Immo off Nissan Cabstar 3.0

[Rebound]

hi all!
I have to scodificare ecu Nissan Cabstar 3.0 for problems in the code key...
I tried another kit and it all starts quietly.
The ecu in question ?: Bosch 0281010452.
Many say there is no need to emulator special, I did a test and the machine ? the game quietly for 3 times; then not ? more game...
C'? chance? without the emulator ? Can I block the writing of e2p in such a way that parts always?
in the annex, the reading of the flash and the e2p and the test is made on the e2p.
thanks!
8329

[faberecu]

that eeprom are you ?

seen... 24c04 then you will get a 24c16, write it as 24c04 raise the presser foot 7 from the pcb and connect it with 8
you have done wp , or perndi a 24c04 atmel and programmala wp (write protect) solved...

[Rebound]

written 24c16 lifted pin 7 connected to pin 8 of the e2p: the cabstar ? party without a ring, then it turns off...
advice?

[faberecu]

take pictures of the mod please eeprom

[legendaryslave]

hi all!
I have to scodificare ecu Nissan Cabstar 3.0 for problems in the code key...
I tried another kit and it all starts quietly.
The ecu in question ?: Bosch 0281010452.
Many say there is no need to emulator special, I did a test and the machine ? the game quietly for 3 times; then not ? more game...
C'? chance? without the emulator ? Can I block the writing of e2p in such a way that parts always?
in the annex, the reading of the flash and the e2p and the test is made on the e2p.
thanks!
8329
scivi that file and Program the EEPROM 24C04

Only for Nissan Almera
Notes: turn up the pin 7 of the eeprom and connect it to pin 8.
In this way, it will block the write counter to boot.
try

[Thinkpad]

hi all!
I have to scodificare ecu Nissan Cabstar 3.0 for problems in the code key...
I tried another kit and it all starts quietly.
The ecu in question ?: Bosch 0281010452.
Many say there is no need to emulator special, I did a test and the machine ? the game quietly for 3 times; then not ? more game...
C'? chance? without the emulator ? Can I block the writing of e2p in such a way that parts always?
in the annex, the reading of the flash and the e2p and the test is made on the e2p.
thanks!
8329

Hi, did you find solution for this ECU?

[Marting]

try turn up the pin 7 of the eeprom and connect it to pin 8.

[dangy]

considering that this is a very fair response