Alfa 147 Q2 moddified map, reaches just 190km/h

[Pittatore]

Hi guys,
I have a question regarding my friends 147 Q2, after remap that he had on it, the car want go more than 190km/h and the fuel consuption is too hi, up to 12l.
Anybody generous to look at the map and tell me whats wrong?
Ori and mod file are in the attachment

[sergiot]

remapped file is made very bad.
about 95% of your modification are out of range, means that the range modificated are not interested during normal driving of the car.
and if driver is not driving with accelerator full floor , car is 100% as production.
very soft and not necessary the modfications of pressure common rail.

[Pittatore]

Thanks allot, I will try to reduce rail pressure.
Im thinking about also to reduce the injection maps for 10% and duration map, but what confuses me is that the turbo pressure is increased just a little bit.
Any suggestions about reducing?

[Pittatore]

Edit:
Could it be that the fuel consuption came from this huge torque limiters combined with a huge rail pressure?

[sergiot]

fuel consumption is not affected by any of your modifications.
may be is increased only because you are driving fast and strong searching for performance hard to find.
max speed is not increased because you don't drive in the points you have changed
fuel pressure return standard.
injection map is good increase value but extend more wide the increment
turbo is not bad

[Pittatore]

Ok i will lower the rail pressure to the standard, injection map will wightend through the whole table.
Max speed is affected by what map? I saw that the max speed limiter is left as standard 299,99.