Reading edc16c9 opel with ktag and writing with kessv2

[rodcraft86]

guys I open this post to ask for information, to read the complete c9 opel I know that ? need to go to bdm, but to write you can? also use the kess v2? let me explain, I see that the kess has enabled only the writing but ? able to write the complete file or just a part?

[explode82]

in my experience having both tools in gold,you can easily do the read with ktag, and then writing a serial with kess,does everything as it should ;)

[rodcraft86]

[ake85]

today I got kess and ktag and I'm curious to provarl, as soon as I have time to put them? to the test...do you have any tips in particular to give? thanks for any response

[explode82]

nothing to say, are very intuitive and explain everything with the spoon, trying you will see ;)

[fabiovts88]

guys without having to open the other post I wanted to ask I have a kess v2 clone I have to write a edc15c7 of a fiat multipla I can do it easily I not? is generally written from the obd port?

[ake85]

nothing to say, are very intuitive and explain everything with the spoon, trying you will see ;)



p.s. for the rest I have to say that I am very satisfied with both kess that of the ktag

[michele30]

hello you tell me what it takes to make this mod of the scriptures?
I attach the guide complet aper please?

[giuseppe1374]

these tools have counters that allow you a certain number of scriptures after that you have to reload the micro to reset and starting of ac****

[frantik3]

exact!!!!!!

[michele30]

I know this, but I would like to know how to proceed in case of unlocking the scriptures, and if ake 85 I could go to the guide.
thanks

[ake85]

excuse where you purchased the product you have explained how to do it?

[ake85]

if I can do it willingly...I still I have to do it, but the guide that I have, I will explain step by step how to do it:cool:

8673

in the meantime, you need to plug everything in this way, then solder the pin strip to connect the flat cable to the j-link and the latter to the pc

[michele30]

but this j-link where can I find it?

[michele30]

but this j-link where can I find it?

[ake85]

I can't tell you where to find it-I'm sorry, now you want it too...and you told me that you wanted to help, not the j-link I close here

[rodcraft86]

the j-link ? inside in the package of kess, you don't have?

[michele30]

? a lot that I have Kess v2 and I have not found anything . Which version ? your? Rodcraft

[rodcraft86]

my ? the 2.06 has 3 months of life, probably you still have the version that after 60 the scriptures requires the replacement of the processor with a rewritable

[michele30]

Why? your instead, com'??
can you tell me the number written on the processor though ? equal? Why? I would also like to upgrade to 2.06 as my ? still a 1.89

[bmw320cd]

guys I open this post to ask for information, to read the complete c9 opel I know that ? need to go to bdm, but to write you can? also use the kess v2? let me explain, I see that the kess has enabled only the writing but ? able to write the complete file or just a part?

I realize that riesumo an old thread,but ? important to me....
ciaoo rodcraft86... I find myself in your same situation... to have the file ori full I had to read it in the bdm
now by making various changes I am tired of disassemble and reassemble each time the rear wheel to get to the ecu and write it in the bdm
then I wanted to write in obd with galletto v54 modified, the file read in BDM and modified by me
I read that it worked perfect and you have written the complete file in the obd right? given that we both know that this ecu has maps repeated several times

[passion engines]

but you're masochistic or what??????

[bmw320cd]

I had asked you before to ask you...