170 hp time makes them very well, provided that they allow themselves to be attached to the probes, because something must read... on the 2.0 mjet when you fap and egr with time you pull on a bit of the torque limiter as if to counteract the loss in the low to you once you have emptied the fap
Matty23p
20-11-2014, 19:35
Time works well the anke on the 1.9 Mjet 150 hp, the only thing there and a bit from this just (that time is not set to 0), if your not on all the ecu is doing by clogging 1000% x? not ? or the failure recovery. Topic already? the treaty on the forum if you are looking for, you'll find him ;)
Alfiuccio
20-11-2014, 20:28
not all of the 1.3 mjet works....
Guys time does not work. On edc16c39 fiat works, but smoothes out all of the dtc. For the future not ? absolutely a
Thing well done
Certainly not will work? in an optimal manner..... you should always take a look at the map to see what is really going to touch you.. I redo the account also ? novice becomes difficult to make the check if it has worked well!! but I on the mjet edc16c39 I have not had problems, it takes away some of the dtc in most this ? true
time with luca stanca works on bmw 3 series 163cv edc16 c35 or makes a mess?
159sportwagon
29-11-2014, 18:39
2 days ago I tried a immo off on a alfa 159 edc16c39 and not to work .
No on bmw edc16c35 time does not work. Gi? I tried. You return the car with the car being in recovery ? error
Fap clogged.
bmw 3 series 163 and 177 hp works well or does stupid things and have to do the switch off? frazie
I have gi? answered I. On the 163 that has the ecu edc16c35 does not work. On this ecu does not Switch off but the emulation
That time is not good. Instead, on the 177 that ? edc17 is the Switch pero on this with time, I've never tried
lupeen90
28-01-2015, 18:02
raga then again not ? reliable?
I would like to close the egr and luca stanca alfa 147! l you have tested?
the engines mjet with regard to the fap ecusafe works well, for the egr I don't know'
msport (exil77grande)
30-01-2015, 12:27
the engines mjet with regard to the fap ecusafe works well, for the egr I don't know'
ecusafe does the egr even if there is written and then it's about time.
can anyone tell me if a time works well on engines mjet 1300 marelli control unit?
sorry, but I meant to say if it works well for both egr fap. sorry if I have not expressed well.
sportknight
02-02-2015, 09:50
can anyone tell me if a time works well on engines mjet 1300 marelli control unit?
sometimes they go, sometimes no,you have to risk
No on bmw edc16c35 time does not work. Gi? I tried. You return the car with the car being in recovery ? error
Fap clogged.
But you deleted the fap.... I made a long time ago (about three months..) up to now it has no problem,now I have to make another we will see...
legendaryslave
02-02-2015, 14:13
Poor machines processed with this soft but according to you, the professionals we spend a pit of money when the c'? the time it does not free this system ruin in addition the car also made the firms and the workers of the sector, which is so then once the customer has risparmito the sound when it comes from me, desperate to get out and fix the casino
Poor machines processed with this soft but according to you, the professionals we spend a pit of money when the c'? the time it does not free this system ruin in addition the car also made the firms and the workers of the sector, which is so then once the customer has risparmito the sound when it comes from me, desperate to get out and fix the casino
Dear legendaryslave you who are professional ir? what else to say.... you know who you're talking to..... guy I have a workshop for 35 year I did the delta integral and the sierra cosworth when you perhaps you were in elementary school ... (view the et? signature) I do not want to say the name so as not to create any mess, but I can say that my cars have won the Italian championship of rally and then die down and then I just responded to a question and I said my, let's say the truth? these software use them all, then logically they are like the diagnosis you must know how to read and interpret them and know, for? if you reply, so a priori I have the doubt...it's good that you have to defend the parish, but a bit of umilt? never hurts.... (ps.no hard feelings...no reply? to any replies... on this fact I have already? said it all)
legendaryslave
02-02-2015, 22:21
Dear legendaryslave you who are professional ir? what else to say.... you know who you're talking to..... guy I have a workshop for 35 year I did the delta integral and the sierra cosworth when you perhaps you were in elementary school ... (view the et? signature) I do not want to say the name so as not to create any mess, but I can say that my cars have won the Italian championship of rally and then die down and then I just responded to a question and I said my, let's say the truth? these software use them all, then logically they are like the diagnosis you must know how to read and interpret them and know, for? if you reply, so a priori I have the doubt...it's good that you have to defend the parish, but a bit of umilt? never hurts.... (ps.no hard feelings...no reply? to any replies... on this fact I have already? said it all)
I don't refer to anyone in particular, I am not a person that says they know everything and be able to do everything that is bothering me, and that I are at the door kids with a cock and a version of the ecm and I get to say I here I when I had to spend 400 thousand euro to equip a workshop with professional products and up to date and of a certain ****llo and metture all to norna, and to ****llo legal, that's why I can't do a luca stanca or a map with 2 pocket money because we pay taxes on my work, and the customer tells me the guy under the house to me for 50 euro.
I say that, unfortunately, if you want to work on certain ****lli is not good to rely on the time and if you happen edc17c46 with adblue that make the meal at the time ? I have to go play it safe and stand out from the mass to the quality of the work,the same thing if you're referring to an engine that do use the keys that the damage found on the car or you are going to buy a cart professional, this is my speech .
silven does not offend me in the slightest of your critical because any opinion and well accepted in my comparisons are an open person who always accept advice
Unfortunately, the problem of the maps at 50 euro and professionalism? in the work in general ? a worm that does not sconfigger? never here in italy,just think of all the work in black that c'? under our work (think of who is a mechanic or other.... at home in the evening) users maybe to save 100 euros on a distribution of an audi turn to these ... not knowing then what the risk ( I've seen things... beginning to see the loss of oil or water, let stand why? they do not have the part and the equipment to do so, they must finish the job that night ... back and forth.... both the customer and what's that?... after a couple of months out of the problem they think it is another thing... and they say it is the machine always has a... not knowing that the blame and who has done the work,the important thing was to save...) to blame anyway ? always of those who rely on these people for (thinking..) you save while you do the work ,then in the case of maps, the lack of experience-cognition not ? the problem of "time" if he does a good job of defappare that maybe it does... and all the rest that are in the map on the hand that does damage.
One thing I would advise you when you are these customers do not have to "play" you have to make you pay just for what you put in the field... your weapon must be to arrive where the others have toppato... I am having a lot of satisfaction in this time of crisis... people that I haven't seen pi? for years they have returned... but not I'm playing,if they are returned they were "played"... and is returning the pass-the-word (not blah that went on in these last times) traits good one (I mean work and honesty? I won't give away..) and you get other two...
racanacci
03-02-2015, 18:50
hi I have read your answers, I understood that from time to time ? a program that is not too professional, and I wondered if it is a good thing to start with this software to get, initially in my car a ford focus tdci 115hp 2005, I believe that the mountains siemens.... or look for something more serious
I ask you from beginner to advise me
thanks Mark
alfa147jtdm
04-02-2015, 18:54
Time is good for the kids. We hope to use it more? often so we put in place the damage.
then say the time ? "a hoax"? strange, if they do pay-by-weight of ro to do stupid things, I did not know, convinced that a programmer in those ****mem it doesn't go to crap.
racanacci
05-02-2015, 08:24
who knows in the practical test, what results they can give?
My modest experience with time ? been positive the issues I have had at least about the car that I did the only thing according to me ? that ? standardised in the sense that the example in the edc 16 with a driver that makes all the pu? happen maybe with numbers of different hardware and software on the same drive in the control unit change something and maybe not to lever something, or moving something that was not to be moved,and in that case unfortunately it does not work well, and then replaces the experience of seeing where he toppato and put a remedy to hand...
has anyone ever defappato with time citroen c5 2000 hdi 140 hp delphy dcm 3.4? doing stupid things?
Engine83
22-02-2015, 01:37
I honestly do not know if there is an official version, for? on some cars it works, and I do not speak as a boy by a prostitute for the past 50€ :-)
I don't do many of the fap, but for the little that I have tried, on fiat group takes away a bang of robba, in the end good or bad, the walking machines, in my opinion, on the 1.3 mjet is not working well, the group psa 1.6 110cv edc16 the machine back in recoveri, and you have to activate the dtc, on the psa siemens sid does not work, on psa 2.0 edc15c2 until today I have never gone back, on edc17 vag does not work on bmw edc17 engine 177cv the car behaves in an unusual way :-) maybe I wrong something or I have a version in bad condition, but this is my personal experience.
Engine83
22-02-2015, 01:38
I forgot, mercedes e280 cdi e320cdi with edc16 the car will not start :-)
racanacci
22-02-2015, 12:52
thank you for the info..:D I'll try to look at some of the map ori tomorrow...
Hello. on the edc16c34 110cv just remains mod only 2 post injection, and the byt swich and 6 dplace you can see in the diagnosis: change the filter to 100000km ,on the vag edc17 cp14 ,20 works.
Engine83
22-02-2015, 23:33
to me on the vag cp14 has had problems, then I was handed a file *******h, and the machine has not given more? failure, with the time I lit the glow plugs, and entered in protection
I would like to understand one thing that I do not ? clear, you say that time is the great casini, ok. the program will have developed a dozen engineers, computer and electronic products, you know a lot more then. why? do not try to solve the bug of this program then?
racanacci
03-03-2015, 08:13
we rely on experience of the practical problems, or experiences in the practical test... engineers are not always effective on all...
someone has never tried it on audi a4 siemens ppd1.2 170 hp?
it is good but if you understand something of the ecu look at the changes you make in 2d in the 90% off all the read dtcs and then if it breaks something else you won't see no light........
what version are we there yet?
works on nissan qashqai 1500 dci?
no,you have to do it by hand
Guys my delta 1.6 mjt cn edc16c 39 from when I was defappata no longer has the reporting of the dtc,this is a consequence of time or does it happen also in other cases? (Luca stanca and the egr off at the time, I did it and I wanted to understand in practice if there is a limit of the person who did the operation or this ecu has no other way to do this? )
you know, it works on cebtraline simos pcr 2.1 engine 1600 tdi polo and golf?
simos pcr 2.1 even there is on the list,you have to do it by hand ;)
that you know works to rule out the dpf on the mercedes vito 2200 80 kw edc16 c2?
that you know time able to close the egr on edc16 c35 bmw x5 3000 d 218 hp? can someone post some screenshots?
do not use Time or CarSoftware to delete the DPF EGR and DPF,deleted the 50% of the functionality,the rest should then be sought from the map with the related DTC
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.