View The Full Version : Opinion the Map Alfa 147 1.9 140cv
Great , new turbo and counting the 229.000 km runs like a jewel
For me you have to be a beautiful p? of things, starting from the turbo up without reasons given diesel fuel. Check the peaks. Some of the curves after the pedal which, according to me could be gold. Limiter torque too soon and too high. If we talk about the car stock if you look at the discussions there, pull out a lot better
for? let's say they are on the good road right?
Take a look in the discussion on edc16 find them a beautiful p? stuff. In any case, you can give more? on the injection times and quantities? fuel, adjusts the torque request and the torque limiter, it lowers the turbo considers that the pressure already? salt with the diesel fuel, then the eye, do a log if you see that pike too to play with the maps of the geometry decrementandole a little bit. The maps lambda express it as the ratio between therefore, need to be decremented if you want to give diesel...
8354
the 147 and a car that also supports a remapp the most aggressive....I'm sorry that I can not download your ori file,but if you tell me with cossa to worked (winols or titanium) if and titanium, then tell me procenti ,load,pedal,etc,values,and I can tell you ok or not
yannsaba a reason...good advice...
as promised , this ? the second version ...
pdtechnology
27-08-2014, 08:59
hello dario, if I can give you my opinion I the map the rivedrei...the foot pedal you gave a % fixed and the 20 " I want to climb and adegurei the limiter therefore the turbo pressure, and the rail in the again, giving a max of 100 points for the first and 2% fixed to the second adjusting various limiters,and then for maps, the stock advances I miss them toccherei...not toccherei I miss the turbo for me, I do not have problems I would give it a bit more, diesel fuel is always controlling the smoke; hence the' and then I don't know if you know what are the mods made out of drivers.. I repeat ? only my opinion but according to me touch a little but good you have good results good job ciaooo
Hello pleasure looking at the map I can say that for me is missing out of the driver type limiter iq and these to make them go you have to touch the iq then I saw that sl turbo you have arrived even at 235 points, but the surge turbo you do not have the adequate pressure turbo that you have given with the rischioo of recovery and still on the turbo are missing map out of the driver to complete the editing performed on the pressure data, while the rail say it could go even if I do it in a different way by giving a fixed percentage, but each has a meotdo for their own account to map the rest as the times of injection you gave only 5 % homogeneously but should in my opinion give more? on a 25 % - 30% by adjusting the rpm and amount? diesel fuel, while on the advances you have given it 4 degrees ? according to me are well too especially if you have the original turbo, max I would give 2 degrees or better 1 degree and you have anticipated then it too is also on the increase starting from 17.50 mm3/cyc....In short, the load on the machine, and if maybe you want to experience, start slowly, maybe ask on the forum, surely some of the council will be? given on how to manage the parameters and, however, if you use the "search" button on the edc 16 c'? well a lot of to learn
I'm sorry, but if you read my response you see that I said the same things...or can I add that x maps the stock is not tocherei advances and iq limiter....I have given the board of moddare little but well...? always my thought is clear....
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.