read and write audi A4 avant edc17

[alfetta80]

good morning to all!!!
guys should I exclude the egr valve on this machine, but according to you, with v53 I can read and write to a serial port without having problems??audi A4 avant 2.0 TDI 16v year 2011 CAG is a bosch edc17 thanks!!

[corrado]

How ? was recommended to me, I think that in the serial not you should try it , disassemble and do the BK.... even if I can tell you that I, with the v54 I tried to write it in the obd but nothing ... read no problem .
The other thing that s? if you close the valve you should also luca stanca
I hope I'm not wrong , you can wait for other advice ;-)

[ugoboss]

dismount and take a reading in bootmode and if you want my advice, write in the boot.

[alfetta80]

thanks guys for the answers!!!!and instead, when it comes to a golf 6 siemens v53 tells me to read and write yes Flasher+Boot Tricore what does that mean?

[cinqueturbo]

thanks guys for the answers!!!!and instead, when it comes to a golf 6 siemens v53 tells me to read and write yes Flasher+Boot Tricore what does that mean?

Flasher= OBD=Serial..
Boot Tricore= Boot Mode Tricore processor= Work Bench..

[alfetta80]

then this machine golf6 1600 tdi 16v siemens we can do in the serial???

[cinqueturbo]

then this machine golf6 1600 tdi 16v siemens we can do in the serial???

Yes.. but it is good to do a BK a tour and s? I can't PCR2.1 must first be unlocked and then you can? work from the serial..

[alfetta80]

thanks cinqueturbo!!but this unlocking procedure should be done only because I use a v53, or there are programmers who can without unlocking??

[cinqueturbo]

thanks cinqueturbo!!but this unlocking procedure should be done only because I use a v53, or there are programmers who can without unlocking??

No, not a problem of the v53, but the anti-tuning of the Siemens PCR2.1..
then if the other instruments in the release they also do serial do not know...
word to the experts..
I'm not there? even put your hand on this..

[dvdtuning]

I don't know if the x17 makes the counter without solder wire and resistance only with the connector on the front panel...I would not say a caxxata.
However, do not ? complicated to make it to the bench with the v53

[alfetta80]

guys but once unlocked you can read and write easily with v53?????

[ugoboss]

guys but once unlocked you can read and write easily with v53?????

if you talk about the prc2.1 ,you have to do to force eobd after unlocked, the quietly then depends on the interface.

[alfetta80]

hello ugoboss...and then open the breakouts, the re-mounting, and then read and write, right?

[dvdtuning]

is this exact ? the procedure for the prc 2.1

[alfetta80]

all clear!!!!!thanks to all!!!!!

[gezame]

Hello
No, with x17 for sblocare ance you need to do a tour and solder the wire.