luca stanca mercedes sprinter 3.18 cdi

[sisco]

hello guys we have to defappare this mercedes sprinter 3.18 cdi 3000 cc, 184 hp edc 16cp31 engine no?642992
I have two software, which are 2 different things and I don't know which of the 2 should I trust them to try the file, or if you do not trust anyone of the 2
someone has already? done? just reading the serial, or we need to open the ecu? there are special considerations ?
sorry for the many questions I am attaching the link for the ori and the two mod
thanks to all

ori https://www.professionalchiptuning.net/attachment.php?attachmentid=8268&d=1405373438

[tecnoecu]

hello on this type of ecu the only solution ? work in hand, and no softwer is the file at 100% in the past me ? happened to unlock an ecu that previously a colleague of mine had stuck right after programming with the time. if you have doubts, ask the service ke offers the forum

[sisco]

ok thanks for the response, but if you do you will want to take a look at the mod?

[tecnoecu]

I'm sorry but no I have the permission to download the file

[sisco]

thanks guys, I arranged for now, the van is going, I keep it under control in time

[gianni1001]

Sorry may I know what kind of software you used .
?thanks a lot

[sisco]

the file that is currently loaded in the ecu ? a mixture of time + ecusafe I did several tests by removing or mettenddo portions of the changes made by the 2 files to the second of the lights turning on and what you could understand from the time of diagnosis, and this is why I said to keep it under control in time, the owner ? a customer trusted and I could do this

[gianni1001]

Right x understand how to act
You have first removed the errors with ecu safe and then you worked with?
Or read the file from the ecu and then modify it on the PC with both the programs in sequence?
Sorry but I have no experience with these programs, I would like to understand

[alien78]

if you have used those software surely you have removed the read dtcs..........

[gianni1001]

On a A3
I tried it with time to FAP
But on the instrument panel and remained lit the lamp for the Fap.
I tried to delete the error after you mod the file and the diagnostics do not give while in the instrument panel remained....

[gianni1001]

I explained to dogs.... I Hope you have understood the same.....

[sisco]

after several attempts ? loaded a file ori with the dpf processed either by time (does not erase the dtc in the post-injections) that ecusafe (erase all but the light comes on for the egr is active) and then processed in time for the elimination of the exhaust gas recirculation (indicator light turned off, but intermittent dtc in the ecu, not disposable) with egr open the 6.8% fixed.

[sno74]

Let's forget about Time and Ecusafe on these ecu mercedes is better to do a job well done...........
First reset all the Values fap and a nice forced regeneration then a file is done well and will recommend the service on-line, I say to you that from experience these if you don't do well, you go back in the vehicle with the warning light and reovery.............

[sisco]

hello Sno now and made the van and arrived at the garage and couldn't even move in the plane as it was clogged the fap, then regeneration issue to talk about it, the parameters that I could reset them I have cleared all, and as I repeat to you now is going to cos? and I keep it monitored then if I give? issues will be released?, I know already? the service from the forum because I have entrusted to them for a few ecu's that own no, I could n? I knew to do and I was fine, hello Sisco

[dangy]

considering that this is a very fair response