opinion the map citroen c4 picasso edc15c34 16 hdi 110cv exchange fap aut

[andrew64]

hi I wanted your opinion on this mod, and what do you advise me the fap not been touched

file ori: https://www.professionalchiptuning.net/attachment.php?attachmentid=8473&d=1410723636

I attach the mod: 8474

[andrew64]

ecu edc16c34 typo
please admin if you can adjust

[andrew64]

no one expresses an opinion even if it is negative ?
maybe advising me question my car
and I would like to make a good map and do not combine the damage .

[voglioimparare]

hello, damages will not do. you have given little diesel,surely you can do more?. torque limiters same thing,you can safely give more?. also on the map the pedal you have given increments in a strange way.

hello

[andrew64]

thank you for your assistance
I went cautious because the car has automatic transmission and fap
what about the map pedal what do you mean by increments data in a strange way ?
how should I intervene?

[Ross]

with the increases the sar data? it's hard to hear the differences between the management of the original and the edited one.

[andrew64]

I kept low in order not to clog the fap

[Ross]

too low :D

[GPoint]

Hello, I do not know very well these ecu, just to understand something more? and be able to give you advice, map injection times (if I'm not mistaken the one that the ecm called injection with 5 similar maps) has a conversion factor? I can't seem to interpret the values.

Also, the address 1CD134 may be a limiter IQ?

[Driver]

Also, according to me, the increments are too soft and too high. The difference is not you feel so?. You can safely give more? on the diesel torque lim and rail pressure.

[andrew64]

ok, thanks a lighthouse in a second step so you can tell me if it's good enough

[andrew64]

the second step to you the opinions

[Driver]

According to me: injection Time you started getting too high and with increases in fluid pressures rail now sonio a little altine, lim torque is the same for an automatic transmission are high, maps padale you touched points in the negative, and anyway I do not seem to follow a logic with an increase in fixed as you've given.

[ake85]

rail pressure increases in points from 300 - 400 points
limiter always a p? most of the rail so if the rail you have 16000 16100 limiter
turbo pressure increases in a gradual manner, always in the points, then 50 80 100
torque increases in % starting from 1500 rpm then 20 % then 30 % and 20 %
injection increases in % in ascending and then 3% 5% 7% 10%
always have a look at the technical details of a car before you edit a file you can never go wrong

[andrew64]

I look at if I have the correct map, and if I do damage
with any tips on how to improve

[ake85]

I'm sorry I can't watch it, I don't have the limit of messages...my advice always look on the datasheet of a car and then look at the limits of its power and not to be afraid, so the new machines are so depotenziate that nothing happens finch? dies a component...when you change the table always go in 2d to see what you have done and fix well the curve in order to avoid that the machine is nasty...

[Driver]

Damage cos? don't do that, for? there is still time injection too minimum as a change and too high as the area of the change. On the rail, you can do better, and according to me you should work in percentage. Map pedal pu? to go, but you can do more? as increases. The 2 new maps for the turbo you can do the same and make eye to similar maps that are certain are unpacked there are mods in the negative, even in the kindred of the rail!! Limiters torque, you can do more? as the increase does not exceed 25%

[andrew64]

ok soon lighthouse' the changes and I'll check

[andrew64]

here is the mod

[Driver]

[ake85]

only pressure turbo and enrichment in acceleration you could do much better...but I have the rest goes well the basics are there, even if I repeat, you could do a lot better and fix things that I don't like.:)

[ake85]

then the advice that I can give you the torque limiters fix is always in 2d...

[andrew64]

ok thanks for the tip

[ake85]

[andrew64]

it is, in fact,
but at the moment I find it difficult? to use winools but as soon as they do? use

[andrew64]

I wrote the mod, everything went well, I feel the car, the car pulls
only complaints are that in the automatic gearbox ? faster I don't know if this ? a fault and how to remove
if someone enlightens me on