special

as the title suggests seeking help for scodifica total renault megane scenic year 2002 1.9 dti that mounts to the engine control unit bosch 0281001809 msa15.5

thank you all in advance

glittering chiffon party dress.fitted

With immodec you will find all the explanations to do the work hello.

special

thanks for the reply if I'm not mistaken immodec is the scodifica partial I would need the total confirm?

glittering chiffon party dress.fitted

thanks for the reply if I'm not mistaken immodec is the scodifica partial I would need the total confirm?
Also the total

egs

That scodifica you can also try it to do. I tested on the same scenic drive and was not so good. Council to go safely install an emulator code. I've done a lot without problems.

special

thanks for the reply, I saw that there are 2 changes to the controller with pressure sensor and a sensor are different... you what problems you have encountered? the emulator where I can find it cheap?

alexracing

hi is made with e xxx works 100/100 already tested,the e xxx got it from ecuvonix

egs

The problem ? that the car wouldn't start. If the car ? from you, you can try that scodifica, otherwise, go to the emulator. you find them everywhere now, those who said alexracing are not bad, you can try those, but ? closed the company now.

obd75

I do 6-7 of this ecu, some are for? also, if you start not exceeded the 3000giri for? with immo3.2 c'? a solution where we must make a mod in the ecu and the probblema you ? resolved

special

I do 6-7 of this ecu, some are for? also, if you start not exceeded the 3000giri for? with immo3.2 c'? a solution where we must make a mod in the ecu and the probblema you ? resolved

I immo3.2 can you tell me how to recognize the unit with or without a pressure sensor as indicated on the software?

tezzero

The Scodifica do it only with the emulator for a few euros...

legendaryslave

no win for you, this you can also do without the emulator, there is the story of replace the 24c02 and raise the presser foot 7 and cortocircutarlo on 8 then they went out to cut two wires

tezzero

I did NOT know!!!!
but it is good to break the boxes????

jolidj

and bullshit, changes the e2p ,write the fail immo off , lift the pin 7 and I put in short-circuit with 8 so I will rewrite anything .
you save money x lemulatore.

legendaryslave

and bullshit, changes the e2p ,write the fail immo off , lift the pin 7 and I put in short-circuit with 8 so I will rewrite anything .
you save money x lemulatore.
it is an old car to throw the money on the emulator

special

I know I bought the e2p 24c16 as soon as the text everything and then place the result, and even some pictures if I ? allowed to place the file at least we facilitate the work to someone who needs it

special

anyone knows that with the change of the e2p then remain switched on the lights and if you are having problems in diagnosis?

special

will update on this scodifica, everything ? went to a good end by replacing the 24c02 with a 24c16 properly programmed ? must be made 3 changes on the control unit as indicated by immodec 3.2 if anyone needs place the file to upload and the photos of the changes.
thank you all for the suggestions, problem solved

fiko

hi special..I have the scenic ke door control unit as yours..then make me two straight thanks..