Sign in

View The Full Version : Who should serve place as the EGR OFF Renault Espace 2.2 150hp EDC15c3


emilground
23-09-2014, 12:21
With this change, the EGR is excluded and remains open to 100%, then ? need a plate for tapparla. Tested and working for months to 100%
ugoboss
23-09-2014, 12:47
if the valve ? ok no need tapparla, just unplug it with the bit of swich.
emilground
23-09-2014, 12:55
Once loaded, the change in automatic is always open and so on? resolves by putting a sheet (easy thing to do given the position of the valve). If, then, you mean to say that you can? remove just the plug on the EGR I don't know, have not tried, but it was seen that it was half-blocked, I put the plate
oakley1
23-09-2014, 13:10
Open head or closed to 100%??? Why? if it remains open, it seems a little strange as a solution
emilground
23-09-2014, 13:15
Remains open at 100%, but not d? pi? failure, so you just need a plate to close it, the rest of the plate, you put almost always to be sure that it is closed to the passage of the exhaust gases. The problem of this car ? that pulling on the line to the egr fails, then with this mod no more? spy on
oakley1
23-09-2014, 13:43
Perfect.. this is An unusual way to make a switch off, but if it works ? ok
gezame
24-09-2014, 01:01
if the valve ? ok no need tapparla, just unplug it with the bit of swich.

Hello
@ Ugo.
You have to disconnecting the eletrovalvule.
emilground
24-09-2014, 10:10
But if you disconnect the solenoid valve maybe ? stuck open and not put the plate, I know that the machine should not be.. so either connected to or disconnected from the sheet we want to
ugoboss
24-09-2014, 12:35
But if you disconnect the solenoid valve maybe ? stuck open and not put the plate, I know that the machine should not be.. so either connected to or disconnected from the sheet we want to

but, in fact, I have said that if the valve ? ok, you do the bit switch and then disconnect the connector because otherwise you'll always remains open, and she does not break more , if instead ? broken or blocked, we want to force the sheet.
legendaryslave
24-09-2014, 15:06
with this solution you need to unplug the electrical connector
radd7
22-12-2014, 11:53
I do not quite understand, after that ? done to make the switch should I disconnect the plug to not have abnormalities on the dash ? exact?
legendaryslave
22-12-2014, 13:55
I do not quite understand, after that ? done to make the switch should I disconnect the plug to not have abnormalities on the dash ? exact?

No need to disconnect the plug, otherwise it remains open valve and engine problems