error alarm kessv2 clone

[setor]

Hi to all, as the title of the kess pulls out this error when I try to read the ecu of a renault megane 2 1.5 dci 74 kw-100 hp system delphi.....
? success already? to someone?

Thanks in advance

[magi1984]

error alarm means that you have selected the method of communication wrong, the cio? what makes you choose k-line or can. if you choose kline and you from the failure of the alarm you had to use the CAN

[setor]

But it's not giving me 2 options....

[setor]

But it's not giving me 2 options....
I can not select the can or k line does it all automatically....

[raffaell0]

*setor? A question, when you attacked the kess to the obd, and tried to read from or write to,the voltage of the laptop, where l ?have you plugged in?

[explode82]

you see that there are more? protocols for the ecu for delphi, you are likely to have wrong to select the protocol of reading for the ecu

[setor]

The laptop was powered by network...
And I have tried all of the available protocols

[legendaryslave]

increases the voltage of the battery

[raffaell0]

Ok.I thought that had to do with voltage issues. To the extent not orig. And always a p? sensitive to these questions.
2?:
You have welded the socket, and written to the file and removed the Token?
in the case of you, there are network solutions, how you can fix them, that part of the cleaning of the contacts of the Sd memory card, to rewrite a patch that fixes the problem. I don't think that there are other solutions other than those mentioned