Purchase Interface

[flamingsn3Ak3r]

Hello to all!

I came to the decision to finally take the cables to communicate with the ECU for? re-reading after some time of idle?

there have been changes.

Therefore, I state that I would do my tests on a Punto 1.3 MJT from 75hp 2008 (HW and SW at the time unknown)?

my intent ? then be able to work on all of the ECU.

I was convinced to take a MPPS V13 (even now I feel that ? the output V18) or the Galletto 1260 (but for now, they all say that ? from store

why? many problems), alternatives?

Another factor to consider ? that, for the moment, I'm still not convinced of the read/write BDM, in the sense that I don't know how it works yet,

then I would do what is pi? simple: the cable works in a serial (and then MPPS if I'm not mistaken), software to remap (ECM winOLS or other) and rewrite with the usual interface.

The problem lies in the fact that I'm scared of the block, why? maybe the interface is not ? fit to the vehicle.

PS: my intent ? buy less cables as possible (do not take duplicates or cables obsolete or non-functioning).

Greetings!

[ugoboss]

the parts, from the fact that your machine does not act in the serial but you can only write with certain risks if it is done with the tool is not good, the galletto 1260 ? old and outdated, and in its place now ce the new fgtech v53-v54 and perhaps other future versions ,which are good are also readings in bdm but you have to know where to buy breast', you run the risk of buttere money because of the components is poor, the MPPS I have stayed at the versdione v5 that was good, but that ? now obsolete, the latest version I don't know which machines to cover this ? what I can think of to tell you, if I were you, I would wait a little, and in the meantime, I'd have a bit of experience reading the various posts dedicated to the interfaces.

[flamingsn3Ak3r]

the experience, as you said yourself, you do it by reading, and rightly so, but I want to now throw me with the practice senn? will not go? pi? of much next.
With regard to the reading and writing then I can't do it with the MPPS? I have to buy the cock V54 with its template and schedule? in addition, with the v54
I would do pretty much the most of the car? thanks.

[ugoboss]

the experience, as you said yourself, you do it by reading, and rightly so, but I want to now throw me with the practice senn? will not go? pi? of much next.
With regard to the reading and writing then I can't do it with the MPPS? I have to buy the cock V54 with its template and schedule? in addition, with the v54
I would do pretty much the most of the car? thanks.

theoretically, it is always that all it.

[flamingsn3Ak3r]

The one you are referring to the whole, therefore, the purchase of accessories and car park, or on only one of them?
Possibly the link where to buy?
Thanks!

[enzopezzano]

With the v54 just a serial port. Virtual read, and the file of 2 Mb, and always write by obd. The fa well as the v50.

[flamingsn3Ak3r]

how do I know if the interface ? very good bill?

[enzopezzano]

Question to 1,000,000 euros. If you know the seller ? gi? an indication, the price which, if too low you should not trust, and who together with the tool also provides you with technical support.

[flamingsn3Ak3r]

I remembered that inside the forum there was a shop, but can't find it.
you where you bought it?

[francescosparco]

hello.. I believe that if you want to work with the clones you need to buy more than one... I exactly I'm having fun with the mpps and the cock 2 v50 . the galletto 1260 don't do it right now and the past of fashion

[flamingsn3Ak3r]

wait, but then the v54 you intedeva the original one, and not the version clone?
why? if I got the Cock v54, of course, I would have taken what you find on the internet and not the original version which has a cost absolutely the most high!

link deleted

this, for example, what do you think, even for the price of course.
the seller seems very serious

[francescosparco]

All cloned to sti prices

[flamingsn3Ak3r]

what ? clone ? obvious, but then you are talking about, buy the original interface?

[francescosparco]

Should be fine, many clone. Depends on dv to buy them

[flamingsn3Ak3r]

excuse the question insistent, you where to buy them? thank you for the answers

[francescosparco]

I don't think by regulation, I can do publicity

[flamingsn3Ak3r]

you can send me a message in MP?

[francescosparco]

Ask the administrators if I can

[leandro89]

insert links to products related to the chiptuning ? prohibited by regulation cos? as in the forum you can send pm.
user flamingsn3Ak3r for this time you get a call, and I invite you to read the rules. Are you ir? careful next time

[flamingsn3Ak3r]

you excuse me, are not very practical forum I was trying to make comparisons

[enzopezzano]

The v54 and the clone pi? complete . You have practically all the methods of work on the ecu.

[flamingsn3Ak3r]

That surely ? a question, somewhat rhetorical, and gi? explained:
But the difference between the original and the clone ? only the reliability??
why? personally, I can't remember the exact price of the original but it was very high)
the expense is not worth the yield

[Backgroop]

Guys be careful with clones, I was testing a v53 and I made out a ecu edc17c18 of an opel the problem were the connections of the wiring, the cable boot was connected to 12v, the result 1200€ ecu new and encoded in opel, now use only equipment official

[flamingsn3Ak3r]

how long ago did you buy the interface?
since, I assume, that now you are a little specialized all the various manufacturers of clones

[darioz90]

[flamingsn3Ak3r]

excuse the question, but if I take the V54 doesn't do the usual things of the MPPS?

For the kessV2 not c'? the problem of the 50 scriptures? or ? been resolved?

[darioz90]

the mpps can? always serve to do some drive old
the v54 ? complete and also makes the reading of "virtual read" for those stations not ? can read
the kessV2 I think the most stable, but you have to be a hair geeks to reset the 50 scriptures you can weld on kess to re-program it and use the right files in the SD card
(the problem principare and inhibit access to the internet at the k-suite software that you simply have to use the windows firewall)

[flamingsn3Ak3r]

How much ? for MPPS "Old"?

[Driver]

[enzopezzano]

The v54 making machines"old".

[flamingsn3Ak3r]

then the MPPS is not used to a jot if you have V54,
With regard to the quality? ? a risk that is incurred always

[enzopezzano]

You do not need. The risk of blocking pu? happen with the equipment officer. I have alien and a few days ago I was stuck in writing a Mj8df of a 500L.

[Driver]

The bad luck can happen to anyone, of course with the equipment officer should be more on the safe side... still have even more different clones can sometimes come in handy. Sometimes the captain ecu with the cock, and with mpps...

[fabiovts88]

what do you think of the kess v2 clone?

[Driver]

From what I have heard around looks good, in fact, rro tried I also take it. But if I am not mistaken, the ec has to fiddle around a bit to make it go, or to reset it, it seems to me...

[darioz90]

yeah , if you want to use the clones prentelo however mpps12,gallo54 and kessV2 cos? if you are having problems with interface you have more solutions!

[darioz90]

I reset it I have changed the case (cut with the flex) and soldered the pins to the j.tag on kessV2... it works great!

[flamingsn3Ak3r]

with this change, what would you have done?
have you made more? stable or you reset the scriptures?

[darioz90]

according to me if you buy from the right seller are ultra stable!
the kessV2 pu? have problems to counter the scriptures , but if you weld the pin to the j.flash you can reload the firmware when you want to

[catrica]

Sorry, I have the Fgtech v54, I turned to an expert for the purchase of the mpps and told me that ? useless, the fgtech ? pi? complete, I have recommended the KWP 2000 and told me that the old I did it all, I have not purchased from him, to me ? seemed honest since he was selling the mpps, the kwp had not told me lies?

[rodcraft86]

the kwp is the ecu pi? the old but also the rooster, however, you told the truth?, the mpps ? obsolete and often of poor reliability

[darioz90]

also depends on the type of quality? the mpps ... I v12 I think a bomb on some of the ecu!